bearing support

Through theoretical analysis and experimental measurements, the distribution of local bearing stress in brick masonry under beam support and the position of its resultant have been determined and the load eccentricity can also be determined therefrom.

通过理论分析和试验实测得出梁端局任应力分布及其合力作用点的位置，由此可以确定由梁端传给墙体荷载的偏心距。

When steel pipe is vertically jacking from underground, its counteraction requires more on the strengthening of bearing support.

在地下向上进行竖向钢管顶升，其顶升反力对支座加强提出了较高的要求，出土、止水也是难题。

Stability and nonlinear response of rotor system with elliptical sliding bearing support

椭圆轴承&转子系统非线性运动及稳定性分析

Fabrication and Application of Diamond Film-coated Bearing Support Implement

CVD金刚石薄膜涂层轴承支撑器的制备和应用

Manual arc welding repairing of iron bearing support

手工电弧焊对铸铁轴承座的修复工艺

Executive Force Research on Nitriding Layer Flaking-Off of the Turbine Bearing Support

涡轮承力支柱氮化层剥落的试验研究

How to use a simulant eccentric bush to resolve an eccentric bore of bearing support

如何使用模拟偏心轴瓦解决瓦座孔偏心问题

Presented in this paper is a mathematical model for optimal construction design of the thrust bearing support in a large hydraulic turbine.

本文通过对大型水轮机推力轴承支架结构特点的分析，提出了大型水轮机推力轴承支架结构优化设计的数学模型。

By the same principle, we succeeded in optimizing the foundry technology of bearing support.

用同样的原理和方法对系列轴承座的铸造工艺进行了优化并在实际中获得了成功。

Repair of Bearing Support of Motor Vehicle Rear Axle Main Driving Gear of Mitsubishi Company Japan Truck

三菱汽车后桥导向轴承座孔的修理

Backed up type roller leveller pto bearing support

带支承棍的辊式矫直机动力输出轴支持轴承

Analysis of Normal Mode for Bearing Support of Dynamic Balance Machine by Using FEM

使用有限元方法实现动平衡机轴承摆架的模态分析

A bearing support implement is of critical importance in the precision processing of bearings.

轴承支撑器是轴承精密加工中的关键部件。

Design Development and Test of Hinge Axle Sliding Plate Steel Bearing Support

铰轴滑板钢支座的设计研制和试验

The introduces the new method for strength checking of vertical vessel bearing support based on theoretical analysis of local stress.

根据局部应力的理论分析，提出直立容器支承式支座处强度校核的新方法。

Optimal Construction Design of Thrust Bearing Support in Large Hydraulic Turbines

大型水轮机推力轴承支架结构优化设计

The formation of pits on the working roll bearing support can be avoided.

避免工作辊轴承座形成凹坑。

The longer bronze rod bushing provides a maximum load bearing support.

时间越长青铜连杆衬套提供最大承重的支持。

The roof support structure had collapsed and the entire weight was bearing down on the ceiling.

屋顶的支架倒塌了，全部重量都压到了天花板上。

Based on the dynamic simulation of the spindle system of 5-axis machining center, dynamic optimization design is done for the bearing support system and the structure of the spindle.

对五轴联动加工中心主轴系统进行动力学仿真分析，对原主轴系统的轴承支承系统和主轴结构进行了动态优化设计，提出了双排轴承的设计方案。

An approach to application of large-size ball bearing support in balling disc

圆盘造球机采用大型轴承支托的探讨

Spindle bearing support for balancing universal joint shafts.

万向连结器的动平衡校正所附属有主轴的架台仕样.

Fracture analysis of the tower machine bearing support

塔机支承座的断裂分析

FRACTURE ANALYSIS OF THE TOWER MACHINE BEARING SUPPORT Visual calculating method of tower crane boom

塔机支承座的断裂分析塔式起重机吊臂结构的可视化计算方法

In the old tabll of anti-ablation , the san huan bearing support has become the first choice.

而在嫩机型的改型处事洋, 此栽不一环轴承撑持还来成为首选.

By means of chemical composition analysis, metallogical examination and heat-treatment technology testing, the bearing support was analyzed.

用化学分析、金相检验和热处理工艺试验等方法，对断裂支承座进行了分析。

Compared with the cemented carbide bearing support implement, the diamond-coated bearing support implement using CVD technique has much better durability and performance.

与传统硬质合金轴承支撑器相比，CVD金刚石涂层轴承支撑器的耐用度和使用性能显著提高。

But till now, unless by impact testing, no other good method is presented to measure bearing support system dynamics.

但迄今为止，除了冲击试验外，还没有找到轴承座动力特性实测的好方法。

The hull deformation will change relative position of bearing chock, thereby change the support state of bearing.

船体变形会引起轴承座相对位置的变化，进而引起轴系轴承支撑状态发生改变。

The structural design of the working surface bearing support of a new strip cold rolling machine is intro-duced.

介绍一种新型冷轧板带轧机工作辊轴承座的结构设计，此设计可得到较大的传动轴直径。