bending test

Then do the three point bending test to the fabrics, and the result shows that the changed honeycomb fabric has a higher bearing capacity.

对变化蜂巢织物和纬三重织物进行三点试验弯曲测试，测试结果表明变化蜂巢织物具有更高的抗弯性能。

Biomechanical properties of the healing tibia were analyzed by a three point bending test. The contents of calcium, phosphorus, magnesium, copper, zinc and iron in the tibias were determined.

三点弯曲力学实验测定胫骨的生物力学参数：最后，测定其中钙、磷、镁、铜、锌和铁的含量。

The experimental results of tensile, fatigue and three point bending test show that the tensile strength, plasticity and fatigue life are improved simultaneously.

而拉伸、疲劳和三点弯曲实验结果表明，随焊冲击碾压之后接头的抗拉强度、塑性及疲劳寿命等力学性能也都得到不同程度的提高。

Obtained nanocomposite electrodeposition coatings rate is one times than electroless plating, look at micromorphology that the surface of nano-composite coating grow well, dense, uniform thickness, through the bending test and thermal shock test proved nano-magnesium alloy matrix composite coating have a good combination.

得到的电沉积纳米复合镀层的镀速比化学镀的镀速提高一倍，并且纳米复合镀层表面平整、致密、厚度均匀，通过弯曲、热震试验证明镁合金纳米复合镀层与基体结合良好。

The bond strength of the samples was measured by three point bending test.

采用三点弯曲法测试金瓷结合力，扫描电镜观察钛瓷界面。

The results of three point bending test showed that the biomechanical strength of the new generation bone in 0.8 mm/ day group was higher than the other two experimental groups.

结果：0.8mm/d牵张组新骨骨密度值显著高于其余各牵张组，0.8mm/d牵张组新生骨三点弯曲实验指标均大于另2牵张组。

When three point bending test was made under the 300N compressive force, the maximum tensile strain was at the medial point of middle femur, average 1.18E~ 03 ( mm/ mm).

三点弯曲在300N压力时，股骨中间1/2端，内侧点为最大张应变，平均值为1.18E-03（mm/mm）。

Firstly, the bending load-deflection relationship and failure modes of the test specimen were obtained by the four-point bending test.

首先进行静态四点弯曲实验，得到实验试件在静态弯曲载荷作用下弯曲载荷与加载点挠度的关系以及试件在静载作用下的破坏模式。

The validity of the tibia segment model was evaluated against three point bending test in terms of tibia stress.

胫骨模型由胫骨三点弯曲应力分析实验验证。

The slip between the threaded rod and concrete is little in the three-point bending test, indicating that the selected threaded rod and the torque applied to the nut before loading are acceptable in practical applications.

在加载过程中，螺杆与混凝土之间的相对滑移量很小，因此在拉拔试验中选择的螺杆以及施加于螺母的扭矩在实际工程中是适用的。

The analysis of a four-point bending test of box girder specimens shows favourable agreement with experimental data.

对箱形桁材的四点弯曲试验的分析表明与试验数据吻合良好。

Mechanical properties were valued by high-temperature compress test, three point bending test and Vicker hardness test.

通过高温压缩试验、三点弯曲试验、显微维氏硬度试验等评价合金的机械性能。

And three point bending test was made on 10 screws with hollow lateral holes and 10 massive screws, respectively.

10个空心侧孔螺钉和10个实心螺钉分别做三点弯屈（3pBend）试验。

It is investigated that the influence of Bauschinger Effect on yield strength of tube body by using four point bending test to simulate the tube making process at varying stress strain amplitudes.

采用X65钢板在四点弯曲加载条件下，模拟输油管制管过程中不同应变量下的应力&应变过程，研究包申格效应对输油管管体屈服强度的影响。

Using alcohol hydrogen test, three point bending test, microstructure observation and fracture analysis, the effect of Ti content on diffusion hydrogen H d escape characteristic, microstructure and fracture morphology of electrode deposit metal were investigated.

利用酒精法测氢技术、三点弯曲法试验，并结合显微分析和断口分析方法探讨了钛含量对熔敷金属扩散氢逸出特性、焊缝组织以及断口形貌的影响。

An effective three-point bending test based on compound beam theory is introduced.

介绍了利用复合梁理论测量高速电弧喷涂层弹性模量的方法.

Bending test results show that weld metal has excellent plasticity.

弯曲试验表明焊缝具有良好的塑性。

Compared with the numerical results, it can be seen that the strength size effect is remarkable under three point bending test and is not apparent under compression test with lateral pressure.

试验也表明，三点弯曲试验强度尺寸效应最为明显，单轴拉压试验次之，有侧压的压缩试验最不明显。

Biomechanical characteristics of femur were measured by three point bending test.

三点弯曲试验法测定骨生物力学；

A method to solve tension softening relationship of concrete obtained a three-point bending test is presented.

确立了分别基于开裂强度准则和断裂韧性准则的由三点弯曲实验确定混凝土材料抗拉软化关系的方法.

According to the standard's requirements, test piece for qualification of welding procedure and for product welding should be carried out various bending test.

焊接工艺评定试板和产品焊接试板，按标准要求都要进行弯曲试验。

A special machine with scanning electron microscope ( SEM) used was designed for three point bending test.

设计了一种可用扫描电镜（SEM）动态观察、专门用于三点弯曲试验的特殊装置。

Lateral bending test of the specimens was performed to examine the physiological overload using an Instron 5 500 universal material testing machine at the constant speed of 10 mm/ minute until fracture or dislocation was induced.

以侧弯方式进行超生理负荷试验，损伤试验在Instron5500型万能材料试验机上以10mm/min的速度匀速度加载，直至标本发生骨折或脱位而屈服。

A new X-ray diffraction topographic method was developed and used to study the fracture morphology and process in three point bending test of Mo single crystals.

本文提出一种新的X射线形貌法，并利用它观察三点弯曲Mo单晶的断口特征及其断裂过程。

The biomechanical properties of the healing radius were analyzed by a three point bending test.

桡骨的生物力学性能由三点弯曲实验所得的结果进行分析；

A special machine with scanning electron microscope ( SEM ) used was designed for three point bending test.

设计了一种可用扫描电镜 ( SEM ) 动态观察、专门用于三点弯曲试验的特殊装置.

In this paper, the stress induced resistance changes in iodine doped and undoped carbon nanotube films were investigated by a three point bending test.

利用三点弯曲法研究了掺杂和末掺杂碳纳米管薄膜应力诱导电阻的变化。

The process of three-point bending test and data processing are involved.

介绍了岩石三点弯曲蠕变试验过程及数据处理方法。

The impact fatigue property of cemented carbide was studied by impact bending test in this paper.

采用冲击弯曲试验研究了硬质合金的冲击疲劳性能.

Beam bending test of RPM pipe and control of beam bending strain in construction

RPM管梁弯曲试验及其梁弯曲应变的工程控制