Second, analyzing the principle of the solar panel and using the MATLAB software to build the simulation of the output characteristic for the solar cell under different temperature and isolation.

The power loss caused by the variation of the solar radiation transmittance and the solar cell ′ s temperature was calculated independently, and the total cell power loss computation model including the two factors was developed.

分别计算了电池板太阳光透射率和其工作温度变化引起输出功率的损失，建立了羽流污染导致太阳帆板电功率损失的计算模型。

Bonding Robot of Space Solar Cell Based on the Temperature Control

基于温度控制的空间太阳电池自动封装机器人

The analysis and amended measures of efficiency of solar cell influence by temperature

温度对太阳电池效率的影响及改善方法分析

It is possible for this Sort of concentrator Solar Cell made of cast polycrystalline Silicon to further cut down the cost of solar Cell power system, reaching RMB ￥ 20~ 25 Per Peak-watt soon.

用多晶硅材料试制成这种电池，有可能进一步降低系统成本，在近期达到20～25元/峰瓦。

The actualization of optimal power flow control of solar cell power system and the compensation of reactive power, harmonic distortion are discussed.

文中还讨论了太阳电池发电系统最佳功率流控制的实现方法以及补偿无功功率和谐波失真等问题。

The reducing design of solar cell power system

太阳能电池发电系统的简化设计

Optimal Power Flow Control of Solar Cell Power System

太阳电池发电系统的最佳功率流控制

The integrated demonstration system model of large solar array has been produced already. On the base of the sampler, the tests of deployment, main deployment mechanism mode, semi rigidity solar cell panel vibration and two dimension drive mechanism are carried out.

生产出了全尺寸的集成演示样机，进行了展开试验、主展开机构的模态试验，以及半刚性太阳电池板和二自由度驱动机构的振动试验。

As an n-type semiconductor material with direct and wide band gap, zinc oxide was widely used in transparent conductive glass, solar cell, flat panel display, gas sensors cell and other fields.

ZnO是一种直接宽禁带的n型半导体材料，已在透明导电玻璃、太阳能电池、平板显示器和气敏传感器等领域得到了广泛应用。

On the research of everyday output power of solar cell panel, experimental explore for serious research of photovoltaic power technique can be carried on.

通过对太阳电池方阵每天输出功率的研究，为长期进行太阳能光伏发电技术的研究做一些实验探索。

The average efficiency for encapsulated polysilicon solar cell in the module is 9.5%, the highest efficiency is 10.9%.

研制成的多晶硅太阳电池组件的平均效率为9.5%，最高达10.9%。

Engineers and decision makers for solar cell& module manufacturers, PV equipment venders, material suppliers, government officials and investors should attend this forum.

光伏制造企业决策人员及工程师，设备和材料供应商，光伏产业投资者，政府官员。

In the production of the solar cell module, the cells are usually connected in series and/ or in parallel to obtain a larger output power, so the differences in the performance of the solar cells will cause the deterioration of the module performance.

在制作太阳能电池组件时，通常将电池单元以串联后并联在一起以获得较大的输出功率，电池单元的性能差异将导致组件性能变坏。

The main works and conclusions are summary as follow: 1. The residual stress produced in the manufacturing process of solar cell module was investigated aimed at the three processes ( ingot casting, slicing and sintering) for solar cell production.

主要工作和结论如下：1、针对生产太阳电池片三道工序（铸锭、切片和烧结），开展太阳电池片制造过程的残余应力研究。

Stress distribution in the welding process of solar cell module was analyzed by using numerical simulation aimed to the problem in the welding process of solar cell module.

针对太阳电池组件焊接过程中存在的问题，运用数值模拟技术分析太阳电池组件焊接工艺中的应力分布情况。

PVB laminated silicon solar cell module

PVB层压硅太阳电池组件

Polycrystalline silicon solar cell module and encapsulation material

多晶硅太阳电池组件及封装材料的研究

Design and performance of the large area dye-sensitized solar cell module

大面积染料敏化太阳能电池的结构组件设计与性能测试

This result has an important reference value on the solar cell module design and manufacturing.

其研究结果对太阳电池组件的设计和制造具有重要参考价值。

By comparison, it is concluded that, using silicone can improve blue response of selective emitter solar cell module. In another word, using silicone can improve the quantum efficiency of module.

经比较得出，选择性发射极太阳电池组件使用密封剂silicone封装可提高其短波响应，即提高了量子效率。