temperature efficiency的例句大全

Increasing turbine inlet gas temperature is one of important means to improve turbine efficiency and increase thrust-weight ratio.

提高涡轮前燃气温度是提高涡轮效率、增加推重比的重要手段之一。

The photocatalytic decolorizing efficiency of reactive dark blue was affected by some factors, such as dry temperature and time of films, irradiation time and light source and etc.

杂多酸盐/PVA复合物膜的烘干温度和烘干时间、光照时间、不同光源对活性深蓝的脱色降解均有影响。

The parametric analysis program of the temperature distributions in the reinforcement concrete component exposed to fire is developed base on APDL which is a Secondary development tool provided by ANSYS. The program can improve analysis efficiency of the temperature distributions in the reinforcement concrete component largely.

基于ANSYS提供的二次开发工具APDL，开发了火灾温度作用下钢筋混凝土构件内部温度场的参数化分析程序，能够大大提高钢筋混凝土构件温度场分析效率。

In this paper, the mathematical model for steady heat conduction of a circular shell casing is worked out and solved to obtain the formulae for its temperature distribution and fin efficiency at the tip surface and lateral surface. The dimensionless curves are also plotted for engineering calculation.

拟定薄壳圆套管稳态导热的数学模型，求解得出其端面和侧面的温度分布及肋效率计算公式，并绘制了无量纲曲线，供工程计算用。

The process of thermal chemistry om SO2 removal, with NH3 as well as the effect regulations of the humidity, NH3/ SOS2 mole ratio, the temperature on the collection efficiency of ammonium salts are discussed.

论述了加入NH3的热化学脱除硫过程，以及湿度、NH3/SO2摩尔比、温度对铵盐回收率的影响规律。

At the same time, the process of the thermal chemistry on SO2 removal with NH3 as well as the effect of humidity, NH3/ SO2 mol ratio and temperature on the collection efficiency of ammonium salts are discussed in the paper.

同时，讨论了加入NH3的热化学脱硫过程，以及温度、湿度、NH3／SO3摩尔比对铵盐回收率的影响规律。

Preparation of a Normal Temperature High Efficiency Cleaner for Aluminum Slices

常温高效铝翅片清洗剂的研制

Due to the special properties of semi solid metal, lower processing temperature compared to that of liquid metal and lower yield strength compared to that of solid metal, it provide a possibility for the thermal precise forming of metal with high efficiency and low consumption.

由于半固态金属具有特殊属性，即加工温度低（与液态加工比）、变形抗力小（与固态加工比），为高效、低耗实现金属热精密成形提供了一种现实可能。

The calculation analysis showed that, there was no linear relationship between thermal loss efficiency of vacuum tube and the ambient temperature difference, and the result of thermal loss efficiency could be closer to the actual according to the ambient temperature partition;

计算分析表明，真空管热损系数与吸热管和环境温差并非线性关系，将其关联式按环境温度分段整理将使计算结果更接近实际；

High temperature diffusion combustion mode should be adopted to attain relatively high thermal efficiency under low methanol concentration and low load.

低甲醇浓度下采用高温扩散燃烧模式可以实现低负荷较高的热效率。

Improving the operating efficiency of compressor set by decreasing the exhaust temperature of cracking gas compressor turbine

降低裂解气压缩机透平排汽温度提高机组运行效率

With steam as thermal source, it is big to have the product of heating surface, thermal efficiency high, heating even, heating time short just temperature easy control;

以蒸汽为热源，具有受热面积大、热效率高、加热均匀、加热时间短且温度容易控制；

The gasify media& air and steam are send to the gasify oven after the high temperature pre-heating process, which raised the thermal value of the partially gasified product and consequently the efficiency of the combined cycle generating system.

气化介质&空气和蒸汽经高温预热后送入气化炉，可以提高部分气化的煤气热值，提高联合循环发电系统的效率。

Using k-ε turbulence model and one step eddy-dissipation model, numerical studies on the reacting flow field of solid rocket ramjet with secondary air inlets were carried out. Influence of mass flow ratio on combustion efficiency and temperature field was analyzed.

采用k-ε湍流模型及单步涡扩散化学反应模型，对二次进气结构的固体冲压发动机补燃室的反应流场进行数值模拟，分析了二次进气流量比对燃烧效率与温度场分布的影响。

Photorefractive gratings are promising to be applied to wavelength division multiplexing ( WDM) systems and electro-optic integration due to the advantages of small size, simple structure, easy erasing, high diffraction efficiency, low temperature sensitivity, narrow band filtering and so on.

光折变光栅具有体积小、制作简单、易擦除、可以实时处理、衍射效率高、温度响应小、可以进行窄带滤波等优点，其在波分复用系统和光集成方面有着潜在的应用前景。

Researching the influence of temperature, reaction time, particle size, number of cycles and other factors on the carbonation and sulfation efficiency of calcium-based sorbents.

考察反应温度，反应时间，颗粒粒径及循环次数等因素对钙基吸收剂碳酸化特性和硫酸化特性的影响。

With addition of reaction rate equation, dependence of NO conversion efficiency on temperature, space velocity and different NH3/ NO rate are studied.

并在反应模型的基础上，加入SCR反应速率方程。计算分析了不同温度、空速、不同NH3/NO对催化器转化速率的影响。

Influence of different auxiliary pulses on properties of the color plasma display panel ( PDP), including its luminance, its luminance efficiency, its power, its white color balance, and its color temperature, was studied.

为提高彩色等离子体显示器（PDP）的性能，研究了维持期辅助脉冲对PDP的亮度、亮度效能、功耗、白平衡、色温等参数的影响。

Oxygen smelting experience is hardly probed on the No. 1 blast furnace and multi smelting efficiency on improving the output of pig iron, the theoretical tuyere combustion temperature and calorific value of gas and reduction of pig iron cost etc have been achieved.

天铁1高炉努力探索富氧冶炼经验，取得提高生铁产量、风口理论燃烧温度及煤气发热值，降低生铁成本等多项冶炼效果。在操作上采取新的操作方针，获得了良好指标。

Test of Motor Locked Rotor Temperature Rise and System Efficiency for XL Pure Electro-motion Car

夏利纯电动轿车电机堵转温升及系统效率测试