calcining

METHODS: The experiment was performed at the Tissue Engineering Scaffold Materials Laboratory, Sichuan University from February to May 2006. CPP with different polymerization degree was prepared by controlling the calcining time.

方法：实验于2006-02/05在四川大学组织工程支架材料研究室完成。通过控制煅烧时间制备得到具有不同聚合度的聚磷酸钙材料。

The carbonate from calcium carbonate, if not remoyed by calcining may cause foaming in the reactors.

碳酸钙中存在的碳酸根, 如果不经煅烧除去,会在反应槽中引起泡沫生成.

Taixi anthracite with high quality calcining is also suitable raw material.

宁夏太西煤只要控制好煅烧质量,也是生产微孔炭砖的优质原料.

The influence of magnesium basic carbonate on MgO activity and particle size under conditions of different calcining time, calcining temperature and surface active agent.

碱式碳酸镁在不同的锻烧时间、锻烧温度、加表面活性剂等各种条件对氧化镁活性及粒度的影响。

The alkaline cementitious properties of calcining clay which contain kaolin e and quartz is studied.

研究了含高岭石和石英的粘土加热脱水后,在碱激发剂的作用下系统的胶凝性质.

The experiment results show that with calcining temperature rise the color of ferric red gradually deepened from mauve to chrysoidine, morphology of ferric red also changed.

实验结果表明：随着煅烧温度的升高，铁红颜色逐步加深，由橘红变为紫红，铁红的形貌也发生了变化。

Preparation and Application of Calcining Seed in the Production Process of Rutile Titanium Pigment

金红石型钛白粉生产过程中煅烧晶种的制备与应用

Dead-Burned Magnesite is produced with selected natural magnesite through purifying calcining in shaft kiln.

重烧镁砂是选用天然菱镁石矿,经高温竖窑煅烧而成的.

Air consumption of the pre-calcining kiln system under normal running conditions

预分解窑系统在稳定运行条件下的用风

Distributing control system with STD industry control computer for shaft cement calcining kiln

水泥立窑煅烧STD工业控制计算机分布式控制系统

In this paper the industrial conditions of calcining hydrate using recycle fluid bed calciner were introduced.

大工业生产中循环流化床焙烧炉用于焙烧氢氧化铝的运行状况.

Red Lead Red lead is made by calcining litharge in a muffle furnace.

红铅是由正方铅矿在马福炉中煅烧得到的.

Optimum calcining technology parameter from phosphogypsum to plaster of paris is determined.

确定了磷石膏的最佳炒制工艺参数.

High performance channeltron electron multipliers have been made by chemical coating and calcining.

采用化学涂层和焙烧的方法制成了高性能通道式电子倍增器（CEM）。

On the analysis of calcining mechanism, this paper discusses the significance of the temperature of calcining zone.

在分析煅烧机理的基础上，探讨了回转窑煅烧带温度对锻后焦质量的影响，以及影响煅烧带温度的主要因素。

Controlling the temperature in the calcining furnace automatically

焙烧炉温度自动控制

Pure β-Ca 2P 2O 7 phase, pure β-tricalcium phosphate phase and hydroxyapatite containing a small amount of CaO were obtained by calcining the dried gel-like powders with the corresponding Ca/ P ratios at 1000 ℃.

将混合溶液蒸发溶剂后得到的干胶状粉末在1000℃煅烧，对应不同的Ca／P比，可分别获得纯β－Ca2P2O7和β－磷酸三钙以及含有极小量CaO的羟基磷灰石。

This invention discloses a method for calcining limestone by using the discharge gas from ammonia synthesis.

一种以合成氨弛放气为燃料煅烧石灰石的方法.

Design of the new type of DC eiectric calcining furnace

新型直流电煅烧炉的设计

Design and application of optimization control system in petroleum coke calcining rotary kiln

石油焦煅烧回转窑控制系统优化设计与应用

The results showed that the PbTiO_3 nanocrystal structure is uniform tetragonal phase perovskite structure when heat-treatment is above 600 ℃, and the grain size is increased by increase of calcining temperature.

分析表明：焙烧温度高于600℃时可形成单一四方相钙钛矿结构的PbTiO3纳米粉体，并且随热处理温度的升高，晶粒度增加。

Study of Calcining Entire? Cast Furnace Lid Made with Mullite? Fly Ash

莫来石&粉煤灰整体浇注焙烧炉盖的研究应用

Discussion on Rotary Velocity for Coke Calcining Kiln

炭素煅烧回转窑转速的探讨

In this paper, TP-STD industry control computer is used to construct a two stage distributing control system to realize the intelligent coordination control of shaft cement calcining kiln.

本文提出用TP&STD工业控制计算机构成二级分布式控制系统，实现水泥立窑煅烧的智能协调控制。

Influences of Eu3+ ion concentration and calcining temperature on the luminescence property of Al2O3: Eu phosphor was analyzed with a fluorescence spectrometer.

通过荧光分光光度计分析了Eu掺杂浓度和煅烧温度对Al2O3：Eu粉体发光性能的影响。

Microcomputer Control System of a Pottery Tunnel Calcining Kiln

陶瓷隧道窑炉微机控制系统

Effect of Calcining Process on α-alumina Crystal Size

锻烧工艺对α-Al2O3晶粒的影响

The optimum process conditions in surface modification were obtained: the HA calcining temperature: 1000 ℃, the addition of PL coupling agent: 0.7wt%.

其较佳的表面改性工艺条件：HA煅烧温度：1000℃；偶联剂加量：0.7wt%。

The problem of lower 28d compressive strength of clinker using cleaving stone proportioning has been resolved through cleaving stone-sandstone proportioning, and the problem of stoppage in the kiln inlet system resulting from cleaving stone proportioning can be moderated by improving calcining process.

用页岩－砂岩配料，可改变页岩单独配料熟料28d抗压强度低的问题。对燃烧工艺方面的改进，可使页岩配料引起的窑尾系统结堵问题得到缓解。

Testing and analyses on thermal physical parameters of green petroleum in coke calcining kiln

炭素回转窑内煅烧石油焦热物性参数的测试与研究