Nitrate-N accumulation in soil profile increased with increasing of the N rate, but there was no linear relationship between accumulation and N rate, while irrigation rate and the interaction between irrigation and fertilization only affected in deeper layer of soil profiles ( 200-400 cm) significantly.

Surface and interfacial stresses are slightly affected by FeAl layer. Therefore, when choosing thick ceramic layer and thin Al layer, there are appropriate stress distributions at surface and interfaces, and the mechanical properties of coatings can be strengthened.

FeAl层对表面应力和界面应力影响较小.因此，当选择较厚陶瓷层和较薄铝层时，涂层内将具有较优的表面和界面应力分布状态，从而可提高涂层力学性能。

Results showed the type of ceramic layer's wears failure was affected by ceramic layer's thickness under this friction condition; while the ceramic layer would desquamate if its thickness was less than the critical numerical value.

结果显示：在滚动摩擦条件下，陶瓷层失效形式受到其厚度的影响，当陶瓷层厚度小于临界厚度时，试样表面出现陶瓷层剥落现象。

The various parameters metal particles transportation on the coaxial carrier-gas powder feeding affected the surfacing layer, s complex geometry and qualities greatly under the laser cladding process.

同轴气动送粉激光熔覆过程中，金属粉末落入熔池的速度、浓度的分布等物理参数对熔覆层的形貌有一定的影响。

Analyzed the PCM performances which affected by stickup layer's materials characteristic and its thickness under the application of FEM.

应用有限元法分析了粘贴层的材料性质和厚度尺寸对压电复合材料在实际应用中性能的影响规律。

Soil water content, water store and their range of variation increased with the amount of irrigation increasing, and affected soil deep layer.

灌水量越大，土壤含水量和贮水量越高，变化幅度越大且影响的土层越深。

The model as far as possible contained the parameters that affected granular layer filtration, and reflected the effect of dust deposition on collection efficiency and pressure loss.

该模型尽可能的包含了影响颗粒床过滤的参数，反映了沉积粉尘对过滤效率和压力损失的影响。

Machine-grinding affected the layer-structure of MMT and Na-MMT weakly;

机械研磨对原土和钠化土片层结构影响不大；

The structure of the affected surface layer caused by grinding and the hardness change are analysed.

对磨削造成的表面变质层的组织形态及硬度变化等进行了分析研究。

Examination and analys of the grinding affected layer of carburized and hardened gears

渗碳淬火齿轮磨削变质层的检测与分析

A white layer& wear affected layer is formed on the gearing surface of the automotive gear after failure.

汽车齿轮失效后，齿轮齿部啮合表面形成一个白色层&磨损变质层。

Ablation of Diamond Grain by Laser and Analysis of Its Affected Layer and Micro-crack

激光烧蚀金刚石磨粒及其变质层与微裂纹分析

Research on the Characteristics of the Affected Layer of Burnt Surface during Titanium Alloy Grinding

钛合金磨削烧伤表面变质层特性研究表面活性剂效用在微流系统中的变化

Study on the surface wear affected layer of the automotive gear

汽车齿轮表面磨损变质层研究

The ratios of microhardness to proof stress are all about 3.37 in different depths of the affected layer.

喷丸影响层不同部位的显微硬度与条件屈服点之比约为3.37；

They would rub and polish the apple to give a bright shine, to make it look tastier.

他们把苹果擦得鲜艳、锃亮，显得更加美味可口。

However, an alpha snapshot version can be downloaded from the Apache Derby Web site.

但现在可从Apache Derby网站下载一个alpha快照版。

While we were finishing up the AS6 release, development work had already begun on Jboss AS7 including an alpha version released to the community last October.

在发布AS6之后，JBoss AS7的开发工作也已经开始了，包括去年十月对社区发布的一个Alpha版。

Although it has been used internally at AsFusion for a long time, the Alpha version was just released recently.

尽管Mate在AsFusion内部已经使用了很长一段时间，但其Alpha版的发布却是刚刚不久的事情。

This is the real started point now and we really hope to move on an alpha version early in July, and then a beta in August.

现在就开始，我们很希望在7月早些时候发布一个Alpha版本，然后在8月发布Beta版本。

If you prefer C++, you can try the alpha version of the uClibc++ library.

如果您喜欢使用C++，那么可以试用一下uClibc++库的Alpha版本。