CONE的例句大全

Research on the Feature Recognition System for Three-cone Bit

三牙轮钻头特征识别系统的研究与开发

CAD System Design for Three-cone Bit Based on AutoCAD

基于AutoCAD的三牙轮钻头CAD系统设计

Simulation model of drilling process of three-cone bit

三牙轮钻头破岩过程计算机仿真模型

Analytic expression for scoop-shaped tooth surface of three-cone bit and its integration processing

三牙轮钻头瓢形齿齿面结构的空间解析式及积分处理

The paper gets a conclusion that the patterns of breaking rock are not only concerned with the pressure of three-cone bit but also relating to the rotating speed of the bit.

得出了钻机的破岩形态不仅与轴压有关，而且还与钻机的转速有关的结论。

This paper introduced the application of new Hall sensor in the voltage and current regulation of the speed-regulation system of rotary three-cone bit drill and analyzed the mode of operation, the structural characteristic and the use result of the component element.

文章介绍了在牙轮钻机调速系统的电压、电流调节中，采用了新型霍尔元件，并具体分析了其工作方式、构成特性以及使用效果。

The ideas and the process of the development of three-cone bit CAD system based on AutoCAD with AutoCAD embedded VBA language are represented. The common method of developing three-cone bit CAD system in the environment of AutoCAD is illustrated.

阐述了采用内嵌于AutoCAD的VBA语言开发基于AutoCAD的三牙轮钻头计算机辅助设计系统的思想和实现，及在AutoCAD环境下开发三牙轮钻头CAD系统的一般方法。

The Study of Formability of Thrust Cone Forging

推力锥锻件成形性研究

ST bumper used to resist shock is a pivotal part in railway vehicle transportation. As primary load-transfer component of this part, thrust cone required very high precision and surface quality.

ST型缓冲器是铁路车辆运输过程中用于抗冲击的关键部件，推力锥作为其中的主要传力零件，其精度和表面质量要求都非常高。

The quality of thrust cone directly affected the stability and security of the startup and function of rail vehicle. Quality and performance of the product play an important part in developing of implement "heavy load, velocity rise and security" to railway van.

推力锥的质量优劣将直接影响到铁路货车启动和运行过程的稳定性和安全性，其产品质量和性能对铁路货车实施重载、提速、安全的发展将起到重要的作用。

A static analysis of the No. 2 leg-cone of a tricone bit is conducted by the finite element method, and the distribution pattern of the contact stress on the leg journal and thrust surface with different bearing clearances is worked out.

用有限元法对某型三牙轮钻头的2号牙轮－牙爪进行了静力计算，求得不同轴承间隙时牙爪轴颈及止推面上的接触应力分布规律。

The Effects of the Extendible Exit Cone on Stability of the Thrust Vector Control System

可延伸出口锥对推力向量控制系统稳定性的影响

The effects of the extendible exit cone on stability of the thrust vector control system of largescale solid rocket motor are presented and the measures for improving the system stability are suggested.

介绍了喷管可延伸出口锥对大型固体火箭发动机推力向量控制系统稳定性的影响，并提出了改善其系统稳定性的措施。

Wrap the hair around your thumb and twist it up into a cone shape, holding it secure with your other fingers.

将头发围着大拇指盘起来形成一个圆锥形，握紧。

While holding down on the cone, tighten the subbase screws.

用手压住漏斗，拧紧座垫固定螺丝。

To provide a theoretical basis for the conical stylus cone angle selection. ( 2) Analysis of the stylus tip radius and the stylus static pressure causing timber roughness parameter measurement error, calculation of the roughness measurement error value caused by the different tip radius.

分析触针针尖圆角半径和触针静压力引起的木材粗糙度测量误差，计算不同针尖半径造成的粗糙度测量误差值。

The plate cone reticulated shell is analyzed on seismic responses with mode decomposition response spectrum and time history analysis method, some important conclusions are obtained for practical design.

分别采用振型分解反应谱法和时程分析法对板锥网壳结构进行了地震响应分析，得出了可应用于工程实践的重要结论。

The Analysis of the Trace Formed by Cylinder and Cone Deceleration-time of penetration of cone-shaped projectile

圆柱与圆锥斜交时交线形状的分析

Tubes and pipes of the foregoing cross-sections may be polished, coated, bent, threaded, drilled, waisted, expanded, cone-shaped or fitted with flanges, collars or rings.

上述截面的管子可经抛光、涂层、弯曲、攻丝、钻孔、缩腰、胀口、成锥形或装法兰、颈圈或套环。

Analysis of the Tip Temperature of Cone Field Emitters

锥形场发射体尖端温度的分析