DSC的例句大全

We have investigated the thermally induced crystalline transformations of Polyvinylidene fluoride and a copolymer of vinylidene fluoride and tetrafluoroethylene using DSC method and infrared spectroscopy.

本文报导利用DSC法及红外光谱法研究聚偏氟乙烯及偏氟乙烯&四氟乙烯共聚物热诱导的晶型转变。

A study of computer aided DSC for the cure reaction kinetics of tetrafunctional epoxy resin

计算机辅助DSC研究四官能环氧树脂固化反应动力学

Nickel phthalate tetrahydrate was synthesized by rheological phase reaction. Its thermal decomposition process in N2 was studied by TG, DTG and DSC, IR, FABMS.

用流变相反应法合成了四水邻苯二甲酸镍，用TG、DTG、DSC、红外光谱、质谱研究了它在氮气气氛中的热分解机理。

Differential scanning calorimetry ( DSC) is a heat analysis method which studies matters' thermodynamic properties according the measured energy differential by temperature scanning under the control of linear temperature programme.

差示扫描量热法是一种在线性温度程序控制下经过温度扫描，以所测能量差来研究物质热力学性质的热分析方法。

The cure kinetics of DGEBA/ Dicyandiamide ( DICY) system was investigated under temperature programming curing condition. Differential Scanning Calorimetry ( DSC) was the thermo-analytical technique used to determine the cure kinetics of this system.

采用程序升温差示扫描量热仪（DSC）法研究了DGEBA／双氰胺（DICY）体系的非等温固化反应动力学。

The chemical components, structure and morphology of copolymer were confirmed by FT-IR, DSC and TEM. The surface property and mechanical properties of fluoroacrylate copolymer emulsion films were determined by water absorption ratio, contact angle and tensile testing machine.

通过FT-IR、DSC、TEM对乳胶膜组成、结构和形貌进行了表征，通过接触角、吸水率和拉力试验机表征了含氟丙烯酸酯共聚物乳胶膜的表面性能和力学性能。

The physical dimensions, tensile-strength, area resistance, DSC curves were measured in the experiments. The multiple separators were applied in testing batteries for initial electrical performance tests.

实验中测量了隔膜的物理尺寸、拉伸强度、面积电阻、示差扫描量热法（DSC）曲线，并应用于实验电池中，对电池电性能做了初步测试。

The melting point and the shear strength of Bi-Pb-Sn-Cd fusible alloys were determined by DSC and tension tester.

利用差热分析仪和拉伸试验机，研究了易熔合金Bi-Pb-Sn-Cd的成分对合金熔点和剪切强度的影响。

The effect of aging and cold working rate on the trans formation properties and the recovery strain in Ti-50. 5mol% Ni shape memory alloy have been investigated with DSC ( Differential Scanning Calorimetry) and mechanical test under a constant stress.

用示差扫描热分析仪（DSC）和恒应力拉伸试验研究了时效和冷加工率对Ti-50.5mol%Ni形状记忆合金相变特性和回复应变的影响。

Coil coatings was thermal analyzed and researched with DSC in order to test glass transition temperature ( Tg) of the paint film at the maximum precoated metal temperature ( PMT) and determine the optimal curing conditions of different coil coatings.

采用DSC进行卷材涂料热分析研究，测试在不同PMT（最高金属板温）下漆膜的Tg，以确定各种卷材涂料的最佳固化条件。

DSC is independent of OS, application software and special nodes.

DSC在设计中实现了与操作系统、应用软件和机群节点的独立性。

During heating, phase transformation and expansibility of the new quartz sands and the quartz sands calcined at 900 ℃ was analyzed by DSC and thermodilatometry.

采用DSC和热膨胀仪对石英新砂和经900℃焙烧砂在加热过程中的相变和热膨胀进行了分析。

The glass transition temperature Tg, melt point Tm, thermogravimetric curve, tensile strength and degradation rate of this blend were determined by DSC, TGA, tensile test and degradation test.

用差示扫描量热法、热重分析法和拉伸试验法等测定了CDA&PLLGA的玻璃化温度、熔点、热失重性能、拉伸强度和降解性能。

The effect of low temperature thermomechanical treatment on precipitation kinetic, mechanical property and fracture morphology, as well as the influence of aging time on tensile property and fracture morphology was studied by means of metallography, Brinell hardness test, tensile test, DSC and TEM.

采用金相、布氏硬度、拉伸、DSC以及扫描电镜等研究手段研究了低温形变热处理对时效析出动力学、力学性能和拉伸断口的影响，以及时效时间对拉伸性能和拉伸断口的影响。

Through DSC analysis, the etherified straw showed glass transition temperature, which indicated the straw has been partly modified into thermoplastic material.

通过差示扫描量热分析可以看出醚化稻草具有玻璃化转变温度，说明稻草部分被改性成热塑性材料。

FTIR, X-ray, DSC and SEM were used to characterize the chemical structure and thermoplasticity of cyanoethylated Wood.

利用，X-ray，DSC，SEM等对氰乙基化木的微观结构和热塑性进行了研究和表征。

Using the methods of thermogravimetry and differential scanning calorimetry ( TG-DSC), study the regularities of fusion characters in different geological time by analyzing the performance of TG-DSC curves through heating process.

利用热重法和差示扫描量热法（TG-DSC），通过对煤灰升温过程在TG-DSC曲线上的表现特征进行分析，研究不同地质年代的煤灰内矿物组成差异对熔融特性的影响规律。

According to DSC and non-isothermal crystallization kinetic analysis, with the increase of PET viscosity, the onset crystallization temperature shifted to the low temperature zone, half-crystallization time shortened and the crystallization rate slowed down.

根据DSC和非等温结晶动力学分析，随着PET粘度增大，结晶峰温度向低温方向偏移，半结晶时间增大，结晶速率降低，结晶变得困难，并且降温速率越快，PET越难结晶。

Success of DSC module is used, has solved the problem constantly, and make the system save the time of developing even more, have raised the efficiency greatly.

DSC模块的成功运用，不断解决了问题，而且使系统更节省开发时间，大大提高了效率。

The analytic results by DSC were verified by aniline titration analysis and FTIR analysis, which further indicated that it was available to block isocyanate by sodium bisulfate.

采用苯胺滴加的方法、FTIR的研究方法，验证亚硫酸氢钠封闭异氰酸酯的反应的可行性，并进一步考证了用DSC方法得到的解封闭温度的正确性。