With rich experience in designing and advanced3D design software like CATIA, PRO-E and so on, we've been successful in the market.

The thesis also uses PRO-E to analyzing the gear-cam composite and gear-pole composite mechanism by the modeling and simulating design.

本文还运用PRO-E对齿轮-连杆组合型托料机构以及自行设计的齿轮&凸轮组合型托料机构进行了建模和运动仿真。

Using software PRO-E to build the model of the impeller 、 diffuser with blade 、 entering air elbow 、 volute.

用PRO-E软件对进气弯管，带分流叶片的叶轮及有叶片扩压器进行了实体建模。

In this paper, model of Pro-E and ADAMS of the engine with new multi-link mechanism is set up using dummy prototype technology.

运用虚拟样机技术对所提出的一种用于内燃机的新型多杆机构建立了Pro-E以及ADAMS模型。

3D-Modelling, and Simulation Analysis for the Milling Machine'S Aggregate Transportation Mechanism Based on Pro-E/ ADAMS

基于Pro-E/ADAMS的路面铣刨机集料输送机构的三维建模与仿真分析

In this chapter, mechanical construction and thermal set architecture of the light engineer are simulated in PRO-E from.

⑷设计了光轮旋转体的机械构造和散热风扇结构PRO-E设计模型。

Application of Developing Hot Exchangers with Pro-E

Pro-E在换热设备研发中的应用

The Bevel Gear ′ s Modeling Scheme with the Spinal Bend feature Based on PRO-E

PRO-E中的直齿锥齿轮骨架折弯建模方案

Use a widely used software Pro-e to draw the part model and assemble into equipment model.

使用应用广泛的Pro-e软件，绘制出零件模型，并组装成部件。

Three-dimensional Entity Simulation Research of Aviation Arc Face Gear Based on Pro-E

基于Pro-E的航空弧齿面齿轮的三维实体仿真研究

Creating the 3D Solid Model of Helical Gear Based on Pro-E

基于Pro-E的斜齿圆柱齿轮三维实体造型

Research of application of Pro-E in teaching of machine tool jig design

Pro-E在机床夹具设计教学中的应用研究

With finite element software COMSOL, that can simulate ECT systems, the establishment of a two-dimensional electric field distribution ECT system model, solution capacitance values and sensitivity field matrix, image reconstruction algorithms for the latter part of the prior information. 2.

借助有限元软件COMSOL，对ECT系统进行仿真计算，建立了ECT系统的二维电场分布模型，求解电容数值和灵敏度场矩阵，为后期图像重建算法提供先验信息。

Since the mathematical model is nonlinear partial differential equations, and each equation is closely coupled, therefore discretized and solved by numerical methods, the mathematics model solved by finite volume method of FLUENT and finite element method of COMSOL in this paper.

由于数学模型主要是非线性偏微分方程，且各方程耦合很紧密，因此采用数值方法进行离散求解。本文分别采用FLUENT的有限体积法和COMSOL的有限元法来求解数学模型。

COMSOL simulation can be used to forecast the law of soluble pollutants moving in the groundwater flow in different conditions, to predict pollution halo, pollutants distribution, and this method is universally applicable to all groundwater pollution problems.

采用COMSOL可以模拟地下水流动和不同时间条件下地下水系统中可溶性污染物的动态变化规律，预测污染扩散、污染浓度的时空分布特征，该方法对其它地区地下水污染问题普遍适用。

Chapter III takes a test of argon plasma discharge detailed under the fluid dynamic model. The COMSOL software is used for the comparison test to verify the correctness of the momentum equation and the drift-diffusion approximation algorithm.

第三章详细的对氩气等离子体放电的流体力学模型进行了测试，测试过程包括采用COMSOL软件对流体力学模型下动量方程算法和漂移扩散近似算法进行了对比测试验证。

On the basis of leaching experiment data, Darcy law and Solute migration as basic equations, we simulates a time-dependent porous media which produced by gravity flow of the basic model with the help of COMSOL software.

以浸出实验数据为依据，达西定律、溶质迁移扩散为基本方程，借助COMSOL软件，建立了与时间相关的多孔介质中由于重力作用产生流动的基本模型。

The temperature and voltage characteristics of photonic crystal fiber which is the type of refractive index guide filled with liquid crystal in the infrared wave band are analyzed by the finite element software: Comsol.

用有限元软件Comsol分析了红外波段下的填充液晶后的折射率引导型的光子晶体光纤的温度和电压传感特性。

United COMSOL with MATLAB programming, numerical results show that on the target wave number the acoustical performance of the optimized muffler is much better than a simple expansion chamber muffler considerably.

联合COMSOL与MATLAB编程，数值计算结果表明在目标波数下优化后的消声器声学特性远优于简单膨胀腔消声器。

Based on the existing data, we computed the electromagnetic forces field with COMSOL Script. We stored the results as. txt files in order to be called in other programs.

根据现有数据，使用COMSOL Script预先计算电磁力场，将得到的结果保存为.txt文件，存放在指定文件夹下，以备调用。

COMSOL is the commercial software which is mainly used in the calculations of structural mechanics, and it adopts the finite element method. A separate plasma module is also provided in this software.

COMSOL软件是以结构力学计算为主的商业软件，采用的是有限元法并且配有单独的等离子模块。