Z-axis

Pitch and Z axis separate control.

节距Z轴独立控制.

The approach is to solve z-axis coordinate according to the sensed x-axis and y-axis coordinate data, as well as the spherical geometry relationship analysis, the orientation matrix describing the spherical motor motion can be given and solved based on the screw theory.

这种方法是通过球面的几何关系，由检测到的x和y坐标方向的位置数据计算出z坐标方向的数据，并根据旋量理论建立球电机运动的旋转矩阵和计算出旋转矩阵的旋转角度。

Console: Console include 2 D, Z axis, marking the first air Surge filters.

1主机: 主机包括二维 、 Z轴 、 打标头、空气调压过滤器.

Through the in-depth study of the differential geometrical relationship between the 2D graph and 3D graph, the shape of the 3D workspace surface was obtained by enveloping the boundary curve of every layer along the z-axis direction.

通过深入地研究二维、三维图形的微分几何关系，在沿z方向得到每一层的边界曲线基础上，采用曲线包络的方法得到了三维工作空间曲面的形状。

Formulae for the first-order chromatic and third-order geometrical aberration coefficients of superimposed magnetic focus and deflection field of both electric and magnetic type in the case of a point source on the Z-axis are obtained.

并给出了磁聚焦和静电的偏转场相复合情况下竖轴的3级几何像差系数和1级色差系数公式。

By using the seed crystals of designed profiles so that inward as well as outward growth may take place with respect to the z axis, various growth forms of synthetic quartz are displayed.

采用在造型上经特殊设计的籽晶，使对于z轴而言，籽晶的内向同外向生长皆可进行，从而充分地展示了人工水晶的多种生长形态。

Drag to add a Z-axis label to your bar chart.

拖动可将z轴标签添加到您的条形图中。

A new structural development of Z axis for a nano-CMM is described in this paper.

介绍了一种新型 纳米 三坐标测量机Z轴的结构设计.

each of the stackers 3 has a plurality of microplate accommodating portions arranged in the direction of z-axis.

各叠式储存器（3）上沿Z轴方向配列多个微量反应板收容部；

Z axis 10 section auto-refining processing function.

轴10段自动修细加工功能.

Equipped with good lubrication and leading screw pre-stretching, the processing accuracy of Z-axis is guaranteed.

轴放置在主导轨之间最佳位置，运动平稳，配合良好润滑和丝杆预拉伸，确保Z轴的加工精度。

Well, I guess even then, you could center it on the z axis.

我猜即便那时，你也会把中轴定为z轴。

To set up the evaluation base and method of medical rigid endoscope distortion, by using optical axis symmetrical spherical Z view field as the model to simulate concave characteristics of body cavity, the analysis base of endoscope object-image conjugation is established.

建立医用硬性内窥镜畸变的评定基础和方法，用视轴对称的球面Z视场为模型来模拟体腔凹面特征，以建立内窥镜物像共轭的分析基础；

Using the simultaneously multi-axis movement function of control system, constantly tangential NC turning technology for the purpose of eliminating the direct effect caused by form error of tool nose can be realized via three simultaneous controllable axes, including x-axis, z-axis and the tool carrier.

利用控制系统的多轴联动控制功能，使该刀架与数控车床X、Z轴实现三轴联动，则可实现曲面恒切向车削，以消除刀具刀尖形状误差对曲面加工精度的影响。

Remedy: Check mechanics of the Z axis. Check by Service personnel; possibly exchange of head.

方法: 检查Z轴的机械部分, 通过服务人员的检查, 可能更换旋转头.

The + Z axis should be the " up " axis .

轴正方向作为 上方.

The image resolution in Z-axis and time axis is improved.

它提高了图像Z轴分辨力和时间分辨力。

Using astigmatic method to extract information of light source in z axis.

用散光的方法来提取光源在Z轴上的位置。

Adaptive slicing is realized by the calculation of the position of tangent plane of modeling surface, the angle of between the normal section line and the slicing plane, the curvature of normal section line in z-axis direction and radius of curvature.

计算出造型曲面的切平面位置、法线与分层平面的夹角、Z向法截线的曲率和曲率半径，实现优化分层。

In the measurement process the AFM feedback controller make the scanner move the sample along z-axis and keep the vdW force between the tip and sample surface constant.

在测量过程中，AFM反馈控制器控制扫描器沿z轴移动样本，保持针尖-样本表面间的vdW力恒定。

The slope sensor is mounted on a linear X-carriage and the wafer on a spindle with its rotational axis along the Z-axis.

斜率传感器装在X向滑板上，而晶片固定在可绕Z轴转动的主轴上。

The previous three-dimensional geological maps are the expansion of the two-dimensional digital geological map in Z-axis on the use of digital terrain model ( DEM), And then with Digital Orthophoto ( DOM) overlay, which formed the so-called "2.5D" model.

以往的立体地质图多是利用数字地形模型（DEM）对二维数字地质图进行了Z轴方向的拓展，然后再与数字正射影像（DOM）进行套合，形成了所谓的2.5维模型。

In figures of the quadratic functions, the method of space alternate coordinate has been used. A special point has been selected as the origin and a representative vector has been selected as the Z axis of new coordinate system.

对于属于二次函数的图形，本仿真程序采用空间坐标变换的方法，选择特殊点作为新坐标系的原点，将有代表性的矢量作为新坐标系的Z轴。