after heat

After heat treatment, UTS and YTS of RS bars did not change obviously, the E% improved 5.6 times.

热处理后，快速凝固挤压棒材的抗拉强度和屈服强度均没有明显变化，伸长率却提高了5.6倍。

After heat treatment, the microstructure of the steel is tempered sorbite.

经热处理后的试样组织均为回火索氏体。

After heat treatment, the tensile strength and yield strength of the alloy are raised 84.5% and 79.3%, respectively.

热处理后，合金的抗拉强度和屈服强度分别提高84.5%和79.3%。

This kind of material is compounded using soft fibers and suitable resin matrix and formed plate or sheet after heat compression.

这类复合材料主要利用柔软的纤维和适量树脂基体进行复合，经压制形成板材或片材使用。

Mechanical Property of TiN Coating Prepared by Reactive Plasma Spraying after Heat Treatment

反应等离子喷涂TiN涂层热处理后力学性能研究

A series of change in the film occurs after heat treatment.

经热处理后，其组织发生一系列变化。

AIM: To observe the changes of vital indexes and the characteristics of brain histopathological changes in dogs after heat exhaustion death exposed to the environment of high temperature and humidity.

目的：观察犬暴露在高温高湿环境下，其生命指标变化及其热衰竭死亡后脑组织病理学改变特点。

The results of heat shrinkage rate of multi-filaments only express the maximum heat shrinkage rate of unbroken filament. The tensile curve of multi-filaments after heat shrinkage had some relationship with the distribution of heat shrinkage rate of single fiber.

结果表明，复丝热收缩率的测试数据只大体反映未被拉断的单纤维中的热收缩率最大值，复丝热收缩后的拉伸曲线与单纤维热收缩率分布有一定程度的相关性。

Hardness Decreasing Reason of Airscrew Bush Parts of Helicopter after Heat Treatment

直升机旋翼桨根衬套热处理后硬度降低的原因

Analysis of Cause for Steel Wire Brittle Fracture after Heat treatment

钢丝热处理后断丝的原因分析

After five days in the heat of Bangkok, we were ready for the beach.

在曼谷的炎热天气中呆了5天之后，我们想要去海边。

Seat and back wood: Multi-layer plywood after heat treatment, with painting finished.

座、背外壳: 采用优质多层旋切木皮经模具热压成型,面压实木皮, 油漆工艺装饰.

It is proper for middle treatment to adopt high temperature tempering after oil quenching and three-time high temperature tempering is adopted as final heat treatment.

中间处理采用750℃×5h高温回火为宜，最终热处理采用油淬后三次高温回火。

After heat treated, its breaking elongation increases whilst its breaking intensity and elastic recover rate decreases.

经过热处理的PTT长丝的断裂伸长率增大，但断裂强度和弹性回复性都降低。

Objective To study the truth of first aid in spot after heat burning.

目的:了解儿童热力烧伤后现场急救措施的真实情况.

The paper detailedly discusses light fractions are separated from C _ 5 raw mateTia 1 after heat polymerizing.

论述了C_ 5原料油经热聚、分离出来的轻组分经催化聚合工艺制得浅色C_5石油树脂.

In the present study, thermal limit, induced thermotolerance and heat shock protein 70 ( Hsp70) levels after heat shock were determined to elucidate the difference in thermal adaptation between red and green variants.

本实验通过测定红参和青参的热上限、诱导耐热性和热休克之后Hsp70水平来阐明它们之间热耐受的差异。

Although the porous silica antireflective ( AR) coating has high laser damage threshold after heat treatment, its transmission is correlated with environment relative humidity due to many Si-OH hydrophilic groups on the coating surface.

多孔SiO2膜层经热处理后，具有很高的激光破坏阈值，但是结构中有许多Si-OH亲水基团，导致光学透过率受环境相对湿度的影响很大。

The water absorption, hygroscopicity and thickness swelling of wood would reduce after heat treatment.

杉木板材经过高温炭化热处理后，吸湿、吸水性以及厚度膨胀率会大幅度降低。

Gene Expression Changes after Heat Shock by cDNA Array Analysis

热休克诱导基因表达谱的变化

After heat treatment at different temperatures, infrared emittance in 8~ 14 μ m waveband of the nanometer ZnO samples is measured by IR 1 infrared radiometer to search for their application prospect as infrared camouflage materials.

利用IR-1红外发射率测量仪测量了纳米ZnO粉体及其经不同温度热处理后样品在8～14μm波段的平均发射率，初步探索了纳米材料作为隐身材料的应用前景。

It was pleasantly cool in the house after the sticky heat outside.

与户外的湿热相比，屋里真是凉爽惬意。

The surface hydrophobicity of SPI was improve after heat treated by different means.

经不同方式热处理后，SPI的疏水性都显著提高。

Objective: To determine the activity of avidin in hens egg white power after heat treatment.

目的：了解经过一定温度处理的蛋清粉中抗生物素蛋白的活性。

The compounds with different types of cobalt salts had better heat resistance after heat air a ging;

经热空气老化后不同品种钴盐均保持较好的耐热性能；

After heat treatment at 500 ℃, the phase composition of coating is almost HA in which theCa/ P ratio is 1. 61;

空气中500℃热处理后，涂层基本转化为羟基磷灰石，其Ca/P比约为1.61；

In order to ensure the high speed running of the high_speed terylen spinning up_coiler spindle, during the manufacturing, the precision aligning of the center hole of the spindle must be considered after heat treatment.

为了保证涤纶高速纺丝卷绕机主轴的高速运转性能，制造过程中必须考虑主轴心部通孔在热处理调质后的精密校直问题。

Structures and properties of electrodeposited tin nickel alloy after heat treatment

电镀Ni-Sn合金热处理前后的组织和性能

The temperature of phase transition in thin film after heat cycle is changed.

薄膜经热循环后,其相变温度也发生变化.

Immobilized water turned into bound water after heat treatment, indicating that the mobility of water become lower.

热处理后虾仁不易流动水向结合水转化，水分流动性减弱。