gear drive

Gear drive is adopted to avoid the defect of loose gap chain drive.

采用齿轮传动式,避免了链条传动方式的有松动间隙的缺点.

This paper introduces the developing of a cylindrical gear drive with dual convex-concave mesh& the bidirectional circular tooth gear drive.

本文开发研究了一种具有双重凸凹啮合的圆柱齿轮传动&双向圆弧齿轮传动。

This paper describes a meshing analysis of the contrate harmonic gear drive which can quickly select the optimum transmission and determine the corresponding meshing parameters and structure parameters.

建立的端面谐波齿轮传动的啮合分析软件，可以较快地选取最佳传动方案，确定相应的啮合参数和结构参数。

Effect of Ambient Temperature on Backlash Error in Gear Drive Mechanism

环境温度对齿轮传动机构空程误差的影响

For gear drive, lubricant film between tooth surfaces is important to protect them from failure.

在齿轮传动中, 齿面间润滑油膜的存在及其厚度对防止齿面失效具有重要意义.

Study on Tooth Surface Temperature of Orthogonal Face-Gear Drive

正交面齿轮齿面温升的研究

You have to gear down when you drive uphill.

上坡行驶时必须换慢挡.

Adopt crank shift, link mechanism, and gear drive to improve work efficiency.

采用曲柄 、 连杆机构, 齿轮传动,省力是提高工作效率的利器.

Roller kiln using helical gear drive, oil bath lubrication.

辊道窑传动采用斜齿轮, 油浴润滑.

The machine's worm gear drive adopts fully-enclosed oil-immersed lubrication with long service-life, prevent cross pollution.

采用油 浸式 润滑的传动机构,密闭在机体下方延长了使用寿命, 避免了交叉污染.

Fabric take-up and batching mechanism, which used change gear drive for adjusting the fabric density.

采用交换轮调节织物密度的牵拉卷取机构.

According to plate-shell theory, location of rigid gear and flexible gear was changed with height location. On the basis of the mathematics model of contrate harmonic gear drive, the change law of meshing backlash of contrate harmonic gear was analyzed by meshing analysis software.

据板壳理论采用高度变位对刚轮和柔轮进行变位，在端面谐波齿轮传动数学模型基础上，用啮合分析软件分析端面谐波齿轮啮合侧隙的变化规律。

Spiral gear drive is the main drive mode of disk type separators.

碟式分离机螺旋齿轮传动为该类型机的主要传动方式.

Comparative study about the calculation of cylindrical gear drive design are processed between the standards of ISO/ GB and AGMA, then the specialty of calculating formulas is researched and the meaning and selection of relative fators are investigated.

对ISO/GB与AGMA标准下圆柱齿轮传动的设计计算方法进行了比较研究，较详细地分析了计算公式的特点及相关系数的含义与选取。

The invalidation of the harmonic gear drive is mostly the fatigue rupture of the flex spline.

谐波齿轮传动的主要失效形式是柔轮的疲劳断裂,小长径比的柔轮的强度更为薄弱.

It'synthesizes the advantages of belt drive , chain drive and gear drive.

它综合了带转动 、 链转动和齿轮转动各自的优点.

Using this method, we can protract vector analysis atlas of planetary gear drive mechanism.

应用此方法, 可定性地绘制出行星齿轮传动机构速度分析图谱.

A face gear drive with high contact ratio and good dynamic performance are considered.

一脸齿轮传动与高接触比率和良好的动态性能.

Being directed against elliptical gear drive a kind of non-zero modification method has been advanced.

针对椭圆齿轮传动提出了一种 非零 变位的方法.

To obtain the running consistency of the four mill containers, gear drive is used.

为了达到四个磨筒工作的一致性,传动方式采用齿轮传动.

With the transaxle at normal operating temperature, drive in 1st and 2nd gear for at least 1 minute each.

利用在正常操作温度的变速箱，在第一和第二档每个档位驾驶至少1分钟。

Bidirectional Circular Tooth Gear Drive

双向圆弧齿轮传动

Development of Large-sized Through-flow Pump with Bevel Gear Drive

圆锥齿轮传动大型贯流泵的研制

The stepless variable speed gear s drive and its motion analysis

齿轮无级变速传动及运动分析

Automatic yarn let-off system which used change gear drive for regulating run-in values.

采用交换齿轮调节送经量的积极 式 送经机构.

Analysis of Backlash in Spring Anti-backlash Small Modulus Gear Drive Train and Its Engineering Application

弹簧消隙小模数齿轮传动链回差计算分析及工程应用

The study indicates: compared with the calculation of ISO/ GB, numeric design and frame optimization in gear drive are implemented conveniently with the one of AGMA, but the conclusions from the two calculation of spur gear drive design lean to conservation.

研究表明，在齿轮传动CAD设计与结构优化方面，AGMA计算方法较ISO/GB易于实现；但两种计算标准的齿轮传动计算方法得出的结论均偏向保守。

The Harmonic Drive with Involute Gear Teeth Approaching on the Space of Construction Sedimentation Surveying

谐波传动装置的研究建筑物沉降时间间隔

Cast aluminum construction with high efficiency worm gear drive, built-in position indicator and easy-grip polypropylene handwheel.

铝铸件结构,配置高效蜗轮齿轮装置, 内 置 位置指示器和易于抓握的聚丙烯手轮.

Motion Analysis of the Planetary Gear Drive of the Double Crank Type

双曲柄式行星齿轮传动的运动分析