critical load

When circumjacent load makes the lowest natural frequency zero, critical load is obtained.

当周边面力使夹层圆板的最低固有频率为零时，就可获得临界载荷的值。

And its critical load measured by indentation test, is as high as 1000 N.

压痕法测试其临界载荷达1000N。

The method of calculating buckling critical load of open section thin-walled bar as the type of curly cross section strip is given. 3.

给出了弯曲截面钢带这种开口薄壁类型杆件的失稳临界力的计算方法。

Calculation with Energy Variation Method for Critical Load of Side Inclination of Through Tied Arch Bridge

应用能量变分法计算下承式系杆拱侧倾临界荷载

By this method the critical load could be obtained more easily and accurately.

对Southwell的方法加以进一步的分析后，得到了一个既简便又更精确的用实验测压杆临界力的方法。

The critical load and natural frequency of rhombus plates with simply supported at all edges are calculated.

作为算例计算了四边简支菱形板的自振频率和临界载荷。

The critical load of failure is an important index for the comprehensive performance of coating-substrate systems.

评价膜 - 基体系的综合性能的重要指标是其失效的临界载荷.

The friction factor has a little effect on bucking critical load.

摩擦系数的改变对临界失稳载荷的影响不大.

To polygonal arch pipeline across the river, displacement method is applied to solve stability critical load.

本文采用位移法求解折线形过河拱管的稳定临界荷载,从理论上探讨了折线形拱管的稳定性分析.

Application of trying function mode in the calculation of critical load approximation

试函数法在临界载荷近似值计算中的应用

The dependence of the uniaxial critical load for simply supported rectangular multi-ply laminated plates on the state of their laminated layers is analyzed and explained.

本文分析并解释了多叠层简支矩形层合板的单轴压临界载荷随板的铺层状态而变化的现象。

Analysis the development of test equipment of testing buckling column's critical load based on the definition of the compressive column's stability

基于压杆失稳定义的稳定试验装置研制过程

We shall find this definition useful for the determination of the critical load.

采用这个定义,对确定临界荷载是有用处的.

Firstly, shallow spherical shells under transverse uniform loading was analyzed in nonlinear large deflection method based on the large deflection of shallow spherical shell deformation equations, then the cusp catastrophe model and the critical load expression was established.

首先，基于扁球壳大挠度变形方程对横向均布载荷作用下的扁球壳跳跃屈曲进行了非线性大挠度分析，建立了尖点突变模型，得出了临界载荷表达式。

The simplified calculating method for estimating structural dynamic critical load has also been suggested.

提出估算结构动力稳定临界力的简化计算公式.

Critical load and length of variable cross section rods under fire conditions

火灾环境下变截面杆的临界荷载和临界长度

In this paper, the solder joints are divided into two groups according to analysis with unit temperature load. Non-critical solder joint was condensed by performing static substructure method.

在本文中，首先根据单位温度加载的分析结果将焊球分为关键焊球与非关键焊球两组，对非关键焊球使用静态子结构法进行静凝聚，然后再进行温度循环分析。

The facility will be built in two identical phases, each comprising 18.2 megawatts of critical load.

该设施的建设将分为两个完全一样的阶段，每期包括18.2百万瓦特临界负载。

Another Uniform Inference for Euler Formula about Critical Load of Slender Compressive Rod

细长压杆临界压力欧拉公式的另一种统一推导

The critical load of elastic buckling for shear wall composed of thin steel plate and reinforced concrete frame

钢筋混凝土薄钢板组合剪力墙的弹性屈曲临界荷载

This becomes critical when you're testing load and security.

这在测试负载和安全性时会变得非常关键。

The Critical Load in Measuring the Coating Layer Hardness

材料改性表层硬度测试时临界负荷的确定

With the joint effect of wind and wave, the superposition of maximum wave loads and random wind loads can be generally considered as the critical load case of load effect combination.

在风、浪联合作用下，最大浪荷载叠加随机风荷载时程工况一般可作为荷载效应组合的控制工况。

However, the intrinsic brittleness of ceramics has limited their use in critical load bearing structural components.

然而, 陶瓷固有的脆性限制了其作为高载荷部件方面的应用.

The buckling critical load is calculated with finite difference method.

用差分法求解这个方程,得到了连续油管的临界失稳载荷.

Bucking critical load analysis of Y Style vibro-pile based on cusp catastrophe theory

基于尖点突变理论的Y型桩屈曲临界荷载分析

Calculate Approximately Critical Load of Tenuous Long Compressive Bar by Chart Multiplication Method

细长压杆临界载荷的图乘法近似求解

The paper briefly summarizes the dynamic models for critical load for acid deposition.

论文概述了国内外现有的几种酸沉降临界负荷动态模型.

Compared with the condition of the two-dimensional stress state, the influence of all the parameters to the results of the formulas of the critical edge load and critical load in the condition of the three-dimensional stress state is analyzed in the end of this paper.

并通过实际的算例详细的分析了临塑荷载、临界荷载中各个参数在二维应力状态下和三维应力状态下对计算结果进行了影响程度分析。

The results show that opening point, opening angle, maximal tangential stress and critical load vary with aspect ratio and inclined angle. The most dangerous inclined angle is obtained accordingly.

结果表明，开裂点、开裂角、最大切向拉应力和临界载荷随椭圆的纵横轴比和倾角的不同而变化，由此可得到最危险的倾角。