Preparation of Coated Graphite Tubes and Determination of Tin in Aluminium Alloys by Graphite Furnace-Atomic Absorption Spectrometry

Synthesis of highly dispersed tin and tin-cobalt alloys

高分散锡和锡钴合金复合嵌锂材料的合成

Separation of Zinc and Enrichment of Tin from Zn-Sn Alloys Wastes Via Vacuum Distillation

废弃锌锡合金真空蒸镏富集锡分离锌

Bright electroplating of tin-lead alloys

光亮铅-锡合金电镀

Thermodynamics of Surface Corrosion of Solid Pure Lead 、 Tin and Thier Alloys

固态铅、锡及其合金表面腐蚀热力学

The establishment of the numerical simulation of material model for tin bronze alloys equal channel angular pressing, analysis process of metal flow, temperature distribution and stress distribution, impact of friction coefficient, dead zones were also discussed. 3.

建立锡青铜等通道弯角挤压的数值模拟材料模型，对金属流动过程、温度分布、等效应力分布等进行了分析，对摩擦系数、死区的影响进行了讨论。

This method is easy to control, steady for reaction and exact to measure. And this method is better for the content of tin in alloys between 0.01% and 1%.

该方法条件易控制、稳定、准确，对锡量在0.01~1（%）测定较为优越。

Spectrophotometric Determination of Copper in Tin Alloys With CPA ⅲ

CPAⅢ光度法测定锡基合金中的铜

Simulation and Optimization of the Stirring Heater of Aluminum Tin Alloys

铝锡合金电磁搅拌器的优化分析

Study status and prospect of tin alloys depositing process

锡合金镀层工艺的研究现状及展望

Copper and tin and their alloy, bronze, were by far the most important.

铜、锡以及二者的合金&青铜是顶顶重要的金属；

Determination of Aluminium Lead Iron Cadmium Copper Tin in Zinc Alloy by Direct Reading Spectrometry

直读光谱法测定锌合金中的铝铅铁镉铜锡

Lead, tin and tin-lead alloy electroplating technologies using these two products are introduced.

介绍了采用两种产品的电镀铅、锡及铅-锡合金工艺。

Application of lubrication protective agent on electrical contact surface of tin and tin alloy deposit

润滑保护剂在锡及锡合金镀层电接触表面的应用

Rapid polarography Determination of Micro Amounts of Tin in Copper Alloy

铜合金中微量锡的快速极谱测定

Study of electrodepositing bright Tin Cobalt Zinc alloy from weak acid solution

微酸性体系电沉积光亮锡钴锌合金的研究

This article describes the determination of cobalt and stannous ions in black tin cobalt alloy electroplating baths by means of spectrophotometry. The effect of measuring wave length, oxidant, addition of potassium pyrophosphate, interfering elements and other affecting factors on the measured absorbance were investigated.

利用分光光度法测定锡钴合金镀液中钴（Ⅱ）和锡（Ⅱ）的含量，探讨了测量波长和氧化剂的选择、焦磷酸钾的加入量、干扰元素等对测量结果的影响。

The proposed method has been successfully applied to the determination of Cu, Pb, Zn and Cd in tin basis alloy and waste water of electroplating.

本文提出的方法已成功地应用于锡基合金及电镀废水中铜、铅、锌和镉的测定，准确度好。

Tin Lead Alloy Plating

印制板与无铅化无铅覆铜板电镀锡铅合金

Rapid solidification of undercooled nickel-tin eutectic alloy

深过冷Ni&Sn共晶合金的快速凝固机制

Rapid Determination of Nickel in the Acidic Brightening Tin Nickel Alloy Plating Bath

酸性光亮镀锡镍合金镀液中镍的快速测定