scanning element的例句大全

Since the antenna under test and the probe are stationary and control of the phase of antenna element is only needed, the method is actually an electrical scanning approach substituting the traditional mechanical scanning.

由于使用该方法时要求被测天线和探头均固定不动，仅要求对天线各单元的配相进行控制，故实际上这是用电扫描方法来代替传统的机械扫描方法。

By means of in-situ tensile test of the specimen of bi-morphic alloys of γ-TiAl, observation upon its corresponding fracture surface with scanning electron microscope, and finite element computation, the tensile fracture mechanism of these alloys is investigated.

通过对双态组织的扫描电镜原位拉伸实验、相应的断裂表面观察以及有限元计算，研究了TiAl基合金双态组织拉伸的断裂机理。

[ conclusions] the finite element model of l4~ 5 spine can be established by ct scanning, digital processor and computer aided design, and used for further study on spinal biomechanics.

结论通过CT断层扫描、图像数字化处理及计算机辅助设计等方法，可以建立腰椎运动节段的有限元模型，用于脊柱生物力学的研究。

Then the structure and property of raw ore were studied by means of optical microscope, scanning electro-microscope, XRD, multi-elements analysis and chemical phase analysis.

并通过光学显微镜、扫描电镜、XRD图谱、化学多元素分析及化学物相分析等手段研究了原矿的结构及性质。

The phase composition, microstructure and the element of the thin film were characterized respectively with X-ray, scanning electron microscopy and EDAX.

通过x射线衍射仪、扫描电镜、能谱分析仪分别对（Ti，Al）N薄膜的相结构、微观形貌及薄膜成分进行了检测与表征。

The laser Omni-directional bar code scanner introduced here mainly consists of a holographic disk which as a plane optical element is to realize the laser beam deflection and focusing, as well as a series of mirrors designed for a scanning space.

本文介绍的激光多方位条码扫描器采用了全息光盘作为平面光学元件来实现激光束的扫描偏转和聚焦，设计了多面反射镜光学系统以形成多方位的空间扫描网。

considering the effect of the sound post and the bass bar, the acoustic characteristics of the violin have been studied using the finite element method and the laser vibrometer scanning ( lvs) system.

考虑音柱、低音梁对小提琴声学特性的影响，本文利用有限元数值方法和基于激光测振系统的试验方法分析了小提琴结构的动态特性。

conclusion the method to develop 3 d finite element model of implant in human maxillary complex by spiral ct scanning and ansys software was feasible and the results were satisfying.

结论借助螺旋CT扫描技术及ANSYS软件，建立上颌骨种植体模型是切实可行的，结果是满意的。

method: established a 3-d finite element model of| 567 and their supporting tissues by means of sct scanning technology and software of image processing and finite element analyzing program.

方法：利用螺旋CT扫描的方法，采用图像处理和有限元分析软件建立567及其支持组织的三维有限元模型。

Optical deflector is an important element of optical scanner, which determines the scanning performance.

摘要光束偏转器是光学扫描器中的重要组成部分,对扫描器的扫描效果起决定性的作用.