error in position

This error in position is proportional to the depth of water, and is independent of the size of sand particles.

这个误差和水深成正比而和泥沙颗粒的大小无关。

Implementation of Coarseness-Precision Combining and Error Correcting in Shaft Position Encoders

轴角编码器中的粗精组合与纠错技术实现

The results from accuracy and precision tests of the instrument show that the maximum error in Raman peak position measurement is ± 1 cm-1.

经对仪器准确性和精密度的测定表明，测定拉曼峰位的最大偏差为±1cm－1。

To decrease the tracking error in AC position servo control system, a novel design approach of zero phase error tracking controller ( ZPETC) is proposed, which is called Extended Bandwidth Zero Phase Error Tracking Control ( EBZPETC).

本文针对位置伺服系统中存在的跟踪误差，研究了零相位跟踪控制的交流位置伺服系统，提出了一种简便易行的设计零相位跟踪控制器的方法&扩展频带零相位跟踪控制。

While 2D PSD photo potential gradually decreases from the incident position of light to four electrodes and impacts on each other in two vertical directions. For given parameters, the error between the detected position and true incident position is up to 60%.

而二维PSD的光生电势分布以光源照射位置为中心向四个电极递减，垂直方向互相影响，在给定参数下光的入射位置与真实值相比有60%的误差。

Since the stability of biped robot is intrinsically low, for improving the walking robustness to the irregular terrain and modeling error, a robust reactive force control and trunk's position/ attitude control with optimal force distribution are also considered in the course of system design.

为提高机器人对不平整路面的鲁棒性和克服系统建模误差，行走控制系统中采用了鲁棒地面反力控制器和基于地面反力最优规划的姿态控制策略。

Non-line-of-sight error is the key error in cellular mobile position system and directly restricts popularization and application of mobile position system.

非视距（NLOS）误差是蜂窝网定位系统的主要误差源，直接影响基于蜂窝网络的定位系统的推广和应用。

Spindle-shape model about point position error in line element

线元点位误差带的纺锤形模型

Machining Precision of High Precision Axial Assembling Dimensional Chain, Assembling Technology and Analysis of Error in Shape and Position in Exchangeability of Guide Apparatus

导水机构互换性中高精度轴向装配尺寸链的加工精度、装配工艺和形位误差分析

The reason of the error in axle-angle position coder for precision tracking and instrumentation radar is analyzed in this paper, and the concrete measures of controlling the error are also proposed.

分析了精密跟踪测量雷达用轴角编码器产生测量误差的原因，并结合实际提出了控制测量误差的具体措施。

Starting with the positioning principle of the Multi-target Telemetry and Tracking Integrated System, we analysed the relation between position error and observation geometry, and put forward a optimal observation geometry in practice.

从多目标遥外综合测量体制的定位原理入手，对定位误差与布站几何的关系作了较细致的分析，提出靶场最优布站几何。

At the base of this, we study the scrolling error in position calculation. 3.

并在此基础上，对位置计算中的涡卷误差进行了研究。

This paper analyses the basic philosophy of coarseness-precision combining and its error correcting in a shaft position encoder. On the basis of a 160DD × 4/ 16 multiwire rotatory transformer, a simple method of correcting encoding errors is given by using pure hardware circuits.

本文分析了轴角编码器中粗精组合与纠错的基本原理，并基于160DD×4／16多线旋转变压器，提出了运用纯硬件电路实现编码纠错的一种简单方法。

The experiments of error analysis in our WATO system demonstrate that the position and related calibration technologies have a high precision and can satisfy surgical requirement.

并通过在自己研制的WATO机器人辅助手术系统上的模拟误差分析实验证明了所分析关键技术具有较高的精确度，符合手术的基本要求。

Popper will place the "wrong" question in the beginning position in his own philosophy epistemology, will have the unique opinion to the error problem. It can be said that the core of his entire scientific philosophy will be surrounded by the error problem.

波普尔将错误问题放在自己哲学认识论中的起点位置，对错误问题有自己独特的见解，在一定意义上说，他的整个科学哲学思想体系都是围绕错误问题而展开的。

One or several of these base stations calculate and broadcast the correction information, and provide real time error correction for the satellite position users in this area. These are the definition of the network RTK technique.

并以这些基准站中的一个或多个为基准，计算和发播改正信息，对该地区内的卫星定位用户进行实时改正的技术称为网络RTK技术。

Comparing with conventional function based on generalized likelihood ratio, the new one considers estimate error in fused target position, which is more accurate to reflect the relationship between measurements and targets.

与传统的基于广义似然比的代价函数不同，改进的代价函数在计算中融入了目标位置的估计方差，能够更加准确地反映量测与目标之间的相关程度。

It is discussed that the system error and dynamic error, especially the dynamic error in position algorithm.

讨论了捷联式惯性导航系统的误差，对位置计算中的涡卷误差进行了推证。