acrylate的例句大全

New Synthesis Method of Tetradecyl Acrylate

丙烯酸十四酯合成新方法

Flocculation of kaolin suspensions using ternary polymerization flocculant ( CAS) synthesized by chitosan ( CTS), acrylamide and ethyl acrylate quaternary ammonium salt was investigated in lab-scale.

采用烧杯混凝实验研究了壳聚糖（CTS）、CTS与丙烯酰胺和丙烯酸乙酯季铵盐三元接枝共聚阳离子絮凝剂（CAS）对高岭土悬浊液的絮凝特性。

The effect of the proportions of polystyrene macromer ( PSt), butyl acrylate ( BA) and methyl methacrylate ( MMA) on graft efficiency during terpolymerization and the mechanical properties of the terpolymer were investigated.

考察了聚苯乙烯大单体（PSt）与丙烯酸丁酯（BA）及甲基丙烯酸甲酯（MMA）三元共聚时单体的比例对接枝效率及力学性能的影响。

Studies on Acrylate Thermoplastic Elastomer with Latex Interpenetrating Polymer Network Structure

乳液互穿网络型丙烯酸酯类热塑性弹性体的研究

High solid exterior wall latex coatings are prepared of acrylate emulsion, rutile titanium pigment and micro ground chalk, resulting in lower condensing ratio after dry and higher hiding power.

采用丙烯酸酯乳液做分散介质与金红石型钛白粉和超细重钙粉等配制的高固含量外墙乳胶漆，降低了涂料干燥后的收缩率，提高了涂料的遮盖力等。

Effect of the concentration and addition manner of NMA and HEA etc on the property of acrylate polymer film was discussed. And with the aid of GPC and the thermal analysis instrument ( DSC and TG) the major properties and characters of resin were discussed.

讨论了NMA的浓度、添加方式和交联时间等对改性树脂膜性能的影响，并利用玻璃化温度（Tg）和凝胶渗透色谱（GPC）进行了表征。

Study on the thermal curing behaviour of soap-free acrylate hydrosol

丙烯酸酯无皂水溶胶涂料热固化性能的研究

Determination of Methyl Acrylate in Ambient Air by Adsorption/ Thermal Desorption/ Gas Chromatography

吸附/热解吸/气相色谱法测定环境空气中的丙烯酸甲酯

A Study on the Change of Chemical Constitution of Acrylonitrile/ Diacetone Acrylamide/ Methyl Acrylate Copolymers during Thermal Stabilization by In-situ Infrared Spectroscopic Method

原位红外光谱法研究丙烯腈/二丙酮丙烯酰胺/丙烯酸甲酯共聚物热稳定化期间化学结构的变化

The low viscosity and good flexibility epoxy acrylate with different molecular weight and content was successfully prepared by firstly making modification of epoxy resin with maleic anhydride and polyethylene glycol monoester, and then modified epoxy resin react with acrylic acid.

采用马来酸聚乙二醇单酯对环氧树脂进行改性，然后用丙烯酸酯化，制得光固化涂料用一系列低黏度、柔韧性好的环氧丙烯酸酯。

Determination and application of reactivity ratio in copolymerization of acrylate and monomer A

丙烯酸酯第二单体A共聚竞聚率的测定及其应用

Reactivity ratio for acrylonitrile/ butyl acrylate concentrated emulsion copolymerization system

丙烯腈/丙烯酸丁酯浓乳液快速聚合的竞聚率

A kind of emulsion pressure sensitive adhesive with good heat and water resistance was prepared by using pre-emulsification seed polymerization and adding self-crosslinking monomer NMA and reactive emulsifying agent AMPS in acrylate.

采用预乳化种子聚合工艺，在多元丙烯酸酯中添加自交联功能单体N-羟甲基丙烯酰胺和反应型乳化剂2-丙烯酰胺基-2-甲基-丙基磺酸铵盐，研制出性能优异的耐热耐水型乳液压敏胶。

First, the acrylic acid reaction with the dicyclopentadiene dioxide generated the acrylate, then the nano-SiO2 particles of different quality which is treated by silane is dispersion to the system, composites are got through curing.

首先，以丙烯酸和二氧化双环戊二烯为原料，反应生成二氧化双环戊二烯丙烯酸酯，再把硅烷偶联剂处理过的不同质量的纳米Si02粒子分散到该体系中，固化制得复合材料。

Acrylate polymer emulsions are widely uesd in coatings, adhesives and so on because of their good lightfastness, acid-alkali resistance and corrosion resistance.

由于丙烯酸酯类聚合物乳液具有优良的耐光性、耐酸碱性和耐腐蚀性，而广泛应用于涂料、胶粘剂等。

Design Theory and Application of New Acrylate Emulsion Used for JS Waterproof Coating

新型丙烯酸酯乳液用于JS防水涂料的设计原理及应用

The marketing situation of crylic acid ( acrylate) both at home and abroad was discussed respectively and the application and market of crylic acid was prospected.

介绍了国内外丙烯酸（酯）市场现状，并对丙烯酸应用及市场进行了展望。

Methyl Acrylate yield of over 98% was obtained under the optimized reaction condition of methanol/ crylic acid ratio of 1.15:1 with with 5.56 wt% catalyst added in the alcohol and acid mixture and reaction time was 55 min.

最佳条件为：甲醇与丙烯酸的物质的量比为1.15∶1，催化剂用量为醇和酸总质量的5.56%，反应时间为55min，丙烯酸甲酯收率可达98%以上。

The monomers were butyl acrylate, 2-ethylhexyl acrylate, methyl methacrylate, crylic acid and so on. The polymerization was reacted at 69 ℃ for 6h. The coating weight of pressure-sensitive adhesive was 60g/ m2.

聚合单体为丙烯酸丁酯、丙烯酸-2-乙基己酯、甲基丙烯酸甲酯和丙烯酸，聚合温度为69℃，反应时间约为6h。压敏胶粘剂涂布量为60g/m2。

In this paper, a novel photosensitive silicone acrylate was synthesized from hydrogen-containing silicone fluid ( PHDS) and multifunctional organic acrylate ( TPGDA) by a very convenient route of the direct hydrosilylation, using chloroplatinic acid as the catalyst.

以含氢硅油和三缩丙二醇二丙烯酸酯（TPGDA）为原材料，氯铂酸为催化剂，采用硅氢加成方法直接合成了光敏性有机硅丙烯酸酯。