Cr的例句大全

The trend of new technique for manufacturing Ni-Cr alloy thin film with a combination of characteristics: high resistivity, low temperature coefficient of resistance ( CR), large gauge factor, and good thermal stability is presented.

阐明了制备具有高电阻率、低电阻温度系数、高应变灵敏系数、良好的热稳定性等优异综合性能的镍铬合金薄膜的新工艺发展趋势。

For high nitrogen Cr Si Ni N films in comparison with low nitrogen Cr Si Ni N films, the variation of electrical resistance was smaller during the heat treatment, and the higher annealing temperatures was needed to obtain a small temperature coefficient of resistance ( TCR).

与低氮含量Cr Si Ni N薄膜相比，高氮含量Cr Si Ni N薄膜的电阻值在热处理过程中变化较小、欲获得较小电阻温度系数（TCR）需要更高的退火温度。

A new phase transformation model was proposed considering the low temperature expansion during the cooling stage of welding of Cr-Mo steel pipe.

提出了考虑焊接冷却过程Cr-Mo低温膨胀现象的相变模型。

The characteristics of fluorescence material absorption and emission are analyzed, and the optic-fiber temperature measurement probe based on Cr ∶ LiSAF is developed.

分析了系统荧光材料的吸收和发射特性，研制了Cr∶LiSAF的光纤测温探头。

The room temperature section of the phase equilibrium diagram of the Al-Cr-Cu ternary system has been investigated by means of X-ray powder diffraction method.

本文用X射线粉末衍射法研究了Al-Cr-Cu三元合金系相图的室温截面。

Abrasion wear test of Fe-20% Cr ahoy with carbon content ranging from 0.82% to 2.94% was conducted at 800 ℃ in a self-made high temperature wear tester. The worn surfaces and subsurfaces were observed by SEM.

本文用自制的高温磨损试验机对碳含量0.82～2.94%的Fe-20%Cr合金进行了800℃下的高温磨损试验，并用扫描电镜观察了磨损面和磨损面亚表面的情况。

Objective: To evaluate the clinical effect of galvano-ceramic bridges made by Ni-Cr pontic fired bonding galvano caps with highly temperature-resistant adhesive based on three-year clinical trials.

目的：观察金沉积基底冠熔结镍铬桥体烤瓷桥的临床修复效果，为临床利用金沉积技术制作烤瓷桥修复提供参考。

Quenching Hardness Calculation and Tempering Hardness Characteristic of Cr-W-Mo-V Medium-alloy Steel

Cr-W-Mo-V中合金钢的淬火硬度计算及其回火硬度特性

The changes of quenching and tempering hardness and the microstructure transformation of four kinds of Cr-W-Mo-V medium-alloy steels were investigated.

研究了4种不同成分的Cr-W-Mo-V中合金钢的淬火硬度、回火硬度变化和组织结构转变。

Effect of Tempering Temperature on Structures and Properties of Ni-Cr-Al Hard Elastic Alloys

回火温度对Ni－Cr－Al硬弹合金组织和性能的影响

Influence of Tempering Temperature on Thermal Fatigue Behavior of Cr-W Alloy White Cast Iron

回火温度对Cr-W合金白口铸铁热疲劳行为的影响

Resistance to softening, the effects of alloy elements and microstructures of Cu-0.1% Ag-0.06% Ce and Cu-0.1% Ag-0.1% Cr alloys were analyzed and compared with Cu-0.1% Ag alloy, by using hardometer, electronic tensile testing machine, optical microscope and TEM, etc.

采用显微硬度计、电子拉伸试验机、光学显微镜和TEM等，通过与Cu-0.1%Ag合金对比，分析了Cu-0.1%Ag-0.06%Ce合金和Cu-0.1%Ag-0.1%Cr合金的抗软化性能、合金元素的作用及组织形貌特征。

Effects of In Content on the Microstructure of Cu-Cr-In Ternary Alloy

In含量对Cu-Cr-In三元合金组织的影响

Structure of Electroless Ni-Cr-P Ternary Alloy Deposit

Ni-Cr-P三元合金化学镀层的组织结构

The joint was analyzed by EDS and the ternary phase diagram for Fe-Cr-Ti. The results indicated the presence of σ, Fe_2Ti, FeTi and β-Ti in the reaction zone between stainless steel and titanium alloy.

对接头进行了能谱分析，结合Fe-Cr-Ti三元相图发现，钛合金与不锈钢之间的反应区内依次形成了σ、Fe2Ti、FeTi和β-Ti层。

The feasibility of Ni and Cr as barrier layers of metallization systems, Ti/ Ni/ SnAu and Ti/ Cr/ SnAu respectively, were forecasted by studying the Au-Sn-Ni and Au-Sn-Cr ternary phase diagrams.

运用Au-Sn-Ni和Au-Sn-Cr三元相图预测了Ni和Cr作为金刚石热沉金属化体系Ti/Ni/SnAu和Ti/Cr/SnAu的阻挡层的可行性。

Microstructure and Hardness of Cr, B, C Ternary Cast-infiltrated on 45 Steel Surface

45钢表面铬、硼、碳三元铸渗层的组织和硬度

The 873 K Isothermal Section of La-Ni-Cr Ternary System Phase Diagram

La-Ni-Cr三元系600℃等温截面的相关系

Orlane, Paris brings together potent ancient Chinese medicine with highly advanced modern technology to create a powerful anti-aging force: Cr è me Royale.

介绍里说主要利用了中医药素材经过现代科技生产的强力的抗老产品。

Intelligent handling system of the Cr-containing Effluent based on neural network PID

基于神经元网络PID的含铬废水智能处理系统