liquid surface的例句大全

A complex lab calculation process is needed to test the surface tension of the liquid.

溶液表面张力的测定需要一个复杂的实验测量计算过程.

What would be liquid on Titan, where surface temperatures are-180 degrees Celsius ?

究竟是什麽液体,能存在于 -180 的泰坦表面 呢 ?

With washing-up liquid as surface active agent, the effect is the best, the activity is higher than control by 12.4% when it's concentration is 0.5%.

表面活性剂以“奇强”洗洁精对提高纤维素酶活力作用最显著，用量为0.5%时酶活力比对照提高12.4%。

It's available for use of the experiments to determinate combustion heat, saturated vapor pressure, surface tension, and rate constant of reaction, draw binary phase diagram of liquid system.

本程序适用于燃烧热、饱和蒸气压、表面张力、反应速度常数的测定以及二元液系相图的绘制。

The modified technology improved the temperature field and fluid field of liquid steel in arc furnace, decreased the etch of bottom and gate of furnace and intensified the whirl of surface of liquid steel.

该项改进的技术改善了电弧炉内钢液温度场和流场，减少炉底和炉门局部侵蚀，加强钢水液面的旋转。

Discussion on Some Disputable Views about Micromechanism of Surface Tenson of Liquid

对液体表面张力的微观解释的几点商榷

Based on the research in the medium and strong polar glass capillary column, the coating on the barium sulfate micro crystal modified surface with apolar and weak polar liquid phase is investigated.

本文在中等极性和强极性玻璃毛细管柱研究的基础上，对弱极性和非极性固定液在硫酸钡微晶改性表面上的涂渍情况作了详细的研究。

The saturated steam pressure of liquid with arbitrary geometric curved surface

液面为任意几何曲面的液体饱和蒸汽压

Experimental Investigation of Oscillating Behaviors of Quartz Crystal Senors With Different Surface Roughness Under Liquid Phase

液体介质中不同表面粗糙度石英晶体传感器振荡行为的实验研究

The Safe Reliability of Surface Blemish for the Liquid Chlorine Steel Cylinder

液氯钢瓶表面缺陷的安全性分析

The Level-Set approach was adopted to deal with some factors such as deposited track, liquid/ vapor interface, which considered surface tension gradient ( the major driving forces for the melt flow), interface curvatures, buoyancy and convection heat loss.

通过水平集（level set）方法处理熔积轨迹、液/气界面等因素，考虑了熔体流动的主要驱动力表面张力梯度、表面曲率以及浮力等。

As the liquid core rate increases, concave deformations increased on the top and bottom surface of a rolled metal;

在有液芯存在时，轧件的上下表面向内凹陷，侧面易于形成单鼓变形，并且随液芯率的增大而增大；

On the other hand, Co binder gradient formed by liquid state carburizing is due to migration of W atoms driven by diffusion of carbon atoms, leading to coarser and closer WC grains in the surface and inward diffusion of Co atoms.

液相渗碳处理时钴相梯度结构形成主要是碳原子扩散驱动下的W原子迁移，导致表层碳化钨晶粒长大并相互靠近，从而使液态钴向合金内部迁移。

Two surface heat-treatment processes, liquid nitriding and sulfurizing, are used to compare with the current production process of liquid carburizing, with other variables remaining constant.

两种表面热处理液体渗氮及渗硫工艺与现行生产上原采用之液体渗炭淬火处理工艺，在尽量保持其他可变数不变的情状下加以比较。

The MHD effect on liquid metal free surface jet flows under magnetic field has been investigated.

分析了磁流体力学效应对液态金属自由表面射流稳定性的影响.

For example, evidence is mounting that liquid water may flow underneath the surface of Mars.

比如, 越来越多的证据表明火星地表下可能有水流.

The second, the permeation rate was decreased because the increased viscosity and surface tension formed a liquid membrane in the surface of dialysis bag to enlarge the unstirred layer and the concentration polarization phenomenon.

溶胶黏度和表面张力较大，能在介质表面形成液膜，增大了介质表面非搅动层的厚度和浓差极化现象，使透过速率下降；

The air is so thin that water cannot exist in liquid form on the surface.

空气很稀薄,水不能以液态形式存在其表面.

The solid-liquid interface moves away from the heat transfer surface , therefore, it makes phase change problem-linear.

由于相变过程中固液位置不断移动, 使得相变问题具有非线性的特征.

The adsorption of ethylenediamine dinitratc ( EDD) ammonium nitrate ( AN) eutectic liquid on RDX crystal surface were studied by testing the surface energy of RDX and the surface tension strength of EDD AN eutectic liquids with various surfactant.

通过RDX临界表面张力以及硝酸铵（AN）-乙二胺二硝酸盐（EDD）低共熔液（EA）的表面张力测定，研究了表面活性剂对AN-EDD低共熔液在RDX表面的润湿吸附性。