axis error的例句大全

The adaptive law with the differential term and the control law with integral term of d-q axis current error are deduced by constructing the suitable Lyapunov function, and the anti-windup integrator is added to improve the dynamic performance.

通过构造适当的李雅普诺夫函数，推导出带d-q轴电流误差微分项的自适应律和带d-q轴电流误差积分项的控制律，并引入抗饱和积分器，提高系统的动态性能。

Results show that thermal drift along Z axis is the greatest contributor to the spindle thermal error which can reach about 50 μ m with an error of 1.0 μ m.

实验结果表明，所测立式加工中心主轴热误差沿Z轴方向最大，约为50μm，测量误差约为10μm。

An Autocollimation Method of Measuring the Level Error of the Horizontal Axis of A Meridian Instrument

测定子午仪水平轴水平差的轴准直方法

The presence of stable zeros near or on the j ω axis shows that there is trade offs between the tracking error and the settling time.

接近虚轴或虚轴上的稳定零的存在表明跟踪误差与调节时间之间存在某种折中。

This subject is about thermal deformation error detection and compensation of an YKX3132G six axes CNC gear-hobber machine's worktable in X axis direction.

本课题针对在KX3132G型六轴数控滚齿机床加工过程中，工作台热致变形产生的X轴方向上的误差进行测量与补偿。

Study on Mechanism and Driving Error of θ Axis for the Abrasive Dicing Saw

砂轮划片机θ向机构和传动误差分析

there are many influencing factors for resolving ratio of tcecs, which are elliptical eccentricity, aperture width, light source not locating in the front focus of ellipse, the axis of detector does not pass through the back focus, aiming and alignment error.

TCECS分辨率的影响因素较多，主要有椭圆的离心率、狭缝的宽度、光源没在椭圆的前焦点上、探测圆轴线没有通过椭圆后焦点、瞄准对中等引起的误差。

The Contrast of Two Methods of Measuring Wobble Error in Perpendicular Axis System

竖直轴系倾角回转误差的两种测试方法的比较

The position relationship between beam axis and shaft axis was discussed in lapping with bending disk. The equation denoting the best distance of beam axis and shaft axis was set up, and the error was analyzed.

本文讨论了磨具弯曲成形法中梁轴线与转轴中心线位置之间的关系，给出确定梁轴线与转轴之间最佳距离的计算公式及误差分析。