ECAP的例句大全

Based on the investigation of die angle, pressing route and pressing temperature, the optimum parameters were chosen in the experiments of equal channel angular pressing ( ECAP).

在对等通道角挤压中模具通道夹角、挤压路线和挤压温度研究的基础上，确定了实验中的理想工艺。

The combined effect of two kinds of strengthening mechanisms leads to the fact that the strength of ECAP samples is lower than that of the original sample.

两种强化机制的共同作用导致ECAP样品强度低于初始态样品。

FEA of optimized design for ECAP die

ECAP模具优化设计的有限元分析

Microstructure and mechanical properties of submicrometer 7050 aluminum alloy prepared by ECAP

ECAP制备的亚微米7050铝合金的力学性能和微观结构

Grain-Refining Mechanism of ECAP and Its Effect on Microstructures and Mechanical Properties of Pure Al

ECAP细晶机制及对纯铝显微组织和力学性能的影响

Research on the ECAP Grain Refining Technology, Superplasticity and Isothermal Compression Technological Parameters of 1933 Alloy

1933合金的ECAP细晶化工艺、超塑性及等温压缩工艺参数研究

Equal channel angular pressing process ( ECAP) of pure Al(ⅰ)& microstructure evolution

纯铝等径角挤技术（Ⅰ）&显微组织演化

ECAP deformation is new approach for fabricating high performance magnetic materials with high material utilization and low production cost.

ECAP变形为制备利用率高、成本低的高性能磁性材料提供了一种新途径。

Case study of ECAP rules of arithmetic logics and component types used to logging formation evaluation are made.

给出了测井储层评价算法逻辑的ECAP规则表示事例和测井储层评价的组件类别划分，以及基于ECAP规则的分层应用程序的运行机制描述。

Microstructure and Properties of Commercial Pure Titanium Processed by ECAP at Room Temperature

工业纯钛室温ECAP变形的组织和性能

The increase of ECAP pass number has no effect on grain size, however homogeneity can be improved.

增加ECAP道次对完全再结晶后的晶粒尺寸影响不大，但略微增加晶粒尺寸的均匀性；

This paper studies pure copper's deformation behavior of the ECAP-Conform.

本文研究了纯铜在连续等径角挤压变形过程中的变形行为。

Influence of Hot ECAP and Heat Treatment on Microstructure and Properties of Nano-Metals

热挤压及热处理对等通道挤压法制备纳米级金属组织和性能的影响

The Study on 3-D Finite Element Simulation and Experiment Method for ECAP

等径通道挤压三维有限元模拟及试验方法研究

Of all the SPD methods, ECAP ( Equal Channel Angular Pressing) and HPT ( High Pressure Torsion) are most intensively utilized and investigated.

在常用的强塑性变形方法中，等通道转角挤压和高压扭转法是为材料学家使用和研究最多的两种方法。

The results show that ECAP deformation has a stable texture when shearing deformation is continuously increasing.

结果证明当剪切变形量不断增加时ECAP变形存在一个稳定织构。

Simulation of Strain/ Stress field in ECAP processed pure aluminium

ECAP条件下纯铝的应变行为模拟研究

2224 Aluminum Alloy Modification by ECAP Combined with Heat-treatment

ECAP结合热处理工艺改性2224铝合金

The effect of press temperature on ECAP process of Cu-25.04% Zn-3.83% Al-0.2% Zr ( wt%) shape memory alloy, microstructure and mechanical property ware studied.

研究了挤压温度对Cu Zn Al形状记忆合金等通道转角挤压（ECAP）过程的影响以及挤压后合金组织和性能的变化。

Investigation of Effect of Tensile Property and Fracture Behavior of Pure Aluminum during ECAP

ECAP对纯铝拉伸性能和断裂行为影响的研究