intermetallic compound

The wetting layer may be substantially subsumed in the high content solder forming an intermetallic compound layer.

可将润湿层基本包含于高含锡量焊料中以形成金属间复合层。

High temperature deformation behaviour of TiAl intermetallic compound

Ll0型TiAl金属间化合物的高温形变行为

A composite MF membrane consisting of a nickel layer on a porous TiAl intermetallic compound substrate was prepared using sedimentation method and dip-coating method.

用悬浮粒子烧结法在钛铝金属间化合物支撑体上制备Ni微滤膜。

A hyperpolyhedron model obtained by pattern recognition methods can be used to describe the boundaries of the zone of ternary compound formation in the multi-dimensional space, with good ability of computerized prediction for ternary intermetallic compound formation.

由模式识别方法所得超多面体模型可用于描述多维空间中三元金属间化合物形成区的边界，且能预报三元金属间化合物的形成与否。

Properties and application of intermetallic compound molybdenum disilicide

金属间化合物二硅化钼的性能及应用

The NiAl intermetallic compound and its alloy were prepared by Self-reaction High-temperature Synthesis technology and powder metallurgy technique.

采用自反应高温合成技术及粉末冶金工艺制备了NiAl金属间化合物及其合金。

Atomic parameter pattern recognition method [ 2] is used to study the regularities of formation of binary intermetallic compound between nontransition elements.

利用原子键参数－模式识别方法研究非过渡元素组成的非过渡金属二元系形成中间化合物的规律性。

Regularities of Formation of Binary Intermetallic Compound between Nontransition Elements

非过渡元素间二元合金相的中间化合物形成规律研究

The compose and microstructure of intermetallic compound after temperature cycling test are also observed by scanning electron microscope ( SEM).

通过扫描电镜（SEM）对温度循环试验后焊球金属间化合物（IMC）层和剪切强度试验后的断裂面进行了形貌、结构和组分的观察及分析。

The crystal and magnetic structure of intermetallic compound with the nominal composition YFe_ ( 10) Si_ ( 2) was studied by neutron powder diffraction at room temperature.

在室温下利用中子粉末衍射方法研究了名义成分为YFe10Si2金属间化合物的晶体结构和磁结构。

Preparation and properties of microporous TiAl intermetallic compound filter membrane

TiAl金属间化合物微滤膜的制备与性能

Microstructure of the Reaction Zone and the Growth Behaviors of the Intermetallic Compound in Ti/ Fe Contact Reaction

Ti/Fe接触反应区微观组织及Ti-Fe化合物的生长行为的实验分析

When content of Ti-C reached 50% approximately, compact intermetallic compound matrix composite was formed with TiC particulate inlaying in NiAl.

当Ti-C含量达50%左右，TiC颗粒镶嵌在熔融后凝固的NiAl基体上，形成较致密的金属间化合物基复合材料；

In fact, the thickness of the intermetallic layer is determined by a combined process including simultaneous dissolution and growth of the intermetallic compound.

实际上，在化合物层的生长过程中同时也伴随着溶解过程，由于其生长速度大于溶解速度，化合物层厚度随钎焊时间的增加而增加。

Methods for Toughening of Laves Phase Cr_2 Nb Intermetallic Compound

Laves相金属间化合物Cr2Nb的增韧方法

The alloy layer of tinplate is an intermetallic compound formed between base plate and tin coating through thermodiffusion during the treatment of heating and fusing after electrotinning.

镀锡板合金层是镀锡后在加热熔融处理过程中通过热扩散在基板与锡层之间生成的一种金属间化合物，因此，合金层的生成与原板和镀层都有很大关系。

Tt was because the solubility was not mutually big between titanium and copper, and the solubility changed when the temperature changed, it had a the very big tendency to form intermetallic compound and eutectic.

这是由于钛与铜相互之间的溶解度不大，并且随温度而变，具有很大的形成金属间化合物和共晶体的倾向。

The formation mechanism of amorphous phase, intermetallic compound, supersaturated solid solution and nanocrystalline is reviewed.

着重评述了机械合金化过程中非晶态 、 金属间化合物 、 过饱和固溶体及纳米晶形成的特点及机制.

Study of High-Temperature Abrasive Wear Performance of Cold-Sprayed FeAl Intermetallic Compound Coating

冷喷涂FeAl金属间化合物涂层的高温磨损性能研究

Experimental Study on Thermal Explosion Dynamics of NiAl Intermetallic Compound

NiAl金属间化合物热爆合成动力学的试验研究

Dislocation features in FeAl intermetallic compound after deformation at high temperature

高温变形FeAl金属间化合物中的位错特征