Bushings

We are specialized in manufacture and export Self-lubricating Bearings, Needle Bearings and DU Bushings.

专业生产各类轴承, 滚针轴承,自润滑轴承,提供优质的服务,上成的产品!

Bronze Bushings: High side load capabilities, self lubricating, long life.

青铜衬套: 高侧的负载能力, 自润滑, 寿命长.

Optimization of Casting Process for Manufacturing Babbitt Metal Bearing Bushings Used in Diesel Engines and Experiment Verification

柴油机轴瓦巴氏合金浇注工艺优化及试验验证

In the automotive industry only fasteners, bearings, bushings, chains, and belts are standardized.

在汽车工业中只有紧固件、轴承、轴衬、链条和皮带是标准化了的。

fastening of the taper lock bushings of the drip tray

接液盘的锥套的紧固

Material Selection of the Bushings for Sink Rolls on HGL

热镀锌机组沉没辊轴套材料选择研究

a punch holder mounted to the upper shoe holds two round punches (male members of the die) which are guided by bushings in the stripper.

阿冲持有人安装在鞋子上拥有两个圆形冲（男会员登陆的死亡）是由在脱衣舞衬套指导。

Bushings should not remain installed during overhaul unless retained by specific CMM requirements.

除非CMM中有特殊的要求,衬套不得在原位大修.

It is a specialized manufacturer that produces wearing parts like fixed bushings and removable bushings.

系生产轴承附件——紧定衬套、退卸衬套、轴承座系列产品的专业厂家.

Analysis on Wear Mechanism of the Bushings Used in Sink Roll of CGL

热镀锌机组沉没辊轴套磨损机理分析

high and low voltage bushings are omni-sealed, glass peephole is installed in the outlet box in order to see the operation process.

高低压套管实物全封闭，出线盒上半置了玻璃观察孔，能够在运行中观察出线盒中的工作情况。

Cycloaliphatic epoxy for Outdoor application for Transformers, Bushings etc.

环状脂肪族树脂,用于户外变压器和套管.

bushings must be taken to a reprocessing plant .

套管必须送到再生工厂。

Bushings that are too large will result in bellmouthed or out-of-round holes.

太小的轴衬会造成工具的阻滞和破断.太大的轴衬会造成喇叭口或不圆的孔.

We provide one-stop solutions of aluminum tubes, bushings and brackets for NVH application.

我们提供汽车NVH部件铝制内外管 、 衬套及支架零件等全方位解决方案.

temperature control system for platinum-substitute crucibles and bushings

代铂坩埚和漏板的温度控制系统

Lead used in lead-bronze bearing shells and bushings;

铅-青铜轴承壳套和轴衬中使用的铅；

The investigation of flashover on HVDC wall bushings under nonuniform rain carried out by the EPRI in recent years is summarized.

本文介绍了换流站直流穿墙套管非均匀淋雨闪络试验研究的成果。

The molten glass flows through orifices and temperature resistant bushings at the base of each furnace.

熔融的玻璃液流过喷丝头以及熔炉底部的耐高温衬套.

Upper and lower bushings are standard for smooth valve operation.

上部和下部衬套符合流畅平稳轻松操作阀门的标准要求。

level3: tolerance matching of freewheel bushings. factory only.

级别3：飞轮轴套的公差矫正。只有工厂可以操作。

Cable-wound triple-chime movement with bronze bushings and stainless steel pivots.

索伤口三重附和运动与青铜衬套和不锈钢支点.

Through the analysis on the result of calculation a thorough discussion has been carried out on the effect of air film on the back of bush for bushings with elastic or rigid support.

通过计算结果分析，对弹性支承和刚性支承的瓦块的瓦背气膜效应进行了深入探讨。

Therefore the bushings, bearings, cam apertognathia, needle roller bearings and other parts must be intact.

不新各轴套 、 开牙轴承 、 凸轮 、 滚针轴承等部件务必安然无恙.

Worm wheel and gear transmission with long-life bushings, so that the machine is durable.

蜗轮蜗杆同步传动,长寿命轴套, 机器经久耐用.

design of automatic die carrier for assembling the bushings into guide sleeve

压装导向套内衬的自动模架的设计

Analysis of additional losses at the bushings of a three phase large power transformer

大型电力变压器套管升高座中附加损耗分析

the correlation between pre-compression and stiffness of cylinder profile rubber bushing was studied through combination of practical analysis and theoretic analysis, the influence of pre-compression on the fatigue life of the bushings was tested and analyzed.

用实验与分析相结合的方法，对圆筒型橡胶球铰预压量与产品各向刚度的关系进行了对比研究，并分析了预压量对产品疲劳寿命的影响。

Because of low mechanical strength and limited production of shed, composite external insulation devices, which are under development, can only be used in class I contamination areas. However, composite wall bushings meet class II outdoor requirements.

研发阶段的合成外绝缘设备由于其机械强度以及伞裙外形生产受限，仅能适应I级污区，但合成穿墙套管能适应II级污区的户外要求。