the cladded coating is uniform and continuous. the utilization ratio of the alloy powders is as high as 94%.

laser cladded ni-based alloy coating reinforced by wc particles has broad application due to its excellent wear-resistant property.

运用激光熔覆技术制备的WC颗粒增强Ni基合金涂层以优良的耐磨性能在当前得到了广泛应用。

macroscopic residual plastic deformation in explosion cladded sheets are discussed on the basis of a large amount of experimental data.

本文以大量实验数据讨论爆炸复合板的宏观残余塑性变形。

in vivo biocompatibility of the bioceramic coating cladded by laser

激光熔覆生物陶瓷涂层生物相容性体内研究

the experimental results show that the laser cladded layer of the specimen possesses higher hardness, wear and corrosion resistance.

试验结果表明，激光熔敷层具有较高的硬度和良好的耐磨抗蚀性能。

the important reason is the nanometer effect of nano-al_2o_3/ tio_2 introduced into the laser fast cladded coating.

主要是因为激光快速镀覆工艺及引入纳米材料的纳米效应的综合作用结果。

likelihood ratio identification method for the detection of adhesive state of the liner cladded in the rocket motors

火箭发动机包覆粘接状态检测似然比识别方法

binding strength between coating layer and the substrate cladded ni base alloy on the copper alloy by laser

铜基材料上激光熔覆镍基合金的结合强度

study on the properties and phase constitution of cobalt base alloy layer cladded by laser on the carbon steel surface

T8钢表面激光熔覆钴基硬面合金层的相组织与性能的研究

thermal fatigue properties of laser cladded imc coatings

激光熔覆IMC涂层的热疲劳性能

structure of laser cladded ni-based alloy coating.

镍合金激光熔覆层的组织结构分析。

processing and microstructure of laser cladded cu base composite coating on the surface of an al alloy

铝合金表面激光熔敷铜基复合材料涂层的工艺和组织

Study of laser cladded Co-based alloy/ SiC_p coatings on IF steel

IF钢表面激光熔覆Co基合金/SiC p涂层的研究

effects of aging on the fe-cu composite coating cladded by laser

时效对激光熔覆Fe-Cu复合涂层的影响

mechanism and control of the nick based alloy+ wc laser cladded layer microstructure

镍基合金+WC激光熔覆层的显微组织形成机理及控制

developing cladded rare earth wire feeding process to expand product variety of re treatment steel

开发结晶器喂稀土丝方法扩大稀土处理钢品种

the cross-section analytical model of the laser cladded coating by powder feeding method

送粉式激光熔覆层横截面面积的分析模型

the simulation of seismic explosive source residual deformation in explosion cladded material

地震爆炸震源模拟爆炸复合材料中的残余变形

effect of laser processing parameters on dilution of the cladded coating

激光工艺参数对熔覆层稀释率的影响

study on process of laser cladded nuclear valve parts

核阀零件激光熔覆工艺合理性研究

the african union has held countless meetings and conferences on how to increase trade between african countries. the united nations economic commission for africa has organized similar gatherings.

非盟已举办过无数次关于如何增进非洲国家间贸易的会议和会谈，联合国非洲经济委员会也组织过类似的会议。