graft polymerization

In order to get better antifogging effect, the amount of MAA in the graft polymerization should be controlled.

为获得好的防雾性，单体MAA（甲基丙烯酸）的加入应适量；

Abstract Kinetics of BPO-initiated graft polymerization of methyl methacry-late ( MMA ) onto styrene-butadiene-styrene ( SBS ) has been studied.

本文研究了以过氧化苯甲酰(BPO)为引发剂,甲基丙烯酸甲酯 ( MMA ) 在苯乙烯 — 丁二烯 — 苯乙烯 ( SBS ) 上接枝聚合的动力学.得到了该聚合反应的表观速率与MMA的 浓度,BPO的浓度以及聚合温度的关系.

The graft polymerization processes could be controlled by monomer concentration, UV-irradiation time and photoinitiator concentration.

接枝聚合过程可以通过改变单体浓度、紫外辐照时间以及光引发剂浓度来进行调控。

Graft Polymerization of Acrylonitrile Initiated by Cerium Salt on Surface of Silica Gel Particles

铈盐引发丙烯腈在含醇羟基硅胶表面的接枝聚合

Research of Influence on Starch Graft Polymerization Reaction of New Type Initiator System

新型引发体系对淀粉接枝共聚反应的影响研究

The test shows that adding appropriate urea into the starch pasting system can be in favor of the graft polymerization.

实验表明，在糊化淀粉接枝的情况下，加入适量的尿素有利于淀粉接枝共聚反应。

A study on graft polymerization of vinyl monomer onto carbon black

乙烯基单体在炭黑表面上的接枝聚合

Synthesis of the Graft Polymerization of Methacrylic Acid onto Atactic Polypropylene

无规聚丙烯接枝甲基丙烯酸的合成

Commercial polysulfone membrane with negative surface charge was modified by low temperature plasma to initiate graft polymerization of 2-( dimethylamino) ethyl methacrylate ( DMAEMA), introducing positive charge onto HT membrane surface.

利用低温等离子体引发接枝反应，在表面带负电的聚砜膜上引入带正电的单体聚合物，从而减少膜表面净电荷。

A study on irradiation graft polymerization of chloroprene rubber with methyl methacrylate

氯丁橡胶辐射接枝甲基丙烯酸甲酯的研究

Reaction Mechanism of Radiation Induced Graft Polymerization on MgO Surface

氧化镁表面辐射接枝聚合反应机理研究

The surface modified SiC fine powder was prepared by organic coating through silane coupling agent hydrophobic processing and acrylamide monomer graft polymerization on its surface.

通过硅烷偶联剂疏水预处理和丙烯酰胺在其表面接枝聚合改性，获得了有机包覆的改性SiC微粉。

It was suggested that the graft polymerization of styrene onto the carbon black surface could be finished, using azo group supported on carbon black surface chemically.

研究表明：利用化学负载到炭黑表面的偶氮基团，可以实现苯乙烯单体在其表面的接枝聚合。

The thermoplastic elastomer was prepared by twin-screw extruder using PP/ PEAK obtained by solid state graft polymerization method as main raw material.

以固相接枝聚合的聚丙烯/聚丙烯酸乙酯（PP/PEAK）共混物为主要原料，加入各种助剂，用双螺杆挤出机制备PP/PEAK热塑性弹性体。

The grafting yield-time and conversion rate-time curves indicated that the graft polymerization of DMAEMA and HEMA monomer had the characteristics of living polymerization.

真丝的接枝率时间及转化率时间曲线表明两种单体的接枝聚合具有活性聚合的特征。

Study on Graft Polymerization of Acrylamide onto Carbon Black with Manganic Pyrophosphate Complex as Initiator

焦磷酸络锰（Ⅲ）引发炭黑表面接枝聚合研究

Insoluble chromogenic inulin gel was made through graft polymerization and staining with inulin, Glycidyl methacrylate ( GMA), tetramethylethylenediamine ( TMEDA) and active dye.

本研究以菊粉、甲基丙烯酸缩水甘油酯（GMA）、四甲基乙二胺（TMEDA）和活性染料为主要原料，通过接枝聚合制备菊粉凝胶，再经染色，制成不溶性呈色菊粉。

It relates to reaction principle of CR with methyl-acrylate graft polymerization, formulation of adhesive solution and manufacturing technology.

叙述了氯丁橡胶与甲基丙烯酸甲酯接枝聚合的反应原理，胶粘剂溶液的配方以及制造工艺操作过程。

A Study of Free Radical Graft Polymerization of Styrene onto Carbon Black Surface

苯乙烯在炭黑表面自由基接枝聚合研究

graft polymerization of methyl methacrylate onto nylon 66& dimethylaniline/ copper nitrate system

尼龙66与甲基丙烯酸甲酯接枝共聚合的研究&DMA/硝酸铜引发体系

The chemical modification of PHB is comprised of radiation-induced graft polymerization, polymerization based on PHB prepolymer, reactive polymer blending, etc.

PHB化学改性的方法包括辐射聚合、大单体反应改性、反应性共混等。