yield limit的例句大全

Mises yield condition and imitate moment yield limit with an exponent curve. Taken advantage of DKT plate element and a kind of compatible quadratic plane element including vertex rotations, an ideal shell element is formed.

Mises屈服条件，并对弯矩屈服极限用一指数曲线模拟，利用DKT板元和一种带有角点转角自由度的相容二次平面元来组成一种理想的平壳元。

The lap joint produces bending effect under the action of tensile load and the bending degree decreases with the increase of yield limit of base material.

搭接接头在拉伸载荷作用下会产生折弯效应，折弯程度随被钎焊母材屈服极限的增加而减小。

A microcomputer testing system composed of a WG-10A tensile testing machine and a TP& 801B microcomputer is designed to measure the elasticity module and the yield limit, etc. The System has functions of electronic tensile, and automatic data collecting, processing, displaying and printing.

本文介绍WJ10A型材料试验机与TP801B单板微型计算机组成对弹性模数E及屈服极限б（0.2）等测试系统，该系统具有电子拉伸以及自动数据采集、处理、显示与打印的功能。

During the production of casing, it will give birth to residual stress. This kind of residual stress will decrease the tensile yield limit and compressive yield limit of casing greatly.

在套管的生产过程中会产生残余应力，这种残余应力将大大降低套管的拉伸屈服极限及压缩屈服极限，进而降低套管的抗挤强度。

The stress in thread head and the root of first engaged tooth on tail beyond yield limit.

螺纹端部和尾部第1啮合齿的根部已进入屈服区。

Through the repeat impact test of coating workpieces and comparison between the changes of coating and base thickness under different impact times, it is finded that under impact stress even less than yield limit, material of workpieces appeared macroscopical plastic deformation.

通过对带涂层试样的多冲试验，对不同冲击次数下涂层和基体的厚度变化进行对比，发现即使在低于材料屈服极限的冲击应力下，材料也会产生宏观塑性变形。

The stress in primary support is very large especially in profiled bar steel frame, the inner and outside edge of steel frame are in stress condition and most steel frame stresses exceed steel yield limit, the steel stress in unstable condition;

初期支护受力很大，特别是钢架内、外缘均处于受压状态，而且钢架大部分均超过钢材的屈服极限，钢架处于失稳状态；

The phase yield limit increases with the test temperature increasing;

对于不同实验温度，Ni-Ti形状记忆合金的变形行为也不同，其相变屈服应力随着实验温度的增加而增加；

Investigation of the limit load of circular plate with the method of weighted residuals under Mises yield condition;

而后根据极限状态的原始定义，利用有限元法求出极限载荷的精确结果。

The limit analysis of the spherical shallow shell of the rectangle base by TTE Mises yield criterion

用Mises屈服准则对矩形底球扁壳进行极限分析

The low availability of phosphorus in soils is a major yield-limiting factor in rice production.

土壤中有效磷缺乏是制约水稻生产的主要因素之一.

The aim is to obtain a high yield strength, elastic limit and high toughness.

其目的是获得高的屈服强度，弹性极限和较高的韧性。

Commercial banks tend to be optimistic in expected yield lower limit.

各类商业银行在预期收益率下限方面具有乐观预测倾向。

by assuming linear variation of nodal variables, the formulation of limit analysis on collapse loads and factor of safety leads to an optimization problem with a large number of cone-shaped yield restrictions.

通过单元节点变量的线性化假设，破坏荷载和稳定系数的极限分析下限问题最终归纳为带有大量锥形约束的优化问题。

The characteristics and control techniques of plastic canopy microenvironment were found out and grasped, the seedling raising microenvironment management was strengthened, the seedling raising time limit was shortened, and the seedling yield and quality were raised to realize the industrial seedling raising.

摘要了解和掌握塑料大棚微环境特点及调控技术，加强育苗微环境管理，缩短育苗期限，提高苗木产量质量，以实现工厂化育苗。

These factors in the near future there will be no fundamental change, will limit the total assets of China's banking yield level.

上述因素在近期内不会有根本性的改变，仍将限制我国银行的总资产收益率水平。

In order to avoid such a failure, an empirical model in terms of four process parameters, namely sheet thickness, step size, wall angle and yield stress, was developed to compute the minimum safe limit of tool radius.

为了避免这种失效，本论文中提出了一个以板厚、加工步长、成形角和屈服应力为变量的经验公式，以计算工具头半径的最小值。

elastic limit, yeung''s module of elasticity to yield point

弹性限度、阳氏弹性系数及屈服点

to limit the total yield of fishing. to analyze the feasibility of implement of the total allowable catch ( tac) in zhejiang province.

二是限制捕捞总量，对浙江省实施总可捕量（TAC）制度的可行性分析；

Although these methods can get a better reaction yield, but the reaction itself, often because of the use of expensive catalysts or reaction conditions is stringent or more complex post-processing and other reasons, limit their further application in organic synthesis.

虽然这些反应方法都能得到较好的反应收率，但在反应本身常常因为使用了昂贵的催化剂或是反应条件较为苛刻或是后处理较为繁杂等原因限制了它们在有机合成中的进一步应用。