Coated的例句大全

Progress and Application Status of CVD Diamond Thick Film Coated Tools

CVD金刚石厚膜刀具的研究进展与应用现状

Kiosks on L'Estaque's main street sell local specialties: chichi fr é gi, fried dough with a hint of crushed black pepper inside and coated in coarse sugar, and panisses, chickpea flour fritters.

埃斯塔克大街上的售货亭供应各种本地特产：香酥炸糕，即炸面团里加少许压碎的黑椒粉，表面裹上粗糙的糖粒，还有鹰嘴豆馅的炸糕。

Rapid Detection of Proteus. Vulgaris with a Piezoelectric Quartz Crystal Sensor Coated with Thin Liquid Film

压电石英液膜传感器对普通变形杆菌的快速测定

Alkyd paints prepared by the two calcium ion exchanged pigments were coated on the thin steel plate, the performance of the coating in 3% NaCl solution was tested.

将制备的两种钙离子交换颜料配制成醇酸树脂涂料，涂覆在普通薄钢板上，进行耐盐水试验，在3%的NaCl溶液中检测该涂料的防腐性能。

Have all the joints been coated with thread compound.

所有接头都要涂上螺纹脂了吗？

enameled and epoxy coated cast iron and pvc plastic sanitary floor sinks

上釉和环氧树脂涂覆铸铁和pvc塑料卫生楼板洗池

Establishment of time-resolved fluoroimmunoassay for estriol based on solid phase coated antibody competitive mode

基于固相抗体竞争模式时间分辨荧光免疫分析测定雌三醇

Preparation of Coated Graphite Tubes and Determination of Tin in Aluminium Alloys by Graphite Furnace-Atomic Absorption Spectrometry

涂层石墨管的制备和应用&铝合金中锡的测定

Separately adopted carbide and TiN coated carbide to machine aluminum alloy and stainless steel, a series of turn-milling tool wear experiments had been done on a turn-milling machining center to analyze the tool wear and fracture.

在车铣加工中心上，分别采用硬质合金和TiN涂层硬质合金刀片，对铝合金和不锈钢工件进行了车铣加工的刀具磨损试验，研究分析了车铣刀具的磨损和破损特征。

Tubes and pipes of the foregoing cross-sections may be polished, coated, bent, threaded, drilled, waisted, expanded, cone-shaped or fitted with flanges, collars or rings.

上述截面的管子可经抛光、涂层、弯曲、攻丝、钻孔、缩腰、胀口、成锥形或装法兰、颈圈或套环。

Tin coated sheet ( strip)& Tin coating mass testing method

GB/T1838-1995镀锡钢板（带）镀锡量试验方法

Preparation and Characterization of the Electromagnetic Sheilding Fabric Coated with Tin-Nickel Alloys on Pet Fiber

电沉积锡镍合金电磁屏蔽织物的制备及其性能研究

The wear mechnisms of coated cutting tools mainly are flank wear and abrasive wear, accompany with adhesive wear, oxidation wear and breakage of the tool tip/ cutting edge.

涂层铣刀磨损方式主要是后刀面磨损和磨粒磨损，伴随着粘接磨损，氧化磨损以及刀尖和刀刃的破损。

The effect of TiC coating in electrode tip surface on spheriform electrode degradation during resistance spot welding zinc coated steel was investigated by SEM, EDX and XRD.

利用SEM、EDX和XRD等方法分析了在点焊镀锌钢板时球形电极表面熔敷TiC涂层对电极失效的影响。

The results show that electrode degradation mechanism was basically caused by wear due to fracture of local welding between the electrode tip surface and zinc coated sheet steel happen at electrode surface and alloying between electrode and zinc on zinc coated steel during resistance spot welding zinc coated steel.

结果表明：点焊镀锌钢板时电极的失效机制主要是电极和镀锌板之间局部焊接的断裂发生在电极表面而导致的电极磨损以及电极和镀锌板表面的锌之间的合金化。

The heterogeneous precipitation-thermal reduction process was applied to preparation of metal coated titanium carbonitride composite powders for the first time in this paper.

本研究首次将非均相沉淀&热还原法应用于制备金属包覆碳氮化钛复合粉末。

The pulp of titanium hydride powder was coated on the cleaned steel substrate, then heated in vacuum for desorption of hydrogen and sintered at high temperature in argon atmosphere for forming Ti-Fe alloy coating.

将氢化钛粉浆液涂敷在经净化处理的钢基体上，经真空加热脱氢，充氩高温烧结制备出钛铁合金涂层。

All specimens were ground and polished to simulate clinical conditions. Then six specimens of each alloy were selected randomly and coated with a thickness of 2.5 μ m titanium nitride coating ( TiN) on the surfaces by multi arc technique.

随机选择Ni-Cr、Co-Cr合金试件各6个，采用多弧离子镀法分别在其表面上沉积一层厚为2.5μm的氮化钛涂层（TiN）形成TiN/Ni-Cr、TiN/Co-Cr复合体。

Principle of production technology and development trend of coated titanium pigment

包核钛白颜料生产的技术原理及发展方向

Preparation and Characterization of the Mica Titanium Optical Interferential Pigment Coated by Nd_2O_3

氧化钕改性云母钛光干涉颜料的制备及表征