The function and influence of Zeta-potential on coagulation of slime water

The experiment study the pyrolysis behaviors of coal slime and riverbed sludge using the method of liner warming.

实验采用线型升温的方法对煤泥水与河湖底泥共热解制氢特性进行了研究。

The flow pattern of pulp in currently used gravity slime concentrators except centrifugal separator belongs to laminar type.

现有矿泥重选设备，除离心选矿机外，矿浆流态都属层流。

Analysis on new slime separator ── cyclone column flotator

浅析一种新型煤泥分选设备&旋流器式浮选柱

Practice of floatation of anthracite slime by single feed separation

无烟煤煤泥单系统隔粗浮选的实践

The Preliminary Study on Coarse Slime Enhance Separation Using the Liquid-Solid Fluidized Bed

液固流化床高效分选粗煤泥初步研究

Based on large volume of operation and experiment data, analyses were made on the influence of particle size in coal flotation, the effective equipment for coarse slime separation and effective method for fine slime separation.

利用大量的生产和实验资料，分析了煤泥粒度对浮选的影响、粗煤泥分选的有效设备及细煤泥的分选方法。

The results show that this method can be used not only for ultrafine coal slime separation but also for super-clean coal production and desulfurization.

结果表明，该法既可对极细粒煤泥进行分选，又可制备洁净燃料，还可脱除单体解离的微细粒黄铁矿。

The overview of the slime separation technology and production characteristic

矿泥分选工艺及生产特点综述

The absorbing height loss of slime pump

砂石泵吸程损耗

Slime pulp is one of the common problems during the process of newsprint making from mechanical pulp, which unfavorably influences the quality of paper and its making process.

机械浆抄造新闻纸过程极易产生腐浆，对抄纸及成纸质量危害极大。

On the basis of production practice, the paper explores the causes of slime pulp, its influence and the optimized application and adding of bactericide.

本文结合生产实践就腐浆的产生、危害、杀菌剂优化使用、添加方面等问题进行了探讨。

Study and Application of The Technology of Slime Pulp Flocculation and Thickening in A Vertical Sand Bin

立式砂仓絮凝浓缩泥浆技术研究与应用

Control of slime pulp during paper making

纸机抄造过程中腐浆的控制

In view of the characteristics of the mine tailings slime pulp, tests for seeking the most suitable flocculant and the optimum dosages under different densities of the tailings lime pulp were made.

试验中，针对矿山尾泥浆的特性，寻求最适用的絮凝剂和尾泥浆各种浓度下的最佳用量。

Tailings slime pulp can be rapidly and directly flocculated and thickened in a vertical sand bin without building a thickening tank.

在不另建浓密池的情况下，利用立式砂仓直接进行尾泥浆快速絮凝浓缩。

De-watering of slime product could be by combination of screening and settling pond.

煤泥产品的脱水可采用筛分设备加沉淀池工艺。

The Study on "the Unidentified Biological Object" ( UBO)& The Experimental Observation of the Unusual Huge Slime Molds Compound Object

关于不明生物体的实验研究&特大型粘菌复合体的实验观察

Pattern Formation and Slime Molds.

模式形成与黏菌。

Using vacuum-evaporative pattern casting ( V-EPC) technology, the wear resistant surface cast iron can be gained by dipping the EPS model with the slime, casting and infiltrating the liquid iron to the slime layer.

采用真空实型铸造（V-EPC）法，在聚苯乙烯（EPS）泡沫模表面涂刷料浆，浇注后铁液渗入料浆涂层，得到表面耐磨铸铁。

Cooling systems properly treated with ozone will have no slime layer for scale particles to adhere.

冷却系统适当地由于新鲜的空气治疗将会为刻度粒子没有烂泥层附着。