Slice Thickness

the effect of the slice thickness, oil temperature, frying time, vacuum pressure and deoil conditions on the product quality was investigated. the best process condition was confirmed.

主要研究了切片厚度、油炸温度、油炸时间、真空度以及脱油条件对产品品质的影响，确定了最佳工艺参数。

Decreasing the slice thickness can make up for the loss of scanning with low exposing dose, and scanning by low exposing dose with thin slice thickness is superior to scanning by standard dose with routine slice thickness.

减薄层厚可以弥补低剂量扫描的不足，低剂量薄层厚扫描筛查肺结节优于常规剂量常规层厚扫描。

quality of strawberry chips produced by explosion-puffing drying technology is effected by slice thickness, moisture content, operation temperature and pressure difference.

以产品膨化度、复水比和感官品质为评价指标，研究切片厚度、预干燥物料水分含量、膨化温度及其压力差对气流膨化草莓脆片的影响。

scan parameters such as nex, scan matrix and slice thickness were altered.

改变的扫描参数有NEX、扫描矩阵和层厚。

the sir decreased with te, slice thickness.

随着回波时间、层面厚度增加，SIR值减小。

conclusion msct can be used to evaluate the stent status, but the stent material, stent diameter, stent strut and reconstructed slice thickness should be considered.

结论MSCT可以对冠脉支架的形态进行评价，但其成像受支架材料、内径及重建条件的影响。

study on the throttle valve slice thickness and aperture of hydro-pneumatic spring

油气弹簧阀片厚度与节流缝隙的分析研究

objective: to measure the slice thickness of ct scanners automatically, and compare the automated results with manual results.

目的：采用自动检测程序测量CT设备中的层厚，并把其结果与手动测试结果相比较。

slice thickness measurement and its improvement for mri

磁共振成像层厚测量技术及其改进

results: the thinner scanning slice thickness, the higher score of mpr imaging with the same interval reconstruction.

结果：在相同间隔重建的MPR图像中，以层厚越薄得分越高。

the value of multislice ct with different reconstruction slice thickness in diagnosis of pulmonary embolism

多层螺旋CT不同层厚重建方法在肺栓塞诊断中的价值

the accuracy of ventricular volume measurement and the optimal slice thickness by using multislice helical computed tomography

多层螺旋CT计算心室容积的准确性及最佳层厚选择

the results showed that the image quality of 2. 5 mm slice thickness, 2. 0 mm bed increment and overlap scanning is the best.

通过对165例图像质量进行客观评价，对扫描方法和效果进行对比分析，结果2.5mm层厚床进2mm重叠扫描图像效果最好。

[ conclusion] the geometric error of axial image reconstruction increases with the increase of ct scan slice thickness, due to ct partial volume effect.

[结论]重建CT图像的前后方向的几何误差是随着扫描层厚增加而增加，主要是由于CT扫描的部分容积效应影响。

reconstructed field of view was 9.6 cm; reconstructed slice thickness was 0.625 mm; and reconstructed interval space was 0.2 mm.

双侧分别小视野骨算法重建，重建视野为9.6cm，重建层厚为0.625mm，重建间隔为0.2mm。

the value of different reconstruction slice thickness of multi-slice spiral ct ( msct) in diagnosis of bronchiectasis

多层螺旋CT不同层厚重建图像对支气管扩张症的诊断价值

comparison study of the detection of pulmonary nodules by using different slice thickness of mdct and the role of ct in the qualitative diagnosis of spns

多排螺旋CT不同层厚重建技术对肺内结节检出的比较研究及对SPNs定性诊断的价值

Optimum design of throttle slice thickness and its characteristic test for telescopic damper with damping matching

最佳阻尼匹配减振器阀片厚度优化设计与特性试验

it was influenced by microwave power, slice thickness and shape to different extent.

实验发现，微波功率、物料切片厚度和切片形状对干燥产品品质均有不同程度的影响。

detection of normal pulmonary arteries using different slice thickness ctpa imagings

不同层厚的CTPA图像对正常肺动脉分支的显示

to compare the visibility of subsegmental pulmonary emboli by different slice thickness reconstruction using multislice spiral ct pulmonary angiography.

比较多层螺旋CT肺动脉造影不同层厚对亚段肺动脉栓塞的显示能力；

the effects of slice thickness and reconstructive parameters on vr image quality in multi-slice ct

多层CT扫描层厚、重建参数的选择对容积重建图像质量的影响

the computation methods of electromagnetism parameters, electromagnetic wave frequency and medium slice thickness in microwave measuring for composite material were analyzed.

分析了复合材料微波检测中电磁参量、电磁波频率和介质薄片厚度的计算方法。

results the slice thickness, reconstructive thickness and reconstructive interval did have effects on vr image quality and the effective degree was different.

扫描层厚V1、重建层厚V2、重建间隔V3对重建的VR图像质量影响程度存在差异（P

Analysis on Slice Thickness of LOM Based on Large Thickness Slice for Metal Function Part

大厚度金属功能零件LOM技术的层厚分析

methods 37 cases were examined by orthopantomography and helical scanning of multi-slices spiral ct with 1.25 mm slice thickness.

方法37例患者均行曲面体层片和多层螺旋CT轴位扫描，层厚1.25mm，采用最大密度投影（MIP）、表面遮盖显示（SSD）和多平面重建（MPR）技术对图像进行重建。

objective to study the influence of various doses and injection rates of contrast agent and slice thickness on hepatic perfusion ct with a deconvolution mathematical model.

研究目的：探讨去卷积法肝脏CT灌注成像时对比剂剂量、注射流率以及层厚对灌注参数值的影响；

these 326 cases were divided into 6 groups according to different delay times, intravenous injection rates, reconstruction slice thickness and scanning methods.

有10例作了DSA检查，14例有手术结果对照。将326例按照不同的延迟时间、注射流率、重建层厚、扫描方法分组研究。

the smaller slice thickness is, the smaller roughness is.

切片层厚越小，表面粗糙度值越小。

methods multi-slice ct scan was applied on a rubber dinosaur model with different slice thickness.

方法应用多层螺旋CT以不同扫描层厚对模拟病变的橡胶恐龙模型进行扫描，以不同的重建层厚和重建间隔重建出容积重建图像。