Bulk的例句大全

In addition, the structure of catalysts in bulk before and after reaction as well as the thermal weight loss of used catalyst was characterized by means of XRD, IR and TG-DTA techniques.

另外，采用XRD、IR和TG-DTA技术表征了催化剂反应前后的体相结构以及热失重过程。

The flow velocity got by traditional molecular dynamics method is the average value of bulk flow velocity and the molecules' thermal motion over time. This method only can apply in the case of high speed flow problems.

传统的分子动力学方法是把流速与，分子热运动速度之和在一个长时间段上取平均值，这种方法只在流速相当大的情况下适用。

For low speed flow problems, because of the highly nonlinear coupling of the low bulk flow velocity and the high velocity of molecules' thermal motion, and usually over-estimate the true flow velocity in such cases and lose its authenticity.

对于低速流动问题，由于较低的流动速度和较高的分子热运动速度的非线性耦合，流体的流速被大大地高估，失去其真实性。

A study on kinetics of bulk thermal polymerization of styrene

苯乙烯热引发本体聚合的动力学研究1转化率与时间的关系

Kinetics of bulk thermal polymerization of styrene with ethylbenzene

苯乙烯热引发本体聚合动力学

The kinetics for bulk thermal polymerization of styrene ( St) at higher conversion within temperature range of 100-200 ℃ has been studied based on Three Stage Polymerization Model ( TSPM) which is proposed by our previous paper.

基于三段聚合模型（TSPM），研究了100&200℃苯乙烯（St）热引发本体聚合。

Researches on the Thermal Property of Bulk Stretch Real Silk

膨体弹力真丝的热性能研究

High impact polystyrene ( HIPS) with antibacterial activity was prepared by means of mechanically blending and thermal-initiated bulk polymerization, and their antibacterial activities were measured and analyzed via quantitative and qualitative tests.

采用机械共混法和热本体聚合法制备抗菌型高抗冲PS（HIPS），通过定性和定量试验对抗菌型HIPS的抗菌活性进行了测定与分析。

The MIPs has been successfully applied to the determination of naringenin in the Chinese traditional medicine with good results. ( 3) Molecular imprinted polymers were prepared using 4-chlorophenoxyacetic acid ( 4-CPA) as template molecules by thermal-initiated bulk polymerization method.

对传统中药中的柚皮素成分进行了检测，结果令人满意。（3）以对氯苯氧乙酸为模板分子，采用热引发本体聚合法合成了分子印迹聚合物。

Cordierite ( MAS) and MAS/ SiC multiphase material were prepared, and then the multiphase material's bulk density, open porosity, flexural strength and thermal-shock resistance were measured.

合成堇青石（MAS）并制备MAS/SiC复相材料，测试了复相材料的体积密度、开口气孔率及抗热震性等。

Thermally activated flux creep in a bismuth based bulk material

Bi系块材中的热激活引起的磁通蠕动

It is concluded that high efficiency packing column can obtain much greater mixing effect and mass transfer efficiency, compared to bulk column and plate column, optimization of mass transfer equipment is one of key factors to increase LPG's amine absorption efficiency.

并得出高效填料塔比乱堆填料塔和板式塔可获得更大的混合效果和传质效率，传质设备的优化选择是提高LPC胺吸收效率的关键因素之一。

Excitation Energy of the Bulk Polaron in a Polyatomic Crystals

多原子晶体中体极化子的激发能量

The rarefied was used as transfer agent for the RAFT polymerization of MMA and St in bulk and toluene, the polymerizations were found with living characters.

利用合成的二硫代苯甲酸苯乙基酯为链转移剂，成功实现了MMA和St在本体及甲苯中的RAFT活性自由基聚合，结果表明均有较为明显的活性聚合特征。

Determination and Application of the Bulk Reaction Rate Coefficient for Water Quality Modeling in Water Distribution System

供水管网水质模型主体水反应系数的确定及应用

Preparation of bulk Al_3Ti/ Al nanocomposite by high-energy ball milling and in-situ reaction sintering

高能球磨制备Al3Ti/Al块体纳米晶复合材料

Erosion Resistance of AgSnO_2 Electric Contact Materials Sintered Bulk by Reactive Synthesis on the Effect of Laser Scanning

反应合成AgSnO2电接触材料在激光束作用下的抗熔蚀性

The coking test was made on coal sample with the same blending ratio and different bulk densities, the relationships between coke abrasion strength, crushing strength, apparent porosity, coke reactivity index, coke strength after reaction and charging bulk density were obtained.

采用同一配煤比和不同的装煤堆密度煤样进行炼焦试验，得出焦炭的耐磨强度、抗碎强度、显气孔率、焦炭的反应性、反应后强度与装煤堆密度的关系。

Confronting with problems such as low bulk density of sPP and reactor fouling, it has been emphasized that the studies of reaction engineering focused on developing an optimal process for catalyst support and special polymerization process are very important.

强调要实现sPP的工业化，尚需从聚合反应工程的角度，加强催化剂负载和聚合工艺的研究。

Local governments have also introduced the relevant documents requested in the construction project, you should use ready-mixed concrete and bulk cement, ready-mix concrete strongly encouraged and supported, and with the corresponding concrete production equipment, ie, concrete mixing station.

各地政府也纷纷出台了相关文件，要求在建设工程项目中，应使用预拌混凝土和散装水泥，大力鼓励和支持预拌混凝土，并且配备相对应的混凝土生产设备，也即混凝土搅拌站。