The Selection of Cathode Protection Method on Crude Tank Bottom Plate and Parameters Calculation

Inspection Techniques and Cathodic Protection for Crude Oil Tank Bottom Plates

原油储罐底板的检测技术及阴极保护

The Study on Measurement Method of Protection Potential for Outer Shell of Tank Bottom Plate

罐底板外壁阴极保护电位测量方法

Adjust the arm to reduce its distance to tank bottom.

通过改变鹤管，使鹤管距罐底的距离减小。

Leakage Simulation Test and Calculation of Seepage Quantity of Oil Tank Bottom Plate

油罐罐底渗漏模拟试验及渗漏量计算

Maintenance of Tank Bottom Plate and Countermeasures against its Welding Deformation

油罐底板检修及其焊接变形的防治措施

Effect of models for tank bottom upon stress calculation in large tank shell

罐底模型对罐壁应力计算的影响

Discussion on Potential Distribution Law of Cathodic Protection on Tank Bottom Plate

储罐底板阴极保护电位分布规律探讨

The source of acid contained in the water of storage tank bottom

储罐罐底水含酸及对喷气燃料性能的影响

Calculation Method To Determine The Mass Of Oil Tank Bottom Plate

油罐底板质量计算方法

The construction of the large oil tank bottom and the control of welding deformation

大型油罐罐底施工及焊接变形的控制

Analysis on the CP Detection Data of Storage Tank Bottom

大型储罐罐底阴极保护检测数据及其分析

The tank body uses sand blast, rust removal technique and high-grade polyaminepaint, which can make the paint have a strong adhesion force, beautiful, bright and persistent.

罐体采用喷沙除锈等工艺，采用高档聚胺脂漆，油漆粘附力强。美观、光亮、持久。

The unloading system is arranged at the bottom part of the tank body, and a spiral conveyor is supported by a rotating shaft seat and a position-limiting seat.

罐体底部设置有卸料系统，其螺旋输送器由转动轴座和限位座支撑。

The utility model installs the spray nozzle, which is capable of adjusting the concentration of the material inside the tank body and in favor of outflowing of the material.

本实用新型增加喷咀可以对罐体内的物料浓度进行调节，同时利于物料的流出。

The key technology is that a baffle is transversely mounted in the tank body, and a hand washing baffle is mounted vertically on the baffle.

其关键技术是在箱体内横向安装隔板，在隔板上竖向安装洗手隔板。

The major loads borne on the tank body are analyzed, and stress measurements, from the preparation work to static and dynamic test conditions as well as data processing are presented in this article.

从罐体承受的主要载荷分析、测试前的准备工作到罐体的静、动态试验以及应力电测试验数据处理等都作了简要地介绍。

The feed inlet of the tank body is provided with a feed inlet valve, and materials falling buffer mechanisms are arranged in the tank body in different heights.

罐体进料口设有进料阀，罐体内不同高度设有物料下落缓冲机构。

The exterior of the tank body is provided with an interlayer water jacket provided with a constant temperature heating device and a water inlet and a water outlet valves.

在罐体外部装有夹层水套，水套中装有恒温加热装置，水套上设有进、出水阀。

The transport vehicle is composed of a motor-vehicle chassis, a vehicle frame, a tank body, an unloading system, a hydraulic system and a transmission system.

它由汽车底盘、车架、罐体、卸料系统、液压系统和传动系统组成。

The charging device is provided with a conduit which is inserted in the tank body and arranged on the bottom of the tank body.

加料装置设有导管，该导管插设入槽体内并置于槽体底部。