warping的例句大全

A model test was designed to simulate the consolidation process of warping soil, the validity of theoretical equation and the solution methods presented in this study.

设计模型试验模拟渗压作用下淤填粘土的固结过程并对本文建立的理论模型和求解结果进行验证。

The shallow faults are the result of extensional fracturing of the overlying strata due to lateral compressional warping deformation ( longitudinal buckle deformation) of the basement ( pre-Mesozoic tectonic layer) in the north of the Tabei uplift in the stage of the Kuqa regenerated foreland basin.

浅层断裂是库车再生前陆盆地阶段塔北隆起北部基底（前中生界构造层）受水平挤压翘曲变形（纵弯变形）导致上覆岩层引张破裂的结果。

Analysis of the Effects of Temperature Warping Deformation on Base

路面板温度翘曲变形对基层的作用分析

Temperature warping and warping related stress of cement concrete pavement

水泥砼路面的温度翘曲与翘曲复合应力

In the end relationship between temperature warping stress and engineering economy is pointed out in order to instruct practice.

指出应正确衡量温度应力与经济的关系，从而能做出最佳选择。

The stress of base structure is analyzed by3-D FEM under the action of temperature warping deformation and coupling with vehicular load.

方法结合试验路温度场监测数据，采用三维有限元法对基层结构在温度翘曲变形及与车辆荷载耦合作用下的受力特性进行分析。

After the analysises above, it found the size effect laws on both load stress and temperature warping stress, as well as laws of stress reduction effect of dowel bars and collars on plates with 4 free edges.

经分析，得出了四边自由的路面板荷载应力和温度翘曲应力的尺寸效应规律，以及传力杆或水平拉杆对非自由板的应力折减作用。

Sizing efficiency can reach above 85% and loom efficiency can reach 82% by innovating tension area of warping process, adjusting sizing processing route and size formula, innovating sizing method and reed-in method.

通过改进整经工序张力区域划分、调整浆纱工艺路线和浆料配方、改进浆纱及穿筘操作方法，使浆纱好轴率提高到85%以上，织机效率达到82%左右。

This paper introduces a good many factors influencing the moisture-free weight per unit area of warp knitted fabric, measures and theoretically analyzes the fineness of raw material, warping tension, loop length, thermal setting, and so on.

介绍了影响经编织物干克重的诸多因素。对原料细度、整经张力、线圈长度及热定形等影响因素进行了实际测试和理论分析。

Arranging cheese reasonably, set suitable tension washer weight should be adopted in warping process.

整经工序要合理排放筒子，并合理设置张力垫圈重量；

And then reduced model is founded, warping deformation of variant bracing diaphragms and sheet metals at optima laying angle are surveyed, finally the process to upraise the rapid prototyping precision of the thin shell parts is set up.

建立简化模型，在最优摆放角度条件下，研究了不同支撑的薄片和薄板的翘曲变形，提出了提高薄壳零件快速成型精度的工艺。

The stress and deformation of thin-wall beam formed structure is calculated by "movable coordinate method" of warping theory on computer. By comparison with the classical theory of thin-wall structure, it is proved that the new theory is correct and the results are credible.

对翘曲理论中计算薄壁构件空间变形应力和位移的“动态坐标法”进行了大量的计算机扫描验证，并与传统薄壁构件计算理论相比较，证明该方法是正确的，结果是可靠的。

Coupling bending-Torsional Vibration of Bernoulli-Euler thin-walled beam including warping effect

考虑翘曲影响的Bernoulli-Euler薄壁梁的弯扭耦合振动

Research on Cross-section Warping Coursed by Distortion of the Linear Elastic Thin-walled Beam Based on Generalized Beam Theory

基于广义梁理论（GBT）的线弹性薄壁梁考虑截面畸变的翘曲研究

Analysis of local warping and torsional rigidity of spot-welded thin-walled box section beam with different wall thickness

异壁厚点焊箱形截面薄壁梁的局部翘曲和扭转刚度分析

After a study on this hypothesized spring beam, a method for analyzing warping torsion on spot-welded thin-walled box section beam has been presented.

通过对这种具有假想弹簧的半闭口截面构件的研究，提出了一种分析点焊箱型截面薄壁构件的翘曲扭转的新方法。

Based on the fundamental theory of warping torsion on spot-welded thin-walled box section beam, the characteristic of torsion distortion for a beam with concentrated load on the middle and with uniformly distributed load along the beam are studied.

基于点焊薄壁构件翘曲扭转理论，分析和研究点焊双帽箱型横截面薄壁构件中部有集中载荷和整个构件长度上有均匀分布载荷作用时的扭转变形特性。

A model for its static and dynamic analysis of a large deformation spatial beam is developed, based on the virtual work increment equation for three-dimensional continuum, considering effect of shearing and warping deformations.

以三维连续体增量虚功原理为基础，建立了空间大挠度梁考虑剪切影响的静态分析模型和动态特性分析模型；

Data Mining Based on Segmented Time Warping Distance in Time Series Database

基于分段时间弯曲距离的时间序列挖掘

Novel Algorithm for Time Series Data Mining Based on Dynamic Time Warping

基于动态时间弯曲的时序数据聚类算法的研究