EPDM

EPDM is a terpolymer elastomer made from ethylene-propylene diene monomer.

epdm是一种由乙烯 - 丙烯、二烯单聚物构成的三元共聚物弹性材料.

Application of Domestic EPDM

国产EPDM应用研究

Study on properties of halogen-free flame retardant EPDM/ PP TPV composite

无卤阻燃EPDM/PP TPV复合材料的性能研究

Three options for resilient seat materials ( EPDM, NBR and FKM ) and two packing options are available.

有三种弹性阀座材料 ( EPDM, NBR和FKM ) 以及两种密封填料可供选择.

A polystyrene ( PS)/ EPDM blend formed in situ by Friedel-Crafts alkylation in melt state was developed. The effects of the type and addition level of Lewis acid and the temperature and time of mixing on the properties of blend were investigated.

在熔融状态下，利用Friedel-Crafts烷基化反应原位生成聚苯乙烯（PS）/EPDM共混物，考察路易斯酸品种、用量、混炼温度和混炼时间等对共混物性能的影响。

An extruded self adhesive tape for lap seam of EPDM sheet has brominated butyl rubber as main ingredient and appropriate aids.

介绍了一种以溴化丁基橡胶为主体材料，加入适当的化学助剂，经挤出成型的三元乙丙橡胶高分子片材搭接缝用自粘胶带。

TM is the series of rubber EPDM products.

二.TM系列为三元乙丙橡胶(EPDM)产品系列.

EPDM is rated at 250 H intermittent service and 225 H continuous service.

在间歇流动的流体中,epdm的温度上限是250℉,而在连续流动的流体中,其温度上限是225℉.

Do not install EPDM liner in compressed air lines.

在压缩空气管道中不要安装EPDM衬垫的阀门.

Compared with diolefine rubber, EPDM has less double bond.

与二烯烃橡胶相比, EPDM的双键很少.

EPDM has good abrasion and tear resistance and offers excellent chemical resistance to a variety of acids and alkalines.

EPDM具有良好的抗磨损和抗撕裂性能，以及优秀的抗酸碱化学腐蚀的性能。

The results showed that SEP had better toughening effect than EPDM.

结果表明,SEP比EPDM具有更好的增韧效果.

Effect of blending ratio on properties of EPDM/ IIR inner tube

并用比对EPDM/IIR内胎胶性能的影响

The properties and uses in the architecture for a new generation of thermoplastic EPDM rubber ( Santoprene) are reviewed.

综述了新一代热塑性EPDM橡胶（SANTOPRENE）性能，并介绍其在建筑上的应用。

The coupling agent A-172 had a more significant modifying effect and gave EPDM vulcanizate much higher tear strength;

偶联剂A-172的改性作用较为明显，可显著提高EPDM硫化胶的撕裂强度；

All wetted rubber parts shall be manufactured from silicone or chloramine resistant EPDM rubber.

所有湿橡胶部件应该采用硅酮或抗氯胺三元乙丙橡胶(EPDM)制造.

But the tensile strength of POE compound decreased dramatically at high temperature, and its tear resistance was somewhat lower than that of EPDM or SBR compound;

但是在高温下POE的拉伸性能下降较大，其撕裂性能略低于EPDM和SBR胶料；

Do not use Vaseline or other petroleum-based products on EPDM seats.

在三元乙丙橡胶(EPDM)阀座上不要使用凡士林或其它石油基产品.

EPDM should not be used on compressed air lines.

EPDM不能使用在压缩空气管道上.

Preparation and Properties of Dynamically Vulcanized Flame Retardant PP/ EPDM Thermoplastic Elastomers

PP/EPDM热塑性弹性体动态硫化阻燃材料制备及性能研究

The optimized formula was obtained by the fictitious target method and multi property policy making method in the multi target optimization method based on the property composition regression equation of EPDM formula.

根据EPDM配方性能组分回归方程式，应用多目标优化方法中虚拟目标法和多属性决策法寻求最优配方。

And at the same time the Shore A hardness of EPDM vulcanizate increased gradually and its tensile strength and elongation at break increased at first, and then decreased.

随着Zn（MAA）2用量的增大，EPDM硫化胶的邵尔A型硬度逐渐增大，拉伸强度和扯断伸长率都是先升高再下降。

Sulfonated EPDM ionomers ( S-EPDM ) were prepared with concentrated sulfuric acid and acetic anhydride.

用浓硫酸和醋酸酐与三元乙丙橡胶(EPDM ) 反应制备了磺化三元乙丙橡胶离聚物 ( S-EPDM).

Thermoplastic Elastomer EPDM/ PP Prepared by Complete Dynamic Vulcanization: Relationship between Its Textile Structure and Its Tensile Creep Behavior

动态全硫化热塑性弹性体EPDM/PP的织态结构与拉伸蠕变特性关系的研究

It was clear that the tensile creep behavior of EPDM/ PP was influenced by the PP matrix.

EPDM/PP的拉伸蠕变特性受其PP连续相的影响。

Besides, the property of resistance to oil of EPDM and PE blend is tested after radiation.

此外, 还测试了EPDM和 PE共混物经辐照后的耐油性能.在此基础上,制得了手感柔软的热收缩管材.

The results showed that POE was superior to EPDM on processability and toughening effect.

研究结果表明,POE在加工性、增韧改性等方面比EPDM更具有优势.

A one-component contact adhesive based on modified bromoinated butyl rubber for seaming EPDM roofing membrane was developed.

研制了一种单组分三元乙丙防水片材接缝用接触型胶粘剂。

The blend of acrylate rubber ( ACM ) and ethylene propylene diene terpolymer ( EPDM ) was prepared.

以丙烯酸酯橡胶 ( ACM ) 和三元乙丙橡胶(EPDM ) 为主要原料制备共混材料.

Now generally used PTEE, EPDM and other material for the valve seat, so bubbles leakproofness good.

现一般均使用PTEE 、 EPDM等材料,为阀座, 因此,气泡密封性佳.