elevated temperature

The erosion tests at elevated temperature show that coating's erosion behavior is between plasticity and fragility.

高温冲蚀磨损试验表明,各涂层的冲蚀磨损行为介于塑性与脆性冲蚀之间,并以塑性磨损为主.

Assumption uniform sectional temperature and empirical formula elevated temperature in large space fire boundary condition the temperature-time curve of steel member can be derived from the solution of heat equilibrium equation which bases on the lumped differential formulation.

假定钢构件截面温度均匀分布，将高大空间建筑火灾中的实用空气升温曲线作为构件升温边界条件，对集总热容法建立的热平衡方程求解，得出钢构件在火灾下的温度-时间曲线。

Secondly, the influence of solidification shrinkage was considered by increasing thermal expansion coefficients of elevated temperature.

其次, 通过加大材料的线膨胀系数,考虑了凝固收缩对熔池尾部应力应变场的影响,最终得到了各种条件下的焊接应力-应变场.

CNTs are manufactured from ethylene in a reactor at an elevated temperature using a catalytic process.

碳纳米管以乙烯为原材料,在反应堆中经高温催化而成.

Deformation behavior at elevated temperature of AZ 31 B magnesium alloy was studied systematically by processing map theory.

采用加工图理论系统AZ31B镁合金在高温变形过程中的变形行为.

The current status of study and application of elevated temperature cast magnesium alloy is reviewed.

综述了高温铸造镁合金的研究和应用现状.

Elevated Temperature Deformation Behaviour and Mechanical Characteristics of Invar Alloy Used for Shadow Mask

显示器荫罩用因瓦合金的高温变形行为与力学特性

The heat transfer experiments are carried out in elevated temperature SHPB system, to measure the temperature history and temperature distribution of specimen.

通过在高温SHPB实验装置上进行热传导实验，测量得到了试件上不同位置测点的温度-时间历史，初步得到了试件上不同时刻的温度分布；

Furthermore, some advices are provided for calculating the strength parameters of steel bar at elevated temperature.

对钢筋高温强度参数的计算公式提出了一些建议.

SiC particles and dimple are present in the fracture of the tensile specimen of SiC P/ MB 2 composites, there is interfacial debonding between the SiC particles and the matrix in the tensile fracture at the elevated temperature.

复合材料的拉伸试样断口存在SiC颗粒和韧窝，高温拉伸试样断口存在界面脱粘。

Tensile Creep Behavior of a 3D-C/ SiC Composite at Elevated Temperature

3D-C/SiC的高温拉伸蠕变性能

The empirical relation, the Monkman-Grant relationship and the Larson-Miller parameter can be used for creep rupture life prediction for the Three-Dimensional C/ SiC composite, The damage can be accumulated during the tensile creep tests at elevated temperature.

用应力经验公式，Monkman-Grant关系和Larson-Miller参数这三种方法来估算3D-C／SiC复合材料的蠕变持久寿命。

Flow Stress Behaviors of the Elevated Temperature Deformation for 7055 Aluminum Alloy

7055铝合金高温压缩变形的流变应力

Newly developed fire resistant steels improve their elevated-temperature strength, thus reducing fire-resistant coating.

耐火钢提高了钢的高温强度, 从而减少了防火涂层.

In situ recrystallization during elevated temperature deformation in fe_3al based alloy

Fe3Al基合金高温变形过程中原位再结晶现象

For elevated temperature service, which material should he applied to support element or welded attachment.

对于高温工况, 哪种材料可用作管道支撑元件或焊接附件?

The kinetic behaviour of the structural relaxation at temperature and the transformation elevated temperature was discussed.

考查了低温结构弛豫和高温转变的动力学行为.

The elevated temperature strength and creep property of alloys can be improved by the Sr addition.

锶合金化可以改善镁合金的高温力学性能以及蠕变性能.

Fine ceramics ( advanced ceramics, advanced technical ceramics)-test method for flexural strength of monolithic ceramics at elevated temperature

细陶瓷-单块陶瓷高温弯曲强度试验方法

Advances of Research on Bolted Flange Joints at Elevated Temperature

高温螺栓法兰连接研究进展

A new method ( layer-by-layer rebound method ) is presented residual strength of concrete exposed to elevated temperature.

提出了 逐 层回弹法检测火灾后混凝土强度的方法.

Damage and Safety Evaluation of Pipeline under Elevated Temperature Hydrogen Environment

高温临氢管道材料的损伤和安全评估

The excellent mechanical behavior of TiAl intermetallics at elevated temperature makes it a possible new generation structure material serving as aeronautical material.

TiAl基金属间化合物的优良高温力学性能使其可能成为新一代航空航天工程用的轻质高温结构材料。

Tensile Creep of UD-C_f/ SiC Composites Prepared by Precursor Pyrolysis and Hot Pressing at Elevated Temperature

先驱体转化-热压单向C f/SiC复合材料的高温拉伸蠕变

Suspended rheology tensile testing machine ( SRTTM) has been used to investigate the elevated temperature plastic deformation of TiAl-based alloy with full-lamellar microstructure.

采用自制悬垂式流变拉伸机研究了TiAl基合金全层片状组织试样的高温塑性变形行为及过程。

Cobalt-based alloy is a kind of important materials used in elevated temperature.

钴基合金是一种重要的高温材料.

Elevated temperature tensile behaviour of NiAl-TiC in situ composites

NiAl－TiC内生复合材料的高温拉伸行为

Applications requiring strength at elevated temperature, e . g . engineering hardware, brake component.

用于在高温下需要保持强度的铸件, 如工程配件, 刹车组件.

Based on the concept of thermal activation of creep, a constitutive equation is given to describe the creep behaviour of materials at elevated temperature.

以蠕变过程中的热激活这一微观机理为基础，建立了蠕变曲线分析方程。

Review of shearing slip test of connectors for composite beams subjected to elevated temperature conditions

升温条件下组合梁连接件剪切滑移试验评述