UHMWPE的例句大全

Study on structure and property of UHMWPE fiber during super drawing

超拉伸过程中UHMWPE纤维结构与性能的研究

the decomposing temperature of complex of copper nitrate with 15-c-5 is over the processing temperature of uhmwpe, so it is used filling in uhmwpe.

15-冠-5与硝酸铜配合物的分解温度超过了UHMWPE的加工温度，决定用它对UHMWPE进行填充改性。

a tribological study on schiff base copper complex modifying uhmwpe and lubricants

Schiff碱铜络合物改性超高分子量聚乙烯及润滑油的摩擦学研究

Study on the formation mechanism of supermolecular structure of shish kebab s of gel-spun UHMWPE Fibers

超高分子量聚乙烯（UHMWPE）凝胶纤维串晶结构形成机理的研究

The results showed that HDPE ( 6098) was adequate to improve the UHMWPE processing property and the optimal ratio by weight of UHMWPE/ HDPE was 40/ 60 ( shortened form PE2 in this paper).

结果表明：采用HDPE（6098）与UHMWPE熔融共混，当配比为40／60时（文中简称PE2），共混合金的力学性能、加工性能最佳。

The preparation methods of two kinds of sliding blocks made from ultra high molecular weight polyethylene ( UHMWPE) composite and pure polytetrafluorethylene ( PTFE) powder were introduced respectively.

介绍超高分子量聚乙烯（UHMWPE）和聚四氟乙烯（PTFE）两款桥梁支座滑块的制备方法，并对滑块的性能进行了研究。

study on the friction and wear properties of uhmwpe/ sio_2 composite materials

UHMWPE/纳米SiO2复合弹性材料的摩擦磨损性能研究

The extracting mechanism of UHMWPE gel-spun fiber was discussed.

探讨了超高相对分子质量聚乙烯（UHMWPE）冻胶纤维的萃取机理。

The crystallization was easy for lower relative molecular weight UHMWPE sample.

相对分子质量较小的UHMWPE易结晶；

The melting behavior of ultrahigh relative molecular weight polyethylene ( UHMWPE) fiber was studied by DSC.

用DSC法研究了超高相对分子质量聚乙烯（UHMWPE）纤维的熔融行为。

In the course of friction and wear, the debris produced by M-UHMWPE and LLDPE transfer to the worn surface exits in the contact surface, which act as anti-friction and wear-resisting agent.

在摩擦过程四川大学褚项I学位论文中，M一UHMwPE和LLDPE向磨擦界面转移产生的磨屑分布于摩擦界面，起到了减摩耐磨剂的作用。

By the FT-IR testing of the grafted UHMWPE fabric, we discovered that some new polar groups were introduced to the surface.

通过扫描电镜可以准确直观地观察到天津工业大学硕士学位论文UHMWPE纤维表面接枝效果。通过对接枝UHMWPE织物的红外光谱分析，发现其表面引入了许多新的极性基团。

Ultra-high molecular weight polyethylene ( UHMWPE) has been used as a major bearing materials in total joint replacement with satisfactory clinical results due to its superior wear resistance and excellent biocompatibility.

超高分子量聚乙烯（UHMWPE）由于具有良好的耐磨性以及优异的生物相容性，已被作为人工关节组件之一。

Study on UHMWPE Wear Debris Morphology in Artificial Hip Joints

人工髋关节UHMWPE磨粒形态研究

Equilibrium and non equilibrium phase diagrams of UHMWPE mineral oil binary system are measured and discussed in the paper. Scanning electronic microscope ( SEM) is used to determine the formation mechanism of the different microstructures and to research the effect of quenching speed on the phase separation.

通过UHMWPE石蜡油二元体系平衡态和非平衡态相图的测定，利用扫描电子显微镜（SEM）研究了二元体系的相分离过程以及不同冷却速度下形成的微观结构。

advance in research on modification of uhmwpe for displaceable material of artificial joint

人工关节置换材料——超高摩尔质量聚乙烯改性研究的进展

study on degradation, friction and wear behaviors of ozonized uhmwpe

UHMWPE的臭氧化降解及摩擦磨损性能研究

the adhesion to substrate and friction and wear properties of the glc film on uhmwpe substrate were investigated using a scratch tester and a ball-on-disk tribometer respectively.

用划痕仪和球-盘式摩擦磨损机研究了GLC薄膜与UHMWPE基体的界面结合力和GLC薄膜的摩擦磨损性能。

introduce the properties of uhmwpe and its application in the mining machines.

介绍了超高分子量聚乙烯的特点及其在矿山机械中的应用情况。

study on structure and properties of multistage drawing uhmwpe fiber

多级拉伸中超高相对分子质量聚乙烯纤维的结构与性能研究