NI的例句大全

MAG welding of low-temperature steel 12 Ni 14

12Ni14低温钢MAG焊接

Welding Technology for STPL-46 ( 3.5Ni) Low Temperature Steel

STPL-46（3.5Ni）低温钢焊接技术

Effect of High Temperature Treatment on the Ni-plating Hardened by SiC Grains

高温处理对SiC颗粒增强镍镀层的影响

Objective: To evaluate the clinical effect of galvano-ceramic bridges made by Ni-Cr pontic fired bonding galvano caps with highly temperature-resistant adhesive based on three-year clinical trials.

目的：观察金沉积基底冠熔结镍铬桥体烤瓷桥的临床修复效果，为临床利用金沉积技术制作烤瓷桥修复提供参考。

Hardness and strength of the substrate of vacuum melting Ni based alloy-WC composite coating is low. After hardening and tempering, hardness and strength of the substrate was increased.

经过真空熔烧Ni基合金+WC复合涂层的45钢基体的硬度和强度都很低，为了提高基体的硬度，对涂层后的材料进行调质处理。

Effect of Tempering Temperature on Structures and Properties of Ni-Cr-Al Hard Elastic Alloys

回火温度对Ni－Cr－Al硬弹合金组织和性能的影响

Template Synthesis and Crystal Structures of Macrocyclic Cu(ⅱ) and Ni(ⅱ) Complexes

大环金属铜（Ⅱ）、镍（Ⅱ）配合物的模板合成与晶体结构

And the tensile strength and elasticity modulus would decrease with the increase of the PTWs content, while the elongation, area reduction and the crack density of the fracture side of Ni-P-PTWs composite coatings samples increased.

随着PTWs含量的增加，Ni-P-PTWs复合镀试样的抗拉强度和弹性模量降低，而最大延伸率、断面收缩率和拉伸断口侧面的裂纹密度增加。

The article describes the on-line automatic measurement methods of Ni-wire resistance per meter and of wire diameter, in which the disc contact type sensor with four terminal structure is used.

本文叙述了采用四端结构的圆盘接触式传感器，可自动、在线检测彩管发泡镍丝米电阻和线径值。

Measurement and calculation of specific heat for a liquid Ni-Cu-Fe ternary alloy

液态三元Ni-Cu-Fe合金比热的实验与计算研究

Preparation and Formation Mechanism of Ni-based Ternary Alloy

Ni基三元合金的制备与形成机理研究

A Study on Chemical Plating of Ni-W-P Ternary Alloy

镍-钨-磷合金化学镀的研究

Study on the Electroless Technique of Ni-W-P Ternary Alloy

化学镀Ni-W-P三元合金工艺的研究

Auto Directional Solidification of Undercooled Cu Ni Fe Ternary Alloy

深过冷Cu-Ni-Fe三元合金自定向快速凝固

Preparation of Electroless Plating Ni-Cu-P Ternary Alloy Deposition and Study on Its, Microstructure and Property

化学镀镍-铜-磷三元合金层的制备及其组织与性能研究

Al-Cu-Ni ternary alloy powders were fabricated with a new solid-liquid reaction milling technology.

利用固液反应球磨技术制备了Al-Cu-Ni三元合金粉末。

Microstructure of Al-Ni-Y Ternary Alloy with Directional Solidification Under Different Stretching Velocities

Al-Ni-Y三元合金不同拉伸速率的定向凝固组织

The 3D Cellular Automata Simulation of The Ordering Kinetics in Ni-Al-X Ternary Alloy

Ni-Al-X合金有序化转变的三维元胞自动机模拟

Electrodeposition of Ni-W-P ternary alloy was investigated.

研究了Ni-W-P三元合金层的电沉积方法；

Structure of Electroless Ni-Cr-P Ternary Alloy Deposit

Ni-Cr-P三元合金化学镀层的组织结构