anodizing

Its comprehensive coverage focuses on anodizing for surface protection and decorative effects.

它的广泛报导集中在表面保护和装饰作用的阳极电度。

A Study on Factors Affecting Structure Characteristics of Porous Aluminium Anodizing Film

影响多孔阳极氧化铝膜结构特性因素的研究

The sensitivity and selectivity of the GA/ WGE depend mainly on the anodizing potential and time of the electrode pretreatment, the accumulation potential and the pH of the determination media.

该电极的灵敏度和选择性主要取决于阳极极化电位与极化时间、富集电位和溶液的pH。

Anodizing Protection for SiC_P/ 2024Al Composite Material

SiC P/2024Al复合材料的阳极氧化研究

With increasing concentration of NaOH in the solution of the anodizing, the time and voltage of spark formation decrease and particle, porosity, thickness of anodic oxide film become smaller.

阳极氧化过程中，随着NaOH浓度的升高，出现电火花的时间缩短，出现电火花的电压值降低，阳极化膜表面的颗粒变小、孔隙率减小，膜层厚度减小；

Multiple choice for surface treatment: silvery white anodizing, coating, powder coating, PVDF coating, wooden texture coating.

铝材的表面处理的选择有多样: 银白氧化 、 电泳 、 粉末喷涂 、 氟碳喷涂 、 木纹喷涂.

The capacitance change of LC 4 after anodizing in CH 3 COOH solutions could be divided three stages.

阳极化铝合金LC4在醋酸溶液中的电容变化可分为三个阶段,缓慢增长期,快速增长期和大幅振荡期.

Thyristor power supply with ripple percentage equal to or less than 4.18% is suggested to meet anodizing and electroplating processes requirements.

认为晶闸管整流桥电镀电源需具有等于或小于4.18%的纹波因数值才能满足一些氧化和电镀工艺的要求。

Distributed control system for anodizing power supply controlled by microcomputer

采用微机分布式控制的阳极化电源系统的研究

Improvement of sulfuric acid anodizing process for aluminum and aluminum alloy

铝及铝合金硫酸阳极化工艺的改进

Design of High Power Pulsation Supply on Anodizing of Aluminum

大功率铝氧化脉冲电源设计

Research on Welding Technology for Anodizing Shaped Aluminium Alloy Material

表面阳极化铝型材焊接工艺研究

Porous anodizing film can be formed on aluminium surface in acidic electrolyte solution by electrochemical method.

酸性电解液中采用电化学方法可在铝表面形成多孔阳极氧化铝膜.

The treatment of aluminium anodizing waste water is discussed.

讨论了铝合金表面阳极氧化生产线工艺废水的产生和处理问题。

The factory specializes in hard anodizing aluminum and aluminum products anodizing general of the manufacturers.

本厂专业从事铝硬质阳极氧化和铝制品普通阳极氧化的厂家.

Investigation of the Effect of Zinc Element in the Aluminium Alloys on Its Anodizing and Electrolytic Colouring

铝合金中Zn元素对阳极氧化电解着色的影响研究

Finally, anodizing creates a hard, clear outer layer that helps protect against dings and scratches.

最后的阳极氧化工艺，会形成一个坚硬而清透的保护层，来防止磕碰和刮擦。

The process of wide temperature swift aluminium anodizing and it's mechanism of additive agent are studied.

研究了宽温快速阳极氧化工艺,对宽温快速阳极氧化添加剂的作用机理作了分析.

The company has mold design and manufacturing, casting, extrusion, anodizing, electrophoretic coating, powder coating, wood grain transfer printing, thermal bridge and other full production capacity.

公司具有模具设计制造、熔铸、挤压、阳极氧化、电泳涂漆、粉末喷涂、木纹转印、隔热断桥等全套生产能力。

The anodizing of ZL 102 aluminum alloy castings was investigated in the mixed acid and acid solution.

研究了ZL102铝合金在硼酸酒石酸二元混酸体系中的阳极氧化.

PS photoptic liquid coating before aluminum sheet prior processing, including electrolysis -, anodizing and sealing 3 steps.

PS版在涂布感平液后,给不差铝板举行后办理, 包含电解砂纲 、 阳极氧化和不开孔3个步调.

Research progress of anodizing and electrolytic coloring technology for aluminum and its alloy was briefly summarized.

综述了铝及其合金阳极氧化、电解着色的研究进展.

The process of anodizing lnvolves the deposition of further oxide on the surface.

阳极电镀的工序就是在表面进一步附着氧化层.

This paper studies the effects of the sulfuric acid anodizing and chromic acid anodizing on the fatigue strength in the intermediate value life zone of LY12CZ plate and LC9CS bar.

研究了硫酸阳极氧化和铬酸阳极氧化工艺对LY12CZ板材、LC9CS棒材在中值寿命区疲劳强度的影响。

Anodizing process is an effective method to improve the surface properties of magnesium alloys.

阳极氧化是镁合金表面改性的有效方法.

The function of K_2SiO_3 in anodic oxidation is to change the composition of anodizing film and form by XRD.

经X射线衍射（XRD）分析发现，K2SiO3在阳极氧化中的作用主要是改变阳极氧化膜的成份；

The Technology is also applies to the anodizing of common pure aluminium.

该法也适用于一般纯铝的阳极氧化.

Standard of Changing Rinsing Water for Anodizing

铝型材阳极氧化清洗水换水标准探讨

All aluminum has an oxide of some varying thickness. Anodizing is a very heavy controlled oxide.

所有铝都有一层厚度不均的氧化物, 电镀阳极是一很大的受控氧化物.

PLC Network Control System for Aluminium Alloy Shape Anodizing and Coloring Based on DH+ Network

铝型材氧化着色基于DH+的PLC网络控制