Tungsten的例句大全

This paper introduces the development prospect of applying tungsten-rhenium thermal couple to continuous measurement of molten steel temperature.

本文介绍钨铼热电偶用于钢水连续测温的开发前景；

Thermal desorption spectra of propene and oxygen adsorbed on blue tungsten oxide

蓝色氧化钨吸附丙烯和氧的热脱附谱

The results show that thermal treatment and dispersion strengthening action of silicon carbide greatly improve hardness, wear resistance and resistance to oxidation at high temperature of amorphous nickel-tungsten-carbide deposit.

结果表明：碳化硅的弥散强化作用和热处理能显著提高复合镀层的硬度、耐磨性和抗高温氧化性。

In this thesis, the spectral and thermal experiments results of CBN-28 were introduced, and were compared with some other tetragonal tungsten bronze crystals.

本文对CBN-28晶体的光谱特性和热特性进行了实验结果进行了介绍，并与其他钨青铜结构铌酸盐晶体进行了比较分析。

Macroscopic and microscopic mechanical analysis of thermal shock resistance of tungsten based composites

钨基复合材料抗热震性能的宏细观力学分析

The results gained in this paper are useful to the fabrications of CVD thermionic energy converter's tungsten emitter and the processing of etching { 110} plans.

研究工作得到的结论对国内用CVD方法制备热离子能量转换器发射极W涂层材料、发射极表面用电解蚀刻工艺制备高分额的{110}晶面等都具有重要的参考价值。

The material of 110-oriented monocrystal tungsten which was achieved by the technique of chemical vapor deposition on the substrate of monocrystal molybdenum alloy is one of the most promising materials which have been currently utilized for the emitter of thermionic energy converter.

合金化钼单晶基体表面气相沉积钨{110}择优取向钨单晶涂层是一种性能优越的热离子转换器的发射极材料。

Effects of Ti/ Ni Transition Layers on Frictional Behavior of Tungsten Disulfide Thin Film

Ti/Ni过渡层对WS2薄膜摩擦学性能影响高效薄层色谱分析法

Deposition was carried out by passing gaseous mixture of hydrocarbon and hydrogen through a heated reaction chamber, in which a hot tungsten filament was held near the substrates.

合成过程中碳氢化合物和氢气的混合气体通入由热丝辐射加热的沉积室内，基体硅片置于热丝下方附近。

The experiment results show that the connection zone may be divided into multicomponent eutectoid, tungsten carbide and narrow ferrite and the interface is found to be a metallurgical bond because of the element diffusion, metallurgy reaction and formation of the new compound phase during the cast-in process.

实验结果表明：结合层是由窄小的铁素体带和多元共析体+条块状WC组成，界面元素发生扩散及冶金反应并有新相产生，呈典型的冶金结合。

Preparation of the hexagonal tungsten oxide h Na x WO 3

新的六方晶钨氧化合物Na xWO3的制备

Ultrasonic frequency pulse tungsten inert gas welding power source topology and welding applicability

超音频脉冲TIG焊电源拓扑及电弧焊适用性

Numerical Analysis on Tungsten Inert Gas Welding Arc

钨极氩弧焊焊接电弧数值分析

This is a better method. However, it should avoid causing irreparable damage in the use of carbon-tungsten.

此为较好的使用方法。但应在使用碳钨钻时避免对釉面造成无法弥补的损伤。

Application of thin kerf tungsten carbide saw blades

薄锯路硬质合金圆锯片应用浅释

The result of study shows that the delay time of composition is high precise when the content of tungsten is in range of 20%~ 40%.

研究结果表明：钨含量在20%～40%范围内，可以制得延期精度较高的药剂。

Study of decrease in volume of agglomerates in fine particle tungsten carbide

降低细颗粒碳化钨中聚集体量的研究

In drilling cobble and gravel formation, diamond enhanced tungsten carbide composite spherical crown button bits without strengthened gage achieve an average drilling rate of2.

介绍了金刚石&硬质合金复合球齿钻头在内蒙古某地区铀矿床卵砾石层中的生产试验情况。

Diamond enhanced tungsten carbide composite spherical crown button bits with strengthened gage achieve an average drilling rate of 2.82 m/ h and an average service life of 10.18 m;

保径加强型金刚石&硬质合金复合球齿钻头的平均钻进效率为2.82m/h，钻头的平均寿命为10.18m/个；

The specific structure, technological characteristics and the operation principle of the spiral chute are briefly described in the paper, emphasis being laid on its practice of separating hematite, tin, tungsten, tantalum and niobium ores and other heavy minerals.

本文简要介绍了螺旋溜槽的结构特点，技术特性和选别原理。着重叙述了螺旋溜槽选别赤铁矿、锡矿、钨矿，钽铌矿和其它重矿物的选别实践。