dsc

All of this is achieved by a simple modification of conventional DSC.

所有这都因为一次道统的DSC的简单的修改被取得.

Coil coatings was thermal analyzed and researched with DSC in order to test glass transition temperature ( Tg) of the paint film at the maximum precoated metal temperature ( PMT) and determine the optimal curing conditions of different coil coatings.

采用DSC进行卷材涂料热分析研究，测试在不同PMT（最高金属板温）下漆膜的Tg，以确定各种卷材涂料的最佳固化条件。

The thermal denaturation of chicken ovalbumin were investigation by differential scanning calorimetry ( DSC ) .

本文用示差扫描量热法(DSC ) 研究了鸡卵清白蛋白的热变性,以及溶剂对变性的影响.

It also studied cure kinetic characteristics through programmed heating DSC method and Kissinger equation, and obtained some important kinetic parameters, such as the apparent activation energy and order of reaction etc.

采用程序升温DSC法，用Kissinger方程研究了PPO/EP体系的动力学特征，并计算得到了一些重要的动力学参数如表观活化能、反应级数等。

DSC analysis indicated that addition of PAPI weakened the crystallization ability of PLA.

DSC分析发现PAPI的加入削弱了PLA的结晶能力。

Ageing of the asphalt coating was analysed with IR, DSC and TG.

结合红外(IR) 、 差热分析(DSC)、热失重(TG) 测试手段分析石油沥青涂层的老化程度.

Thermal stability of hybrid material was analyzed by DSC and TG.

示差扫描量热法(DSC)、热重法(TG)测试分析了材料的热稳定性.

The hot-reaction was tested and analyzed between wheat straw, EVA, PE and PVC by DSC.

运用差示扫描量热法(DSC)测定和分析了乙烯-醋酸乙烯(EVA) 、 聚乙烯(PE)、聚氯乙烯(PVC)塑料与麦秸之间的热反应特征.

A study of computer aided DSC for the cure reaction kinetics of tetrafunctional epoxy resin

计算机辅助DSC研究四官能环氧树脂固化反应动力学

The chemical components, structure and morphology of copolymer were confirmed by FT-IR, DSC and TEM. The surface property and mechanical properties of fluoroacrylate copolymer emulsion films were determined by water absorption ratio, contact angle and tensile testing machine.

通过FT-IR、DSC、TEM对乳胶膜组成、结构和形貌进行了表征，通过接触角、吸水率和拉力试验机表征了含氟丙烯酸酯共聚物乳胶膜的表面性能和力学性能。

We have investigated the thermally induced crystalline transformations of Polyvinylidene fluoride and a copolymer of vinylidene fluoride and tetrafluoroethylene using DSC method and infrared spectroscopy.

本文报导利用DSC法及红外光谱法研究聚偏氟乙烯及偏氟乙烯&四氟乙烯共聚物热诱导的晶型转变。

Differential scanning calorimeter ( DSC ) showed NPN had high T _ g ( 129.7℃ ) and T _ m ( 245.7℃ ).

差热扫描法(DSC ) 测定其玻璃化温度 ( Tg ) 高达129.7℃,熔点达 245.7 ℃.

Twenty U-Pb ages from thirteen zircon grains indicated that the ages for LTS gneiss are mainly ranged between 233~ 394Ma and DSC gneiss between 307~ 718Ma.

二个样品13个颗粒的20个有效测定点的年龄表明，鹿吐石片麻岩主要分布在233～394Ma，道士冲片麻岩在307～718Ma之间。

The heating stability of the reagents were also studied by DSC analysis.

用差热分析(DSC)研究试剂的热稳定性.

DSC showed that LCP accelerate the crystallization rate of PET.

DSC分析表明,LCP的 加入对PET的结晶起到了促进的作用,并在一定程度上提高了结晶度.

DSC, thermogravimetry analysis ( TGA ) and circular dichroism ( CD ) were used to study the thermal and optical properties.

利用差示扫描量热法(DSC) 、 热失重分析 ( TGA ) 以及圆二色谱 ( CD ) 研究了嵌段共聚物的热性能和旋光性能.

The OPPLC was conformed by differential scanning calorimetry ( DSC ).

差热分析 ( DSC ) 的结果表明形成了OPPLC这一新的物相.

Meanwhile TG-DSC show furfural to raise the urea-formaldehyde resin resistance foaming.

同时TG -DSC 表明糠醛在一定程度上提高了脲醛树脂的耐热性能.

The melting point and the shear strength of Bi-Pb-Sn-Cd fusible alloys were determined by DSC and tension tester.

利用差热分析仪和拉伸试验机，研究了易熔合金Bi-Pb-Sn-Cd的成分对合金熔点和剪切强度的影响。

The transitions of bisphenol A and phenolphthalein oligo -- polysulfones were inves-tigated by DSC.

本工作用示差扫描量热法(DSC)研究了双酚A型和酚 酞 型两种聚砜预聚物的转变.

Research on DSC of the low temperature storage materials of hydrate of alkaline earth metals

碱土金属水合氯化物低温蓄热材料的DSC研究

The purity tested by DSC is 99.20 % with RSD of 0.05 %.

DSC检测样品纯度为99.20%,RSD为0.05%.

The non-isothermal and isothermal crystallization kinetics of PA 1212 were studied by DSC.

采用DSC方法研究了PA1212的 非 等温和等温结晶动力学.

Differential scanning calorimetry ( DSC ) determination of purity of chlorotoluron.

研究了用差示扫描量热法(DSC ) 测定绿麦隆的纯度.

The effect of aging and cold working rate on the trans formation properties and the recovery strain in Ti-50. 5mol% Ni shape memory alloy have been investigated with DSC ( Differential Scanning Calorimetry) and mechanical test under a constant stress.

用示差扫描热分析仪（DSC）和恒应力拉伸试验研究了时效和冷加工率对Ti-50.5mol%Ni形状记忆合金相变特性和回复应变的影响。

Besides, thermodynamic analysis was made to the curing reaction of glucose-phenol resin adhesive by TGA and DSC, Kissinger equation and Crane equation were used to calculate the dynamic parameters of the curing reaction.

除此以外，我们还通过TGA、DSC对葡萄糖苯酚树脂的固化反应进行了热力学分析，利用Kissinger方程和Crane公式计算了树脂固化反应的动力学参数。

The curing kinetics of the vinyl ester resin used in pultrusion process was studied by non-isothermal DSC test, and the apparent activation energy(Δ E) and the reaction order ( n) of the curing reaction were calculated by using the Kissinger and Crane equation.

采用非等温DSC法研究了适合于拉挤工艺的乙烯基酯树脂体系固化反应动力学，用Kissinger方程和Crane方程求得树脂体系固化反应的表观活化能为68.3kJ/mol，反应级数为0.918。

Nickel phthalate tetrahydrate was synthesized by rheological phase reaction. Its thermal decomposition process in N2 was studied by TG, DTG and DSC, IR, FABMS.

用流变相反应法合成了四水邻苯二甲酸镍，用TG、DTG、DSC、红外光谱、质谱研究了它在氮气气氛中的热分解机理。

The physical dimensions, tensile-strength, area resistance, DSC curves were measured in the experiments. The multiple separators were applied in testing batteries for initial electrical performance tests.

实验中测量了隔膜的物理尺寸、拉伸强度、面积电阻、示差扫描量热法（DSC）曲线，并应用于实验电池中，对电池电性能做了初步测试。

The melting point was measured by differential scanning calorimeter ( DSC ) .

用差示扫描量热仪(DSC ) 测试了树脂的熔点.