loading angle的例句大全

Therefore, loading rate and cutting angle have significant influence on tear strength.

加载速率和割口角度对撕裂强度有显著影响。

The experiment results show that composites with large braiding angle have complex crack forms under uniaxial tensile loading and the tensile stress-strain curves take on nonlinear characters.

实验数据表明：大编织角复合材料在单向拉伸作用下的破坏形式较为复杂，其应力-应变曲线呈现非线性特性。

Through comparison with three dimension single notch compact tension specimen, effect of inclined crack plane and different angle loading to SIF and SERR of crack tip is analyzed and summarized.

通过与三维单边直裂纹的紧凑拉伸试样进行比较，分析并总结倾斜裂纹面及复合加载对裂纹尖端应力强度因子和能量释放率的影响。

When the half central angle is small, the arch will freely vibrate about the position different from the original static one after the rectangular loading is finished.

对圆拱的分析表明，当中心角之半θ0较小时，矩形荷载作用完后圆拱在偏离原静止状态的位置附近自由振动。

The loading rates, wire cross-sectional sizes and thermal effects on the critical angle of copper NWs are discussed.

本部分首先分析了扭转速率、纳米线横截面尺寸以及温度等因素对临界扭转角的影响。

Strength analysis of lugs in any angle loading

任意角度受载的耳片强度分析

this testing machine is good at studying the deformation and failure of inhomogeneous and discontinuous media from the angle of loading equability.

该试验装置可以更好地从均匀加载的角度研究非均匀、非连续介质的变形及破坏规律。

It is found that inclined angle and loading position have an obvious affect on compression ultimate load-carrying capacity and failure mode.

研究结果表明，卷边弯起角度及荷载作用位置对试件的受压极限承载力和破坏模式影响显著。

In this experiment, some conditions, such as the strength of concrete, the area of angle steel, ends of the steel and modes of loading are considered, and the influence of them are analyzed.

本次试验从混凝土强度等级、粘钢面积、锚固情况和加载方式这几方面入手，研究了这些因素对加固效果的影响。

The variety of bowknot angle and dissipative angle with viscosity coefficient of pore fluid and cyclic loading frequency is consistent with the results of other experiments.

在同一岩石中蝴蝶结张角和耗散角随孔隙液体黏滞系数和加载频率的变化规律与以往其他实验的结果是一致的。

Larger loading rate leads to larger inclination angle of shear band in the middle of specimen.

随着加载速率的增加，岩石中部剪切带的倾角有增大的趋势。

Loading Process Analysis of the Outside Rolled Angle Consolidated Column

外包角钢加固柱受载全过程分析

Based on the beam loading theory in storage ring, traditional mode with large detuned angle and tuned mode of RF system in the injection process of Hefei light source ( HLS) were calculated and disadvantages of these two modes were analyzed.

根据储存环高频系统束流负载理论，研究计算了合肥光源注入过程中高频系统的大失谐角工作模式和调谐工作模式。

Misalignment Angle Calibration between SIMU and Gun Barrel Analysis on Meting Error of Quantitative Loading Technique of LPG and Error Removal

捷联惯组与炮管之间安装误差角的标定方法液化石油气定量装车计量误差分析及预防