Time Parameters的例句大全

The parameters of process, including reaction temperature, reaction time, ratio of reaction materials were determined.

确定了各步反应的反应温度、反应时间、反应物当量比等合成工艺参数，并通过红外光谱表征了产物结构。

In this paper, methods of testing linearity and time response parameters of photomultiplier tube are introduced and illustrated.

介绍了光电倍增管线性特性、时间特性参数的调试方法及举例。

Simulating results show that the disturbing airflow between the carrier and vehicle affect the safety of TAV. Reasonable igniting time selection and slow pulling-up maneuver are also important to flight parameters of preliminary phase.

对此进行了分析研究，仿真结果表明分离时刻载机与飞行器之间的干扰气流影响飞行安全；点火时机合理地选择、缓和拉起爬升动作对爬升初始阶段飞行参数稳定合理地变化也很重要；

The research results are as follows: 1. The main parameters that influence the Supercritical CO2 extraction are extraction pressure, extraction temperature, extraction time, separation pressure and separation temperature.

取得以下研究结果：1.影响超临界萃取工艺的主要参数有萃取压力、萃取温度、萃取时间、分离压力及分离温度。

It explores the influence of different extraction conditions ( extraction pressure, extraction temperature, extraction time, separation pressure and separation temperature) and optimizes the technical parameters of the oil extraction from above seeds.

探讨了不同萃取条件（萃取压力、萃取温度、萃取时间、分离压力和分离温度）对提取率的影响，探讨提取上述种籽油脂的最佳工艺参数。

The time-variance of plant parameters, which is not considered usually by traditional control methods, is one of the main problems in the application of active noise control.

控制对象参数的时变是噪声有源控制付诸实际应用所面临的主要问题之，传统的控制方法通常不考虑对象参数时变。

Influence analysis and self-adaptive optimization of support vector machine time series forecasting model parameters

支持向量机时间序列预测模型的参数影响分析与自适应优化

The time series method is introduced to identify the modal parameters of a clamed beam.

引入时间序列法对悬臂梁的模态参数进行了辨识；

Estimators of Parameters in A Single Index Time Series Model

单指标时间序列模型参数估计

Identification of time-varying modal parameters of structure using output error time series model

利用输出误差时间序列模型识别结构时变模态参数

According to the time window shifting manner, each system node dynamically generates these parameters and forms a failure character record corresponding to its current status. The status information will be used for system failure prediction.

系统结点按照窗口滑动的方式动态地生成与结点当前状态相对应的特征参数记录，并将其应用于各结点的故障预测过程中。

Our results show that, when the two lower levels of the atom is degenerate, dipole squeezing parameters evolve periodically with time, and the splitting of the lower levels destroy this periodicity and reduce the amount of dipole squeezing.

结果表明，当原子两下能级简并时，原子偶极参量随时间周期性演化，原子两下能级裂距破坏这种周期性并降低压缩量。

The characterization of the multi-path channel and fading channel are discussed, and the characteristic parameters of the channel describing is used to give the channel sorting based on multi-path time spread and Doppler frequence spread.

讨论了多径信道和衰落信道的表征，利用信道描述的特征参数给出了基于多径扩展和多谱勒扩展的信道分类。

The natural frequency and damping ratio are the main parameters affecting frequency response errors. Transient response errors are related to the product of natural frequency and the rising edge time of the measured thrust.

固有频率和阻尼比是影响频率响应误差的主要参数，而瞬态响应误差则与固有频率和被测推力的上升沿时间的乘积有关。

The parameters describing the properties of the space-time cross-correlation of dynamic speckles are given under some special conditions, as spatial correlation length, correlation time, translation distance and correlation distance.

给出了几种特定情况下描述动态散斑时间-空间相关性质的参数&动态散斑的空间相关长度，动态散斑的相关时间，动态散斑的平移距离和相关距离。

Research on the Influence of the Hydrogeologic Parameters ′ Time Variability to the Calculation of Underground Water Unsteady Flow

水文地质参数时变性对地下水非恒定流计算的影响

Based on the system is of the characteristics of coupling effect, the difference between two motors 'transfer functions and system parameters' time variability, the thesis proposed a synchronization control based on synchro-error feedback.

针对转台中框同步驱动系统所具有的耦合作用、两同步通道传递函数的差异等特点，提出一种基于校正的同步误差反馈的等同式同步控制方法，仿真结果表明该控制策略合理可行。

Combining the qualitative knowledge and quantitative mathematical information of system, the approach provides good control over the nonlinear time varying system with wide variation of parameters.

该方法充分结合系统的定性知识和定量数学描述信息，实现了参数大范围变化时变系统的良好控制。

These parameters included vector number, embedding dimension, time delay and vector delay At last the result of analysis was given.

在此基础上讨论了在计算关联维数时如何选择合适的重构相空间的矢量数、嵌入维数、时间延迟及矢量间间距等参数，最后给出了分析结果。

Depending on the system parameters, either TE or TM surface modes have the time averaged Poynting vector directed opposite or same to the mode phase velocity.

TE表面模式或TM表面模式的时间平均坡印亭矢量与模式相速度的方向依赖于系统参数，或是相反或是相同。