electroslag

Effects of the specific conductance. thermal conductivity and viscosity of slags, such as ANF-6 and A1. on the powder consumption in electroslag remelting process were investigated.

以高氟化钙渣ANF-6和无氟化钙渣A1为例，研究了它们比电导、导热系数、粘度对电渣重熔过程电耗的影响。

The detection environment, method and new progress of electroslag casting are introduced.

介绍了电渣熔铸金属液位的检测环境 、 方法和最新成果.

Bond area characteristic of joint strip electrode electroslag surfacing using ultra-low-carbon austenitic stainless steel

超低碳奥氏体不锈钢带极电渣堆焊接头的熔合区特征

The slag pool and the metallic bath are the most important two regions in Electroslag Casting ( ESC ).

渣池和 金属熔 池是 电渣 熔铸过程中两个最重要的区域.

The investigation of the electroslag teeming process for production of hollow ingots

电渣浇注空心锭研究

This paper has mainly presented the microstructure and mechanical properties of electroslag remelting casting ( ESRC) wicket gate of simulating hydraulic turbine for Three Gorges Power Station and its lot production.

主要介绍了电渣熔铸模拟三峡真机导叶各部位组织与性能及真机导叶的批量生产情况。

The smelting results show that the new method quite effective realize Intelligent Control of Electroslag furnace.

应用结果表明该方法能够较好地实现电渣炉的智能控制.

study on the influence of high temperature region at slag bath center to the electrode's melting in the electroslag casting process

电渣熔铸中渣池集中高温区对电极熔化的影响研究

Electrode regulating is a key link in electroslag furnace for energy saving and metallurgical quality improving.

电极调节是电渣重熔炉的重要环节,是节约电能、提高冶金质量的关键.

The products electroslag remelting steel include 243 designations of alloy steel and superalloy.

产品包括优质合金钢与超级合金243个牌号.

The relationship between thermoplasticity and structure of Mn 18 Cr 18 N electroslag remelting ( ESR ) steel as cast was investigated.

研究了 电渣 重熔Mn18Cr18N钢的高温热塑性及其与组织的关系.

study on the high temperature region at slag bath center in the electroslag casting process by simulation and experiment method

电渣熔铸中渣池中心高温区的模拟与实验研究

development and prospect of electroslag remelting technology at home and abroad

国内外电渣重熔技术的发展与展望

Research , Production and Application of New Special Flux HL 801 for Electroslag Pressure Welding of Reinforcement.

HL801钢筋电渣压力焊专用焊剂的研制与试用.

Simulation of Thermoelectricity Field in Slag Pool Heated by Electroslag on Roller Surface Based on ANSYS

基于ANSYS轧辊表面电渣加热渣池热电场模拟研究

ESCC fill a gap of the domestic electroslag metallurgical technology.

电渣连铸技术填补了国内电渣冶金技术领域的一项空白。

A multi-purpose platform for experiments of automatic control system electroslag remelting furnace

一种多用途的自动化系统实验平台

Principles and Applications of Bar Electroslag Butt Welder Moder GDH 36

GDH&36型钢筋电渣压力焊机的工作原理及应用

Research of Control System of Automatic Feeding of Consumable Electrode for Electroslag Casting Machine

电渣熔铸机自耗电极自动进给控制系统的研制

Direct-reading AES analysis of tin ingot the investigation of the electroslag teeming process for production of hollow ingots

锡锭的直读光谱分析电渣浇注空心锭研究

In this work , a feasible process of arc-furnace melting followed by electroslag refining was employed.

采用电弧炉+电渣重熔冶炼工艺,生产成本较低,硫回收稳定.

Melting ratio of electrode and efficient power factor of the current under different electroslag melting-casting conditions were calculated by energy conservation law through coupling simulation of thermo-electric field in slag pool at high temperature.

从高温渣池的热电场耦合模拟入手，利用能量守恒的方法计算了在多种熔铸条件下电极的熔化率及电流的有效功率因数。

From Statistics of hardness, we can conclude that the hardness of vibration electroslag welding have little to do with modes of vibration and vibration parameters.

从硬度统计表观察，振动电渣焊的硬度与振动方式及振动参数无明显相关性。

That is: ( 1) to make the electroslag casting ring; ( 2) high temperature controlled hot deformation followed by controlled cooling ( i.e. high temperature thermomechanical treatment); ( 3) cold deformation strengthening.

它由如下三步组成：（1）电渣熔铸环坯→（2）高温控制热变形和控制冷却（即高温形变热处）→（3）冷变形强化。

Various sampling methods for joint quality test of hot-rolled steel bar are introduced and discussed from flash butt welding, arc welding, electroslag welding and other aspects. According to different joints various sampling and test results evaluation methods are introduced in detail.

介绍了热轧钢筋接头采取的多种方法，从钢筋闪光对接焊接头、钢筋电弧焊接头、电渣压力焊接头等方面进行了阐述，对各种钢筋接头检验取样方法及试验结果评定做了详细的说明。

Mathematical Simulation on Thermoelectricity Field of Slag Pool Heated by Electroslag on Surface of Roll Core and Influencing Factors

辊芯表层电渣加热渣池热电场及影响因素的数学模拟

This article describes three stages in the development of electroslag furnace and its recent development.

系统论述了电渣炉发展的三个阶段,以及电渣炉最新发展.

Discussion on law of chemical composition change of electroslag remelted steels for hi pressure boiler tube making

电渣重熔高压锅炉管用钢化学成分变化规律的探讨

Using the parameter design method the processing parameters of electroslag casting was optimized.

采用正交试验法,优化出自耗电极自动进给系统下的电渣熔铸工艺参数.

The forming mechanism of slag skin was studied during electroslag casting.

研究电渣熔铸过程中渣皮的形成机理.