clamping force

In view of the service life of the current rod breaker affected by the clamping force, the design way of the jaw and the study method of reasonable clamping are studied.

针对现有接卸钻杆装置钻杆的夹持力过大，降低钻杆使用寿命问题，根据材料的接触强度理论与变形理论，对钻杆合理夹持力进行了研究，并提出了夹杆爪的设计方法。

Using the micro-force sensor of10 μ m width, we successfully measure the clamping forces of different jaw and compare the measured values with the simulation values.

本文利用10μm线宽的微力传感器成功测量出了微夹钳不同钳口距离下的夹持力，并且将测量值与仿真值进行了比较。

The Hoo mixed sensitivity controller for pneumatic manipulator clamping force control system was designed and solved.

针对气动机械手夹持力控制系统设计求解了H∞混合灵敏度控制器。

Why to correct the mould clamping force?

为什么要校正模具锁紧力?

The clamping force is an important factor in the tube cutting.

锯切夹紧力大小对钢管锯切有很大的影响.

Clip book disk acts as a location and clamping force, compactness should be appropriate.

夹书圆盘起到定位及夹紧力作用, 松紧度应适宜.

The El-Exis line ranges in clamping force from 110-780 tons.

厄尔尼诺 - 卓越行锁模力范围从110-780吨.

Too much clamping force : Bad vent ( burns, incomplete ), mold deformation.

锁模力太大: 排气不畅 ( 焦斑, 充模不足 ), 模具变型.

A high-rigidity, strong clamping force and high cost performance and other characteristics.

具有高刚性 、 强锁模力、高性能价格比等特点.

Too much clamping force : Bad ent ( burns, incomplete ), mold deformation.

锁模力太大: 排气不畅 ( 焦斑, 充模不足 ), 模具变形.

So, it's possible to repeat an applied torque for any required clamping force.

因此, 有可能重复应用扭矩产生任何所需的夹紧力.

Performance Characteristics and Clamping Force Accuracy of Internal Circulation Two-Plate Injection Molding Machine

全液压内循环二板式注塑机性能特点及锁模精度研究

Based on the theory of slip line and plastic deformation of metal, the clamping force for forging reduction of cylinder is analyzed and studied.

应用滑移线理论和金属的塑性变形理论，分析研究圆柱体镦粗过程中的夹紧力的计算方法，并与试验结果进行比较。

Quality Classification of Clamping Force Control Valve based on Support Vector Machine

基于支持向量机的夹紧力控制阀质量分类

The model of power bond, mathematics, simulation of speed tatio valve and clamping force valve is built, The simulation results indicate that peed tatio valve and clamping force valve can fulfil the hydraulic system of CVT.

建立了CVT液压系统速比控制阀和夹紧力控制阀的功率键合图模型、数学模型和仿真模型，仿真结果表明速比控制阀和夹紧力控制阀的性能满足CVT液压系统的要求。

The fast and powerful clamping force, extending larger clamp area avoid damage casing.

将上下夹之油压夹持力加强加大,且加宽夹颚之面积避免夹扁套管或损坏,可因夹持面积增大且挟持力变大, 可使套管于施工中更稳固,且其寿命更加长.

The distance between the main tong and the back tong is short, and this causes excessive clamping force on the tubing coupling.

国产液压钳主钳和背钳的间隔距离短，背钳夹持接箍时，因夹持力过大造成接箍变形引起粘扣。另外，油管对中性差也易造成错扣而粘扣。

It is guarantee to get high quality casting that inner casting path and air outlet path are reasonably designed, the rotary speed and clamping force of silicon rubber plats are correctly celebrated.

合理设计铸模的内浇道、出气道，正确选择离心浇注旋转速度和硅橡胶盘片的夹紧力，是获得高质量铸件的保证。

The mechanical system consists of moving mechanism, clamping force amplifier, rotating manipulator mechanism.

机械系统由移动机构 、 夹紧力放大器 、 旋转式机械手机构构成.

The clamping process of seed-filling structure has be studied, and obtain the relations of auxiliary clamping force, roughness of working surface and stability of seed-clamping.

研究分析了取种机构的夹持过程，得出了辅助夹持力和夹持机构工作面的粗糙度与夹持稳定性的关系；

It is processing two-crane bar clamping mould . It feathers quick, smooth, strong clamping force and durable.

精加工双曲臂连杆合模,速度快 、 工作平稳 、 锁模力强、经久耐用.