FMEA

Taking FMEA of fuel-metering system of jet plane engine as an example, failure infusing of functional role model, setting-up model of failure, and process of fault analysis was introduced.

并以飞机发动机燃料计量系统FMEA为例，阐述了功能角色模型的故障注入和故障模式的建立，以及故障分析过程。

Follow the FMEA issues as coordinator between plant and field.

作为工地和工厂之间的协调员跟进客户投诉.

Using of the FMEA results, the and measures are suggested, and the system reliability is grown.

根据分析结果, 提出了全动平尾操纵系统在设计、生产和使用中应采取的质保措施, 使系统的可靠性得到了增长.

Knowledge in quality system administration, ISO 9000, QC tools such as SPC, FMEA, etc. and metrology.

熟悉质量体系管理 、 ISO9000 、 质量控制工具(例如SPC, FMEA等)和测量技术.

Are process capability studies including Failure Mode Effects Analysis ( FMEA's) conducted where applicable?

如有需要，是否都进行了包括失效模式及后果分析在内的过程能力分析？

The key characteristic what the drawing of the customer regulated all transplanted with equivalent, and revised the relevant drawings, FMEA, artwork, control plan and the operation instructor.

顾客图纸规定的关键特性，全部等效移植，修订相关的图纸、FMEA、工艺、控制计划和作业指导书。

A FMEA is potentially one of the most beneficial and productive tasks in a well-structured reliability program.

在完善架构具可靠性的计划中，fmea是最具效益和生产力的作业之一。

Support customer complaint resolve on FMEA and provide corrective action on water system as needed.

根据需要协助客诉失效模式分析并提供水系统相关的改进解决方案.

Quality Close Loop Management System comprises FRACAS technology and FMEA technology, on the use of workflow tech-nology. Discuss importance and urgency of enterprise carrying out Quality Close Loop Management System.

产品质量闭环管理系统是以FRACAS技术和FMEA技术为主，工作流技术为辅的质量管理平台，讨论了企业实施产品质量闭环管理系统的重要性与必要性；

Design and fabrication with FMEA and Safety protection.

采用失效模式分析和安全意识的设计和制造.

PRA development include event tree analysis, fault tree analysis, FMEA analysis, PRA quantification and equipment reliability data base.

其关键技术包括：事件树分析、故障树分析、FMEA技术、设备可靠性数据库以及PRA定量化计算等。

In this paper, a novel FMEA technique based on Functional Role Model ( FRM), which can be performed from the concept design stage of weapon system thanks to its "Top-Down" ideology and therefore advantage BIT design, is proposed.

基于功能角色模型的故障分析方法采用自上而下的思想，在系统设计开始时同步进行故障模式影响分析，这对BIT设计是有利的。

The concept of FMEA and its application in maintenance management of equipment are explained in detail.

对故障模式及影响分析(FMEA)的概念及在设备维修管理中的具体应用作了较为详尽的阐述.

Because failure effects in the FMEA analysis table are ambiguous and difficult to effectively estimate, Fuzzy evaluation method is proposed.

针对FMEA分析表中失效影响存在较大模糊性而难以有效估计的特点，引入模糊评估方法来进行分析。

The methods that organize knowledge with frames based on product structure tree model, establish diagnostic rule with FMEA information and reasoning strategy were discussed. A certain train automatic door was analyzed by the method.

研究了基于产品结构树模型的框架知识组织方法，并探讨了由FMEA信息建立诊断推理规则及推理策略，最后以某列车自动门系统为例进行诊断分析。

Make, revise and maintain flow chart, FMEA and control plan.

编写 、 修改和维护流程图 、 FMEA和控制计划.

Familiar with methods of 8 D-report, statistics-SPC, FMEA, Audit, Capability analysis, problem solving methods etc.

熟悉各种质量方法(8D报告, 统计-SPC, FMEA, 审核, 能力分析, 问题解决方法等).

The Six Sigma Black Belt will demonstrate the ability to read an FMEA analysis.

6西格玛黑带应能示范其理解FMEA分析的能力.

With new product development process, the potential failure modes and effects can be found to complete FMEA analysis and RPN ( Risk Priority Number) evaluation.

结合新产品开发过程中的潜在故障模式与影响，完成FMEA分析，评估风险顺序数（RPN），根据风险的高低，提出改进措施和执行计划，并跟踪实施效果。

Overall responsible for all molding process documents maintain, PFMEA update and optimization.

负责整个注塑制程的文件维护, 过程FMEA的更新和优化.

To applies SPC tools and P-FEMA to make sure process stability.

运用SPC和P-FMEA等数理统计工具确保制程的稳定性.

Role and implementation of FMEA in electronic engineering

电子工程中实施FMEA的作用和技术途径

Through the application of FMEA, the failure modes of the various components in governor valve control circuit and their impacts is analyzed, then the related FMEA forms are obtained.

应用FMEA方法，分析了调节汽门控制回路各组成部分的失效模式及其影响，得到了相关FMEA表。

Follow the improvement actions defined in FMEA report and avoid issue recurrence.

跟进相关部门的改善行动,避免类似问题重新发生.

FMEA Application in the Deflection Yoke Design and Development

失效模式分析在偏转线圈设计开发中的应用

The Six Sigma Black Belt will demonstrate the ability to read a FMEA analysis.

译文:六西格玛黑带能示范其理解FMEA分析的能力.

For the purposes of meeting market demands, a new viewpoint that conduct the research on product reliability engineering based on 3F technology ( namely synthesis of FMEA, FTA and FRACAS technologies) to improve product reliability was proposed.

为满足市场需求，提出基于3F技术（即综合FMEA、FTA和FRACAS三种技术）开展可靠性工程研究，以提高产品可靠性的思路。

As to reliability growth management being an uncertain decision based on imperfect information, FMEA and fault diagnosis model have been built for liquid rocket engine.

针对液体火箭发动机可靠性增长过程管理是不完备信息下的不确定性决策问题，分别建立了液体火箭发动机的FMEA模型和故障诊断模型。

Potential Failure Mode and Effects Analysis ( FMEA) for Loudspeaker

扬声器潜在失效模式及后果分析

Must have perfect SPC, DOE, FMEA knowledge and practical experience.

具有良好的SPC 、 DOE 、 FMEA知识和实际应用经验.