end cap

The end cap will be used as the bearing or swivel point.

端盖将被用来作为轴承或旋转点。

Polypropylene filters feature popular end cap styles which fit most standard and sanitary style housings.

聚丙烯过滤器的新款的端部过滤帽,满足大多数标准的卫生的条件.

The groundhog still didn't have a problem with me scratching her back, and I got an idea, I'd always thought, while slicing up carrots, that the end looked like a cap.

土拨鼠仍然不介意我挠她的背。然后我有了一个想法：我切胡萝卜片时,总觉得胡萝卜的尾部看起来像一个帽子。

Position end cap on the rear of the retainer and the outer edge of the bumper.

在扣件尾部和保险杆边缘外部定位末端端盖.

The serious scalding fault at stator internal end cap of two 300 MW turbogenerators was found by using three dimensions electromagnetic numerical analysis calculation and real objet measuring at stator end region.

针对Y电厂2台300MW汽轮发电机定子内端盖严重灼伤的故障，采用定子端部三维电磁场数值分析计算及真机实测，准确地分析出灼伤原因是发电机定子端部漏磁场产生的涡流所致。

End Cap : Belt Tensioning System, easy access, easy adjustment.

完第:皮带张紧系统, 方便, 调整方便.

An end cap is end face.

每一端面接合有端盖.

Separate the end cap from the bumper.

将末端端盖和保险杆分隔开.

The end cap is provided with a connecting terminal which is fixed with the spring and the filter element.

端盖上设置有接线端子并在其上固定有弹簧与滤芯配合。

He stands on the southern end of the bridge, wearing sunglasses and a cap to block the hot sun.

他站在大桥南端，戴著墨镜和一顶帽子抵抗？阳。

Also includes non-twisting end tips and a metal bell cap.

还包括非扭结束技巧和一个金属钟帽。

The "AP" Bearing also contains a spacer, seal, seal wear rings, axle end cap, cap screws, locking plate and backing ring.

AP轴承还集成了隔圈、密封、密封耐磨环、轴端盖、端盖螺钉、锁定板以及后挡环等部件。

A method combining oil-filled housing heat dissipation and end cap heat dissipation was chosen to assure steady work of the junction box system. 2.

采用腔体内部充油散热和端盖散热相结合的方法，保证了接驳盒系统的稳定运行。

Pull back the wheelhouse liner and remove the bolts attaching the end cap the front fender.

拉下舵手室外套,拆去连接末端端盖到前挡泥板的螺栓.

The split type end caps are integrally formed by end cap connecting bolts in connection.

所述端盖为剖分式，通过端盖连接螺栓连接为一体。

The bottom Sn is welded on the end of the other guide wire to turn into the other electrode after the other guide wire passing through the lamp cap.

另一根导丝通过灯头后在其端部焊上底锡成为另一个电极。

It was found that the Cymbal transducer showed more axial displacement with less end cap thickness and Young's modulus, higher electric field on ceramic disk, bigger cavity diameter, and an appropriate cavity height.

结果表明：当盒盖厚度相对较小、盒盖弹性模量较小，陶瓷的厚度相对较小及较大的场强，空腔的半径相对较大，空腔的高度稍大于盒盖的厚度的时候，Cymbal驱动器具有较大纵向位移。

Install the bolts attaching the end cap to the front fender.

安装连接末端端盖到前挡泥板的螺栓.