Laser Sensor的例句大全

Twist type surface of robot numeric control auto search plasma quenching system consists of main controller, industry robot, plasma quenching welder, two clamping clip tight devices and laser displacement sensor, etc.

扭型曲面的机器人数字控制自动搜寻等离子淬火系统，由主控计算机、工业机器人、等离子淬火焊机、2套定位夹紧装置和激光位移传感器等组成。

The laser demarcation device Capacitive Inclination Sensor

静电容式倾斜传感器

Research and compared with other types of vibration sensor, the sensor select the integration of standard CMOS process with MEMS technology, not only select laser as a tool but also select silicon material in the process as sensitive inertia material.

研究与比较其他类型的振动传感器，本传感器选用标准的CMOS工艺与MEMS工艺相结合，以激光作为探测工具，以硅工艺中的硅材料作为敏感惯性材料。

A novel laser diode theodolite which is suitable for using in the field is developed with using laser diode as light source and linear array CCD as photoelectric sensor.

采用半导体激光器作光源、线阵CCD作光电传感器研制了一台全新的、适于野外使用的半导体激光经纬仪。

Laser triangulation measurement is one of the main methods of noncontact measurement. Many questions, have been studied in the measuring system, regarded Position Sensitive Detector ( PSD) as the photoelectric sensor.

激光三角测量是非常重要的非接触测量方法，本文研究了以PSD作为光电传感器的测量系统中的一些问题。

A seeding monitoring optoelectronic sensor for precision planter was designed using red laser diode ( RLD) and silicon photocell.

提出了排种检测光电传感器的覆盖率问题，并利用红光半导体激光二极管（RLD）和硅光电池构造了一种高覆盖率的排种传感器。

The system consists of main controller, robot, plasma quenching welder, two fixing-clamping devices for vane, laser shift sensor and so on.

系统由主控计算机、机器人、等离子淬火焊机、2套叶片定位夹紧装置和激光位移传感器等组成。

A New Type Vibration Sensor of Laser Doppler Technology

一种新型激光多普勒振动传感器

Effect of Laser Random Phase Noise on the Fiber-optic Sensor System

激光随机位相噪声对光纤传感系统的影响

The response characters of the visible light band Si-CCD image sensor to the irradiation of in-band and off-band laser respectively are studied in detail. The laser includes different modes of CW ( Continuous Wave) and PW ( Pulse Wave).

本文较为系统地研究了波段外、波段内激光对面阵Si-CCD器件的辐照效应，而且是以多种工作方式（连续光和不同脉冲宽度的脉冲光）激光作为光源。

To a dual-band IR sensor, the whole hardware-in-the-loop simulation system's requirements is analyzed in this thesis, and on the basis of this, the requirements of control subsystem is studied, which include laser control and data acquisition.

针对某型双色红外敏感器，本文分析了整个半实物仿真系统的系统需求，在此基础上研究了光源控制与数据采集硬件控制子系统的性能要求，并设计研制成功，通过项目验收。

Some results in the study of fluoride glass fiber were reported. The applications of fluoride glass IR fiber in telecommunication, IR fiber laser and amplifier, IR sensor and high power deliver were introduced.

报道氟化物玻璃红外光纤的研制结果，介绍氟化物玻璃红外光纤在光纤通信、纤维激光器和光放大器以及红外传感传能等领域的应用前景。

This paper introduces a new online method to measure the dimension of large forgings, which uses the pulsed laser ranging sensor with a2-DOF parallel spherical mechanism.

介绍了使用激光测距传感器配合球面二自由度并联机构测量大锻件尺寸的方法。

In this thesis, based on the CD ROM laser auto-focusing detecting principle, a low-cost, high-precision, non-contact micro-displacement measurement sensor system is developed.

本文基于激光自动聚焦探测原理研究开发了一种低成本、高精度的非接触式微位移传感器。

according to the triangle measuring principle, a binocular stereo vision sensor made of one laser line projector and two ccd cameras is studied.

研究了按照激光三角测量原理由1个线激光器及2个CCD摄像机组成的双目视觉测量传感器。

vision sensor based on laser structured light uses triangulation principle which laser structured light plane projects onto the workpiece surface at a certain angle and form feature laser stripe. a ccd camera with filter obtain laser stripe image in weld area.

基于激光结构光的视觉传感器采用三角测量原理[1,2]，激光结构光平面倾斜投射到工件表面形成特征激光条纹，一个带有滤光片的CCD摄像机采集焊缝区域激光条纹图像。

the laser vision sensor based on triangulation principle can extract welding seam feature point for autonomous seam tracing and welding.

激光视觉传感器基于三角测量原理，根据提取焊缝的特征点，实现焊缝的自主跟踪和焊接。

the unit consists of three parts for detection, electrical source and control. the detection part is a main body and it includes detecting arm, abrasion encoder, laser ranging sensor and central line photoelectric sensor.

该装置包括检测、电源和控制三大部分，检测部分是主体，由检测手臂、磨耗编码器、激光距离检测传感器和中心线光电传感器组成。

based on information from laser radar sensor, a real-time obstacle avoidance algorithm and the strategy of breaking away from dead state are also designed.

根据激光雷达传感器信息设计了基于栅格的实时避障算法和解锁策略。

The optical system of the sensor is a right-angle scattering optics. A high-power laser diode module is used as the light source, and a PIN photodiode with high performance is used as the photo-detector.

该传感器采用直角散射光收集形式，以高功率半导体激光器作为光源，同时采用高性能的PIN型光电二极管作为光电探测器。