hot press

Photocell control device, hot press printer, printer, feeder and belt conveyer.

光电控制装置, 热压印装置, 打印机, 振动送料机,产品输出皮带机等.

The Design of Hydraulic System to Reduce Energy Depletion of Wood-based Multilayer Panel Hot Press

人造板多层热压机低能耗液压系统设计

Improving design on hydraulic system of single opening hot press for thin MDF

中密度薄板单层热压机液压系统的改造

When setting temperature of hot press drum to 40 degrees Celsius.

这时热压滚筒温度可调至40摄氏度.

The article studies the red-oak-veneered-technology on the multi-plywood of poplar. It designs the L_ ( 16)( 4~ 5) orthodoxy-corrected test by added-material, adhesive content, unit press, temperature and time of hot press which affect the surface quality of veneered furniture of poplar.

以红橡薄木和杨木多层板为材料，根据影响薄木饰面家具表面质量的因素，对添加剂、涂胶量、热压压力、热压温度、热压时间5因素进行4水平的L16（45）正交试验；

The improvement on supply and return steam line for hot press

热压机供回汽系统改进

Hot press reaction sintering and mechanical properties of boron carbide

B4C陶瓷热压反应烧结及力学性能

A Design for the Hot Press Machine of Movable Table

移动式工作台热压机的设计

Effects of Hot Press on Rice Husk/ Wood Composites

热压工艺对稻壳-木材复合材料性能影响的研究

In order to reduce moisture content of compressed wood and improve its moisture distribution, two methods can be adopted, one is to lower down initial moisture content of thinnings to be compressed, the other is to extend the hot press time.

为了降低压后含水率，使水分分布均匀，可以采取两种办法：一是使初始含水率尽可能低，二是热压时间尽可能长。

Analysis and Implementation of Hot Press Process in Large Scale LOM

大型原型LOM工艺中热压工艺的分析及系统实现

Prepare Ti_3Al/ TiC+ Al_2O_3 Ceramic Composite by Phase Change in Solid State-Sintering under Hot Press

固态相变-热压烧结制备Ti3Al/TiC+Al2O3陶瓷复合材料

It showed from experiments that the best approach to the treatment of fine grained disseminated gold ore was hot press oxidation of flotation concentrate of pyrite followed by cyanide leaching. formed is reacted with excess of iodide in an acidic medium to give free iodine ( I?)

试验结果表明：对含金黄铁矿精矿进行压热氧化&氰化浸出，是处理该微细粒浸染型金矿石较有效的方法。

With the different working conditions, the life of hot press roll forging die is quiet different.

因工作条件的不同, 辊锻模寿命相差也极为悬殊.

By analysis and contrast, as the dynamic transmission device of wood-based multilayer panel hot press, obviously, this system will lower the energy depletion, save energy, and improve the working performance of the hot press.

经分析、对比，该系统作为人造板多层热压机动力传递装置，明显降低了能耗，节约了能源，并改善了热压机的工作性能。

The preliminary on the sliding wheel type automatic water proof and immersion proof equip ment's design for the hot press used for fiber board production with wet process

湿法纤维板热压机滑轮式自动挡水防渍装置设计浅探

The Research into Heating Facility in Hot press Machine Tool

热压机床加热系统的研究

In this paper, the preparation process of thermosetting resin composite materials from ramie noil fiber, hot press felt and non woven fabrics were introduced.

本文介绍了落麻纤维、落麻热压毡、落麻无纺毡制备热固性树脂复合材料的工艺过程；

Joining Tungsten Alloy molybdenum Layered Flier plates by Hot press Sintering

钨合金-钼叠层飞片的热压烧结连接

Color after arrival on paper, a number of fixed by hot press.

色料到达纸面上后, 多靠热压固定.

Thermoelectric Properties and Synthesis of Filled Skutterudite Compound by Mechanical Alloy and Hot Press

机械合金化-热压法合成填充式Skutterudite化合物及电性能研究

Radial bamboo strip curtain laminated board had the advantages of higher bamboo utilizing ratio, higher hot press output, better product quality and lower cost compared with bamboo strip laminated board.

两者与之相比，径向竹篾帘层积材具有竹材利用率高、热压机产量高、能耗低、产品质量好和成本低的优点。

Grade of precision of parallelism of large-Scale Hot Press is the most important parameter.

热板平行度精度是衡量热压机制造精度的重要数据.

During the operation of hot press, because there was hysteresis characteristic in the proportional overfall valve, the regular control of press was not very clear, we used "PID-FUZZY" control policy for the hot press, got good results from the simulation operation.

针对实验压机运行过程中存在的由比例溢流阀的滞环效应所引起的常规控制方式对压力控制效果差的问题，采用PID-FUZZY控制策略对热压压力进行调节，模拟运行并取得了良好的效果。

At the polyalkene Oct . 1999, after the injection molding, hot press as molding.

一般以聚烯烃为主要原材料, 经过注塑 、 热压等工艺加工成型.

A microcomputerized control system for hot press in making hardboard is de-signed.

本文提出了一种硬质纤维板热压 机微机 控制系统的设计方案.

Study on the stress of lumber in the process of hot press drying

木板热压干燥应力研究