The relation between differential driven ratio accuracy and the common normal length change of cylindrical bevel wheel has been found by experimental method, which provided a efficient way for cylindrical bevel wheel manufacturer to control the common normal length change of the wheel.

The inputting of bevel wheel ′ s parameters on a style of standard control with interface of Visual Basic is realized and the standard bevel wheel of 3D with parameters input is formed.

并且以标准控件的形式，结合VB开发语言界面，实现了对斜齿圆柱齿轮的参数输入，并根据所输参数生成相应的斜齿圆柱齿轮。

But shaping as one of the bevel wheel' cutting technique has not realized the Computerized Number Control completely, it still must use the helix track to realize the spire move.

插齿加工作为斜齿轮切削加工的一种不可替代的加工方法还没有实现完全数字化控制，螺旋导轨依然是实现螺旋运动的机械副件。

Consult with the fault modes of rotating mechanics and bevel wheel, the fault modes of screw compressor rotor are founded together under the practical engineering.

本文综合考虑斜齿轮以及旋转机械转子的故障模式，结合具体的工程实际建立了螺杆压缩机阴阳转子的故障模式。

With the development of machine's high speed, over loading, lower noise, the bevel wheel is applied more and more at large.

随着机器向高速、重载、低噪音方向的发展，斜齿轮的应用越来越普遍。

The paper analyzes the causes of tooth alignment errors in bevel wheel machining, and gives eliminating method for the causes.

分析了斜齿轮加工中齿向误差产生的原因，并对所产生的原因提出了消除误差的方法。

The design thought and the implementing process were explained by a example, involute bevel wheel parameterized sculpting design.

并以渐开线斜齿轮参数化造型设计为实例，介绍了设计思路和实现过程。

So using CNC substitute helix track and realizing bevel wheel's shaping CNC have important realism meaning.

因此，利用数字控制取代螺旋导轨，实现斜齿插削加工的CNC控制具有重要的现实意义。

Study on the relation between differential driven ratio accuracy and the common normal length change of cylindrical bevel wheel

磨齿加工时公法线长度的计算差动传动比精度与斜齿圆柱齿轮公法线长度变动量关系

Evolutional Method of Machining Screw Bevel Wheel on General NC Milling Machine

普通数控铣上螺旋锥齿轮的展成法加工

Causes and Eliminating Method of Tooth Alignment Errors in Bevel Wheel Machining

斜齿轮加工中齿向误差产生的原因及消除方法

Bevel wheel reducer to keep long life, lower noise, stable running.

采用斜齿轮减速箱，寿命长、噪音低、运转平稳。

The Failure Analysis of Large Bevel Wheel

40Cr钢大型斜齿轮失效分析

Discussion on Coordinated Methods and Technique of Bevel Wheel and Worm

论斜齿轮与蜗杆配合方法和工艺探析

Engineering Analysis of Bevel Wheel Based on Pro/ E and ANSYS

基于Pro/E与ANSYS实现斜齿轮的工程分析

The diagnosis method and simulation of bevel wheel contact fault

斜齿轮齿面接触型故障的仿真与诊断方法研究

Loaded tooth contact analysis of Spiral Bevel Gears Considering edge contact

考虑边缘接触的弧齿锥齿轮承载接触分析

The airflow field of the bevel edge wet desulfurization& dust catcher, designed by our experimental team, was simulated through the fluent software of the computational fluid dynamics ( CFD), where the calculation was based on k ε-equation model and SIMPLE algorithm.

对自行研制的斜板湿式除尘脱硫器，利用计算流体力学（CFD）中的fluent软件，选择k-ε模型和SIMPLE算法，对其内部气流流场进行数值模拟。

Airflow Field Simulation for Bevel Edge Wet Desulfurization and Dust Catcher

斜板湿式除尘脱硫器气流流场模拟

In designing the bit teeth, the teeth roots must be provided with bevel edge.

设计牙齿时必须把牙齿根部设计成有倒角的形式。

Clinical Observation on 34 Cases of Paralytic Vertical Strabismus Treated with Strabotomy

34例麻痹性垂直性斜视矫正术临床观察