As the diamond tip of the drill revolves, it is lubricated by mud.

In IMP thrusters, the motor stator ( core and winding) installed in the duct, the rotor ( permanent magnet pole) installed at the tip of with rings propeller blade leaves and appeared in the form of rings.

IMP推进方式中，电机的定子（铁心及绕组）安装在导管中，转子（永磁磁极）安装在带环螺旋桨桨叶的叶梢以环的形式出现。

The prediction capabilities of computational fluid dynamics ( CFD) used for simulation of flow fields in stirred vessels were assessed, and flow behavior at blade tip and the vicinity of blade was analyzed.

考察了计算流体力学（CFD）模拟搅拌设备流场的预测能力，分析了搅拌桨叶端及附近区域的流动行为。

Secondly, the stress intensity factor at the tip of crack of rotating blade was calculated using weight function method.

然后根据权函数思想，推导出了高速旋转叶片裂纹尖端处的应力强度因子公式；

ⅳ region is trailing edge vortex region of tip near the flange of blade.

Ⅳ区为叶片出水边靠尾部的轮缘出口尾涡区。

Elbows parallel to the body, not prominent, and well set back to allow a line perpendicular to the ground to be drawn from tip of the shoulder blade through to elbow.

肘部与身躯平行，不突出，位置恰当，从肩胛顶端到地面的垂直线正好经过肘部。

The result shows: short splitter has weak influence on the suction pressure distribution, leakage flux and the position leakage vortex rotated on the tip of principle blade.

结果表明：短弦长小叶片对大叶片吸力面负荷分布、泄漏量以及泄漏涡的产生位置的控制作用较弱；

In addition, the tip of the blade is always thinner, which lead to deformation easily, so there is a higher demand for the stability of the machining system.

此外，桨叶叶梢部分较薄，加工中易引起变形，这给加工系统的稳定性提出了更高的要求。

He put the tip of the blade into Gus's shirt and then made an arc with his arm, as though cutting a circle.

他把尖刀伸进格斯的衬衫，随手用胳膊划了个弧圈，仿佛要圆圆地剐下一块肉来。

The efficiency of pump will be reduce with the increase of tip clearance of blade.

泵的效率随轮缘处间隙变大会有明显减小。

Thus, 30% from the tip of leaf blade was the best measuring position.

因此，距叶尖30%处是最合适的测定位置。

Welding of Rivets on the Tip of Blade for Turbine

汽轮机叶片端部铆钉的焊接修复

Aimed at the appearance of multi-pixels width of skeleton, this paper gave the definition of tip, node, tail and burr, and a design of an algorithm for iteration burr.

针对数学形态学骨架化算法可能出现的多像素宽度情况，定义了端点、节点、尾支和毛刺等概念，在此基础上设计了一种分级毛刺去除算法。

Finally, an important combination parameter was put forward to reflect the overall influence of blade loading and tip clearance distribution on the tip leakage mixing loss.

最后提出一个重要的组合参数，反映了叶片尖部载荷和叶尖间隙的流向分布对叶尖泄漏掺混损失的综合影响。

Downstream rotor-stator interaction increases the unsteady fluctuating intensities of the rotor tip clearance flow and the tip leakage loss.

下游静叶干涉增加了动叶顶部间隙流的非定常波动强度和泄漏损失。

The morphological abnormalities were observed in the hyphae body of V. paulowniae after treatment of the pathogen with the fermented broth of S-921 strain, with significantly increased amount of vacuole, condensed cytoplasm, inflated hyphae tip and loss of pathogenicity of the pathogen.

经S-921菌株发酵液浸泡处理的泡桐腐烂病病原菌菌丝体，会出现大量液泡，原生质凝集，菌丝尖膨大等异常形态，并失去致病力。

Mixed flow compressor achieves better performance and lower tip leakage loss, and flow field at outlet is more uniform in mixed flow impeller than centrifugal impeller.

计算结果表明在高比转速情况下，斜流叶轮有利于减弱叶尖泄漏损失，改善叶轮出口均匀性，提高叶轮效率和级效率。

Five turbine tip clearance loss models, widely used in engineering practice, were analyzed and compared comprehensively on the basis of the CFD numerical simulation.

这里基于CFD数值计算的结果，对5种工程上常用的涡轮叶尖间隙流动损失模型进行了全面的分析比较。

Keep as much line off the water as possible by raising the rod tip and stripping in line as the streamer drifts towards you.

当饰带毛勾向钓手位置漂流时，尽可能提高竿尖及收丝使飞蝇线离开水面。

As the fly passes and drifts downstream, lower the rod tip and feed line to the drift.

当饰带毛勾漂流到下游时，降低竿尖和增放飞蝇线使饰带毛勾继续漂流。

The tip of her line is her bait.

这个末端就是她的饵儿。