Finite element analysis of rolling contact characteristics for radial tire with grooved tread patterns

Static Finite Element Analysis for Effect of Belt Angle on Radial Tire with Complex Tread Patterns

帘线角对子午线轮胎力学性能的影响&基于含复杂花纹的轮胎有限元静力分析研究

Improving High Speed Performance of Radial Passenger Car Tire with Nylon Cap Ply

采用尼龙冠带层提高轿车子午线轮胎高速性能

Analysis of endurance performance for radial tire with FEM

滚动轮胎耐久性有限元分析

Analysis for influence of belt reinforcing materials on mechanical properties of tire with FEA

有限元分析带束层骨架材料对轮胎力学性能的影响

These conclusions have an important role for the structure design of the tire with complex pattern.

这对复杂花纹轮胎的结构设计分析具有很好的指导意义。

Eva tire with just one color, without break.

只有一种颜色的塑料发泡轮胎，没有制动闸。

Study on tread compound formula design of green tire with orthogonal rotating design method

用正交旋转设计法探讨绿色轮胎胎面胶配方设计

Equivalent curing used for curing tire with steam and nitrogen gas

等效硫化在轮胎蒸汽/氮气硫化中的应用

A Developing Study on Experimental Technique of Tire with Prospective Application for Vehicle Performance

轮胎试验技术的开发研究及其在汽车性能研究中的应用前景

So the author do a lot of research and study on the automatic system of making tire valve and has made out a automatic system for assembling tire valve.

鉴于此，作者从以下几个方面对全自动气门芯装配系统作了深入的研究，开发出了一台全自动气门芯装配系统。

Took to the traditional process improvement, proposed one kind in view of the tire valve cone-shape packing surface trundle processing method.

作为对传统工艺的改进，提出了一种针对气门锥形密封面的滚压加工方法。

Tim takes a tube out of the car and sticks it on the tire valve.

Tim从车上拿出一条管子并把它插在轮胎气门嘴上。

And the influences of axle load and vehicle speed and tire pressure and the thickness of the surface layer on the dynamic response of the inverse structure asphalt pavement were studied.

深入研究了轴重、速度、胎压和面层厚度对倒装结构动力响应的影响。

Road-paving asphalt meeting the required specifications can be prepared by mixing coal tar with fluid catalytic cracker ( FCC) bottoms and whole used tire, excluding steel belts, at proper ratios.

把煤焦油、流化催化裂化（FCC）重油和全旧轮胎（除去钢带）按合适的比例混合，就可得到符合规格要求的铺路沥青。

The results show that in order to get plastic inclusion in tire cord steel, the oxygen potential in liquid steel must be in the range of 0.005 6 to 0.011 3 and dissolved aluminum must be in the range of 0.000 10% to 0.000 25%.

结果表明：生产帘线钢时，为了得到塑性良好的夹杂物，钢液的氧活度应控制在0·0056~0·0113，而酸溶铝含量应控制在0·00010%~0·00025%范围内。

The quality requirement of tire cord steel have been discussed in this paper. Factors influencing the quality of tire cord steel was also analyzed, such as inclusion size, morphology, and structure, surface quality, segregation of hot rolling wire rods.

阐述了帘线钢的质量要求，并对影响帘线用钢质量的各种因素进行了分析：主要包括钢中夹杂物的尺寸、形态，热轧线材的组织及表面质量、偏析程度等；

The effect of top slag composition on MnO-Al2O3-SiO2 inclusion composition was studied by controlling the condition of deoxidization and the composition of top slag in an experimental furnace in which the tire cord steel were melt.

在实验室中使用高温管式炉对以工业纯铁为原料配制的帘线钢进行脱氧和顶渣熔炼，研究了顶渣成分对MnO-Al2O3-SiO2类夹杂物的成分的影响。

The control of CaO/ SiO2 and Al2O3 composition in CaO-SiO2-Al2O3 inclusion has been systematically studied and the condition of forming CaO-SiO2-Al2O3 inclusion in tire cord steel has been discussed by thermodynamic calculation.

对帘线钢中CaO-SiO2-Al2O3类夹杂物CaO与SiO2的比值和Al2O3含量进行了研究，并且通过热力学计算对CaO-SiO2-Al2O3系塑性夹杂物的生成条件进行了讨论。

In the production process of tire cord steel, total oxygen and inclusion composition is controlled by using Si-Mn alloy and changing refining slag. The inclusion morphology is improved greatly.

在帘线钢的生产中，通过采用Si-Mn合金终脱氧以及改变精炼渣系，达到控制钢中酸溶铝含量，进而控制钢中夹杂物组成的目的，改善了夹杂物形态；

Main equipments and operation schedule for producing tire cord steel in Shagang are described.

介绍了沙钢生产帘线钢的主要设备及工艺操作规程。